Product Overview
The Walker Exhaust 31400 Exhaust Pipe Flange Gasket is designed to complete exhaust system repairs. It is engineered to work seamlessly with both Original Equipment (OE) exhaust components and Walker aftermarket replacement parts. This gasket is crucial for creating a tight seal in the exhaust system, preventing leaks and ensuring proper function.
Image: The Walker Exhaust 31400 Exhaust Pipe Flange Gasket, a round, metallic-looking gasket designed for exhaust pipe connections.
Key Features
- Deflects Heat: Designed to deflect heat for long-lasting performance in high-temperature exhaust environments.
- Premium Materials: Manufactured from high-quality materials to ensure durability and extended service life.
- Engineering Expertise: Parts are rigorously reviewed, validated, and approved by Walker engineers through extensive research and development.
- Real-World Tested: Components are tested on-vehicle and validated to ensure optimal performance under actual driving conditions.
Compatibility
The Walker Exhaust 31400 Exhaust Pipe Flange Gasket is compatible with a wide range of vehicles. Specific fitments include:
- 1981-1982 Isuzu Pickup
- 1964-1969 Jeep Dispatcher
- 1958 Chevrolet Biscayne (and other models as per detailed fitment guides)
Before purchasing and installing, it is essential to research and confirm that this part will fit your specific vehicle. Always enter all vehicle information (year, make, model, engine, and trim) for accurate compatibility checks and review any qualifier notes provided by the manufacturer or retailer.
Image: A display of various Walker exhaust gaskets, including round and triangular flange gaskets, illustrating the range of available styles and sizes.
What's in the Box
Each package of Walker Exhaust 31400 Exhaust Pipe Flange Gasket contains:
- 1 x Exhaust Gasket
Installation Instructions (Setup)
Proper installation of the exhaust pipe flange gasket is critical for the integrity and performance of your vehicle's exhaust system. While specific steps may vary by vehicle, the following general guidelines apply:
General Installation Advice
- Preparation: Ensure the mating surfaces of the exhaust pipes are clean and free of old gasket material, rust, or debris.
- Positioning: The gasket is designed for easier installation, often featuring slotted bolt holes (where applicable) to allow the gasket to slip into place smoothly.
- Tightening: Secure the exhaust pipes together using appropriate fasteners. Tighten bolts evenly and to the manufacturer's specified torque settings to ensure a proper, leak-free seal. Overtightening can damage the gasket or flange.
- Safety: Always work on a cool exhaust system. Use appropriate safety gear, including gloves and eye protection. If working under the vehicle, ensure it is securely supported on jack stands.
Image: A technician using a caliper to measure an exhaust pipe, emphasizing the importance of precise fitment during installation.
Image: A gloved hand installing a rubber exhaust mount, demonstrating a step in the exhaust system assembly process.
Recommended Accessories
For a complete exhaust system upgrade and optimal performance, it is recommended to use premium Walker accessories when installing Walker catalytic converters and mufflers. These accessories are designed to complement each other for a seamless and durable repair.
Image: A banner featuring the Walker logo and the phrase 'Better Together', alongside various exhaust system components like gaskets, bolts, springs, and clamps.
Image: A collection of Walker exhaust clamps and various gasket types, highlighting complementary parts for a complete exhaust repair.
Maintenance
Exhaust gaskets are wear items and do not typically require routine maintenance beyond initial proper installation. However, periodic inspection of your vehicle's exhaust system is recommended to identify any signs of wear, damage, or leaks. Look for:
- Audible exhaust leaks (hissing or tapping sounds).
- Soot or carbon deposits around the gasket area, indicating a leak.
- Corrosion or physical damage to the gasket or surrounding pipes.
If any issues are detected, prompt replacement of the gasket and any other affected components is advised to maintain exhaust system efficiency and prevent further damage.
Troubleshooting
Most issues related to exhaust gaskets stem from improper installation or material degradation over time. Common problems and their potential solutions include:
- Exhaust Leak: If you hear a loud exhaust noise or detect exhaust fumes, the gasket may be leaking. This can be caused by improper tightening, damaged mating surfaces, or a worn-out gasket. Re-tighten bolts to specification, inspect surfaces for damage, or replace the gasket.
- Vibration/Rattling: While less common for gaskets themselves, loose exhaust components due to a failed gasket can lead to vibrations. Ensure all connections are secure.
- Check Engine Light: In some cases, a significant exhaust leak can affect oxygen sensor readings, leading to a Check Engine Light. Address the leak promptly.
If troubleshooting steps do not resolve the issue, it is recommended to consult a qualified automotive technician.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Walker |
| Model | 31400 (Exhaust Pipe Flange Gasket) |
| Shape | Round |
| Item Weight | 1.06 ounces |
| Product Dimensions | 7.5 x 2.5 x 2.5 inches |
| Country of Origin | India |
| UPC | 086387314008 |
Warranty Information
Specific warranty details for the Walker Exhaust 31400 Exhaust Pipe Flange Gasket are typically provided at the point of purchase or on the manufacturer's official website. Generally, Walker products are backed by a limited warranty against defects in materials and workmanship. Please retain your proof of purchase for any warranty claims. For the most accurate and up-to-date warranty information, refer to the documentation included with your product or visit the official Walker Exhaust website.
Support
For technical assistance, installation questions, or product inquiries regarding your Walker Exhaust 31400 Exhaust Pipe Flange Gasket, please contact Walker customer support. You can typically find contact information (phone number, email, or online contact form) on the official Walker Exhaust website. When contacting support, please have your product model number (31400) and any relevant vehicle information readily available.
