Introduction
The Fiskars 28-inch Bypass Loppers are designed for efficient and clean cutting of live, green growth up to 1.5 inches in diameter. Featuring durable steel blades with a low-friction coating and shock-absorbing handles, these loppers provide comfort and control for various tree trimming and gardening tasks. This manual provides essential information for safe operation, maintenance, and optimal performance of your loppers.
Image: Fiskars 28-inch Bypass Loppers, showcasing their overall design.
Safety Information
- Always wear appropriate safety gear, including gloves and eye protection, when operating loppers.
- Keep hands and body clear of the blades during operation.
- Do not attempt to cut branches exceeding the specified maximum cutting capacity (1.5 inches).
- Ensure a stable footing before making any cuts.
- Keep loppers out of reach of children.
- Store loppers with blades closed and secured in a dry place.
Setup
Your Fiskars 28-inch Bypass Loppers come pre-assembled and ready for use. Before first use and prior to each use, perform the following checks:
- Inspect Blades: Ensure blades are clean, sharp, and free from damage or excessive wear.
- Check Handles: Verify that the handles are securely attached and the grips are intact.
- Test Action: Open and close the loppers a few times to ensure smooth operation and proper alignment of the blades.
Operating Instructions
The Fiskars 28-inch Bypass Loppers are designed for cutting live, green branches. Follow these steps for effective and safe pruning:
- Positioning: Identify the branch to be cut. Position the loppers so that the branch is as deep as possible into the jaws of the blades, close to the pivot point. This maximizes leverage and cutting efficiency.
- Cutting Technique: Apply steady, firm pressure to the handles, closing the blades through the branch. The bypass action ensures a clean cut, which is beneficial for plant health.
- Maximum Capacity: These loppers are designed to cut branches up to 1.5 inches in diameter. Attempting to cut thicker branches may damage the tool or result in an incomplete cut.
- Leverage: The 28-inch handles provide extended reach and increased leverage, reducing the effort required for cutting. Utilize the full length of the handles for optimal power.
Image: Close-up of Fiskars loppers cutting a branch, demonstrating the 1.5-inch cutting capacity.
Image: Fiskars loppers in use, highlighting the low-friction coating for smooth cuts.
Official Product Videos
Video: Fiskars Loppers - Clean Cuts, No Effort. This video demonstrates the loppers' ability to make clean cuts with minimal effort.
Video: Fiskars PowerGear2 Loppers - effortless cutting power. This video highlights the PowerGear2 mechanism for enhanced cutting power.
Video: Fiskars Loppers (for Tree Trimming) Review. A review demonstrating the loppers' performance in tree trimming.
Video: These loppers work great. A demonstration of the loppers' effectiveness in various cutting tasks.
Video: Loppers Unboxing Closer Look. An unboxing and close-up view of the loppers' features.
Video: Fiskars Loppers Reviews & Lifetime Warranty Experience. A review discussing the loppers and the lifetime warranty.
Video: Trims bushes easily. A short video demonstrating the ease of trimming bushes with the loppers.
Video: Two large Fiskars pruners compared. Which one works better? A comparison video of different Fiskars pruning tools.
Maintenance
Proper maintenance ensures the longevity and performance of your Fiskars loppers:
- Cleaning: After each use, clean the blades to remove sap, dirt, and debris. A damp cloth and mild soap can be used. For stubborn sap, a specialized tool cleaner or rubbing alcohol may be effective.
- Lubrication: Periodically apply a light coat of oil to the pivot point and blades to ensure smooth operation and prevent rust.
- Sharpening: The fully-hardened steel blades are designed to stay sharp. If they become dull over time, they can be sharpened using a suitable sharpening tool for bypass blades. Refer to Fiskars' official resources for detailed sharpening instructions.
- Storage: Store loppers in a dry, protected area with the blades closed and secured.
Image: Close-up of the lopper blade, emphasizing its sharpness and non-stick coating.
Troubleshooting
- Difficulty Cutting: If the loppers are hard to close or not cutting cleanly, the blades may be dull or gummed up with sap. Clean and sharpen the blades as described in the Maintenance section.
- Blades Sticking: Sap and resin from plants can cause blades to stick. Regular cleaning with a sap remover or rubbing alcohol will prevent this.
- Excessive Play in Pivot: If the pivot point feels loose, check if the bolt is securely tightened. Do not overtighten, as this can hinder smooth operation.
Specifications
| Feature | Detail |
|---|---|
| Brand | Fiskars |
| Model Number | 391461-1003 |
| Style | Bypass Lopper 28" |
| Blade Material | Stainless Steel |
| Handle Material | Alloy Steel |
| Cutting Capacity | Up to 1.5 inches diameter |
| Item Weight | 2.9 Pounds |
| Product Dimensions | 27.43"L x 9.95"W |
Image: Fiskars loppers with key dimensions and weight indicated.
Image: Diagram illustrating key features: low-friction coating, shock-absorbing bumpers, and hardened steel blade.
Warranty & Support
Fiskars stands behind the quality of its products. These loppers are backed by a Full Lifetime Warranty. Fiskars tools are designed for longevity and guaranteed to maintain exceptional performance season after season.
For detailed information regarding the warranty, claims, or product support, please refer to the official Fiskars website or contact their customer service directly. Keep your purchase receipt as proof of purchase may be required for warranty claims.
Image: Official Fiskars Lifetime Warranty badge.