1. Introduction
Thank you for purchasing the ORE International 6866G Floor Lamp. This traditional-style lighting fixture features a polished brass finish and elegant crystal accents. Designed for indoor use, it provides ambient lighting suitable for various living spaces such as living rooms, dining rooms, and offices. This manual provides detailed instructions for safe assembly, operation, and maintenance of your new floor lamp.
Image 1.1: The ORE International 6866G Floor Lamp, showcasing its polished brass finish and crystal chandelier-style lights.
2. Safety Instructions
Please read and understand all instructions before assembling and operating this lamp. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- Always disconnect the power supply before assembly, maintenance, or bulb replacement.
- Do not exceed the maximum wattage specified for the light bulbs (12 watts per bulb).
- Ensure all electrical connections are secure and properly tightened before plugging the lamp into an outlet.
- Keep the lamp away from water and moisture. This product is for indoor use only and is not water-resistant.
- Handle crystal components with care to prevent breakage or injury.
- Place the lamp on a stable, level surface to prevent tipping.
- Keep flammable materials away from the light bulbs.
3. Package Contents
Carefully unpack all components and check against the list below. If any parts are missing or damaged, do not attempt to assemble the lamp. Contact customer support for assistance.
- Lamp Base
- Lower Pole Section
- Middle Pole Section
- Upper Pole Section with Lamp Head/Fixture
- Crystal Accents (pre-attached or separate for installation)
- Instruction Manual
4. Assembly Instructions
Assembly is required for this floor lamp. Follow these steps carefully:
- Unpack Components: Remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratching. Verify all parts are present according to the package contents list.
- Assemble Pole Sections: Carefully thread the lower pole section into the lamp base. Turn clockwise until securely tightened. Repeat this process for the middle and upper pole sections, ensuring each connection is firm.
- Attach Lamp Head: The lamp head/fixture is typically pre-attached to the upper pole section. If not, carefully thread it onto the top of the upper pole section and tighten.
- Install Crystal Accents: If the crystal accents are not pre-installed, carefully attach them to the designated hooks or slots on the lamp head/fixture. Refer to the product image for correct placement.
- Insert Light Bulbs: Screw three E26 base light bulbs (not included) into the sockets on the lamp head. Ensure the wattage does not exceed 12 watts per bulb.
- Position Lamp: Place the assembled lamp in your desired location, ensuring the power cord can reach a suitable 120V outlet without being strained or obstructed.
5. Operating Instructions
The ORE International 6866G Floor Lamp features a convenient 3-way touch control switch.
- Connect Power: Plug the lamp's power cord into a standard 120V electrical outlet.
- Activate Lamp: Gently touch any metal part of the lamp (base or pole) to turn it on and cycle through the lighting settings.
- 3-Way Lighting: The touch switch provides three levels of illumination:
- First Touch: One light illuminates.
- Second Touch: Two lights illuminate.
- Third Touch: All three lights illuminate.
- Fourth Touch: All lights turn off.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your lamp.
- Cleaning: Disconnect the lamp from the power outlet before cleaning. Wipe metal surfaces with a soft, dry cloth. For crystal accents, use a soft, damp cloth with a mild glass cleaner, then dry immediately with a lint-free cloth. Avoid using abrasive cleaners, solvents, or polishes that could damage the finish.
- Bulb Replacement: Ensure the lamp is unplugged and bulbs have cooled completely before attempting to replace them. Unscrew the old bulb(s) and replace with new E26 base bulbs, ensuring they do not exceed the maximum 12-watt rating.
7. Troubleshooting
If you encounter issues with your lamp, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light | 1. Lamp not plugged in 2. Loose or burnt-out bulb(s) 3. Power outlet not working | 1. Ensure the lamp is securely plugged into a working electrical outlet. 2. Check that bulbs are screwed in tightly and replace any burnt-out bulbs. 3. Test the outlet with another appliance to confirm it has power. |
| Lights flicker | 1. Loose bulb connection 2. Incompatible bulb type 3. Faulty touch sensor | 1. Tighten all light bulbs securely. 2. Ensure bulbs are compatible with a 3-way touch switch. Try different bulbs. 3. If flickering persists after checking bulbs, contact customer support. |
8. Specifications
Key technical specifications for the ORE International 6866G Floor Lamp:
| Feature | Specification |
|---|---|
| Model Number | 6866G |
| Dimensions (Overall) | 63" H x 19" W x 19" D (Approximate) |
| Product Dimensions (Base) | 38"D x 15"W x 7"H (Note: This appears to be a partial dimension or for a specific component, refer to overall for full lamp size) |
| Material | Metal (Brass finish), Acrylic/Crystal |
| Finish Type | Polished Brass |
| Bulb Base | E26 |
| Number of Light Sources | 3 |
| Max Wattage (per bulb) | 12 watts |
| Voltage | 120 Volts |
| Control Method | Touch (3-Way) |
| Indoor/Outdoor Usage | Indoor |
| Certification | UL Listed |
| Item Weight | 16.61 pounds |
9. Warranty and Support
No specific warranty information is provided in the product data. For warranty inquiries, missing parts, or technical support, please contact ORE International customer service directly or refer to the retailer's return policy where the product was purchased.