Introduction
This instruction manual provides essential information for the proper installation and maintenance of the SKF Seal 16924. This product is an aftermarket replacement part designed to meet the specifications for compatible Honda vehicles manufactured between 1991 and 1997. Adhering to these instructions will help ensure optimal performance and longevity of the seal.
Product Overview
Figure 1: The SKF 16924 seal, featuring a durable metallic outer casing and a flexible black rubber sealing element designed to prevent fluid leakage and protect bearings from contaminants.
The SKF Seal 16924 is a critical component designed to prevent the ingress of contaminants (such as dirt, dust, and moisture) and the egress of lubricants from mechanical assemblies. Its primary function is to maintain a clean and lubricated environment for bearings and other moving parts, thereby extending their service life and ensuring reliable operation.
Installation Guidelines
Proper installation is crucial for the effective performance of the SKF Seal 16924. It is recommended that installation be performed by a qualified technician using appropriate tools and safety procedures. Refer to your vehicle's specific service manual for detailed instructions regarding the removal of old components and preparation of the installation site.
- Preparation: Ensure the mating surfaces are clean, dry, and free from burrs, nicks, or corrosion. Any surface imperfections can compromise the seal's integrity.
- Lubrication: Lightly lubricate the sealing lip of the new SKF seal with the same lubricant used in the application (e.g., grease or oil). This aids in installation and prevents initial dry running.
- Alignment: Carefully align the seal with the bore. Ensure it is square to the housing to prevent cocking during installation.
- Pressing: Use a seal driver or a suitable press tool that contacts the outer metal casing of the seal. Apply even pressure to press the seal into the bore until it is fully seated. Avoid striking the seal directly with a hammer, as this can deform the seal and lead to premature failure.
- Inspection: After installation, visually inspect the seal to ensure it is seated correctly and that the sealing lip is not damaged or inverted.
Maintenance and Inspection
Seals are wear components and require periodic inspection. The lifespan of a seal depends on operating conditions, environment, and proper installation. Regular checks can help identify potential issues before they lead to significant damage.
- Visual Inspection: Periodically inspect the area around the seal for signs of lubricant leakage or ingress of contaminants.
- Replacement: Replace the seal if any signs of wear, cracking, hardening, or damage are observed. It is generally recommended to replace seals whenever associated components (e.g., bearings) are serviced or replaced.
Troubleshooting Common Issues
If issues arise after seal installation, consider the following common causes:
- Leakage: This can be caused by improper installation (e.g., cocked seal, damaged lip), a worn shaft, excessive shaft runout, or incorrect seal selection for the application.
- Premature Wear: Often due to abrasive contaminants, insufficient lubrication, excessive temperature, or improper shaft finish.
- Seal Damage During Installation: Can occur if incorrect tools are used, or if the seal is forced over sharp edges without protection.
If persistent issues occur, consult a qualified automotive technician.
Specifications
| Attribute | Detail |
|---|---|
| Brand | SKF |
| Model Number | 16924 |
| Item Weight | 0.64 ounces |
| Product Dimensions | 3.13 x 3.13 x 0.63 inches |
| Manufacturer Part Number | 16924 |
| Exterior | Machined |
| Item Package Quantity | 1 |
| Product Type | AUTO PART |
| Compatibility | Honda 1991-1997 (Verify specific application with vehicle service manual) |
Warranty Information
Specific warranty details for the SKF Seal 16924 should be obtained directly from the manufacturer, SKF, or the authorized seller from whom the product was purchased. Please retain your proof of purchase for any warranty claims.
Support
For technical assistance or further inquiries regarding the SKF Seal 16924, please contact SKF customer support through their official website or consult a professional automotive service center.
