Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Pyramid 2022SX 3-Way Indoor/Outdoor Speaker System. Designed for versatile use, these speakers deliver clear audio for various environments, including home, patio, and commercial spaces. Please read this manual thoroughly before use to ensure proper setup and optimal performance.
Package Contents
Verify that all items listed below are included in your package:
- Pair of Pyramid 2022SX Mini Box Ceiling/Wall Mount Speakers
- Mounting Brackets (2)
- Installation Hardware (screws, knobs)
- Speaker Wires
- Quick Start Guide
- Warranty Card
Setup and Installation
The Pyramid 2022SX speakers are designed for universal mounting, allowing installation on walls, ceilings, support bars, or frames. Ensure the mounting surface is capable of supporting the speaker's weight (approximately 3.39 lbs per pair).
Mounting Instructions:
- Select Location: Choose a suitable indoor or outdoor location for optimal sound dispersion. Consider proximity to your audio source.
- Attach Brackets: Secure the mounting brackets to your chosen surface (wall, ceiling, etc.) using the provided screws. Ensure the brackets are firmly attached.
- Position Speakers: Attach the speakers to the mounting brackets using the included knobs. Adjust the angle of the speakers for desired sound direction.
Wiring Connections:
Connect the speakers to your audio amplifier or receiver using the provided speaker wires. The speakers feature quick connect/disconnect terminals for easy wiring.
- Ensure your amplifier/receiver is turned off before making any connections.
- Connect the positive (+) terminal of the speaker to the positive (+) terminal of your amplifier.
- Connect the negative (-) terminal of the speaker to the negative (-) terminal of your amplifier.
- Maintain correct polarity for both speakers to ensure proper stereo imaging.
Operating Instructions
Once properly installed and connected, your Pyramid 2022SX speaker system is ready for use. These speakers are compatible with a wide range of audio equipment, including home theater systems, PA systems, computers, DVD players, and music players.
- Power On: Turn on your audio amplifier/receiver and the connected audio source.
- Volume Control: Adjust the volume level on your amplifier/receiver to a comfortable listening level. Avoid excessively high volumes to prevent distortion or damage to the speakers.
- Sound Quality: The 3-way design, featuring a 1" super dome tweeter, 3.25" long excursion woofer, and 1.75" wide dispersion cone midrange, provides a balanced audio experience. The bass reflex cabinets enhance low-frequency response.
Maintenance
The Pyramid 2022SX speakers are designed with durability in mind, featuring corrosion and stain-resistant removable mesh grills. Regular maintenance will help ensure their longevity and performance.
- Cleaning: Use a soft, dry cloth to wipe down the speaker cabinets. For the mesh grills, gently remove them and clean with a soft brush or damp cloth if necessary. Ensure they are dry before reattaching.
- Environmental Protection: While designed for indoor/outdoor use, prolonged exposure to extreme weather conditions (heavy rain, direct sunlight, extreme temperatures) should be minimized to extend product life.
- Inspection: Periodically check mounting hardware for tightness and speaker wires for any signs of wear or damage.
Troubleshooting
If you encounter issues with your speaker system, refer to the following common troubleshooting steps:
- No Sound:
- Ensure all audio components (amplifier, source device) are powered on.
- Verify speaker wire connections at both the speakers and the amplifier. Check for correct polarity (+ to + and - to -).
- Confirm the volume on your amplifier/receiver is turned up and not muted.
- Test with a different audio source or amplifier if possible.
- Distorted Sound:
- Reduce the volume level on your amplifier/receiver.
- Check speaker wire connections for any loose strands or short circuits.
- Ensure the audio source is not overdriving the amplifier.
- One Speaker Not Working:
- Check the wiring for the non-working speaker.
- Swap the speakers' connections at the amplifier to determine if the issue is with the speaker or the amplifier channel.
Specifications
| Feature | Specification |
|---|---|
| Model Name | 2022SX |
| Speaker Type | 3-Way Indoor/Outdoor Mini Box Speaker System |
| Peak Power Output | 200 Watts |
| RMS Power Output | 100 Watts |
| Woofer Diameter | 3.25 Inches (Long Excursion) |
| Midrange Diameter | 1.75 Inches (Wide Dispersion Cone) |
| Tweeter Diameter | 1 Inch (Super Dome) |
| Frequency Response | 70Hz - 21kHz |
| Impedance | 4 Ohm |
| SPL | 94dB |
| Magnet Structure | 24 oz |
| Cabinet Material | Heavy-Duty ABS with Butyl Rubber Surround |
| Product Dimensions (each) | Approx. 5.25''W x 3.75''H x 3.75''D (4.33"D x 8.86"W x 6.5"H including bracket) |
| Item Weight (pair) | 3.39 lbs (1.5 kg) |
| Mounting Type | Wall Mount, Ceiling Mount (Universal) |
| Connectivity Technology | Spring Clip Terminal |
| Included Components | Speakers (Pair), Mounting Brackets, Installation Hardware, Speaker Wires, Quick Start Guide, Warranty Card |
Warranty and Support
The Pyramid 2022SX Speaker System comes with a 1-YEAR Limited Warranty. Please refer to the included Warranty Card for detailed terms and conditions.
For technical support or warranty claims, please contact Pyramid customer service. Contact information can typically be found on the warranty card or the official Pyramid website.
Important: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please refer to the product packaging or the manufacturer's website.
