Schneider Industries Micro Vacuum Attachment 7 Piece Kit Instruction Manual

Introduction

The Schneider Industries Micro Vacuum Attachment 7 Piece Kit is designed for precise cleaning of delicate appliances and hard-to-reach areas. This versatile kit allows users to effectively clean items such as computers, printers, car interiors, and home workshop benches, where standard vacuum attachments may be too large or too powerful.

The kit includes specialized tools to manage suction and access confined spaces, ensuring thorough cleaning without damaging sensitive components.

Package Contents

Image: The complete 7-piece micro vacuum attachment kit, including the flexible hose, adapter, extension pipes, and various brushes and crevice tool.

The 7-piece kit includes the following components:

• One Adaptor: Connects the micro kit to your vacuum cleaner's main hose.
• Pipe Connector with Adjustable Suction Fitting: Features an airflow control valve to regulate suction.
• Flexible Tube: Approximately 36 inches (91 cm) in length, allowing for extended reach and maneuverability.
• Curved 'Elbow' Extension Pipe: For reaching around corners and into angled spaces.
• Straight Extension Pipe: For extending reach into deeper areas.
• Wide Oval Brush: Suitable for dusting larger delicate surfaces.
• Narrow Round Brush: Ideal for smaller, intricate dusting tasks.
• Thin (Chamfered) Crevice Tool: Designed for cleaning very narrow gaps and tight crevices.

Compatibility

This micro vacuum attachment kit is designed for broad compatibility with most standard vacuum cleaners. Please review the following compatibility details:

• Fits: All vacuums that accept standard 1 1/4 inch (32 mm) inside diameter friction-fit attachments.
• Includes: A 35 mm (1 1/4 inch) adapter for European-sized friction-fit wands.
• Does NOT Fit: Clip-mounted wands, such as those found on Dyson and Shark vacuum cleaners.
• Does NOT Fit: Handheld vacuums that do not have a hose or wand connection point.

Setup Instructions

Follow these steps to assemble and prepare your micro vacuum attachment kit for use:

1. Connect the Main Adapter: Take the largest adapter piece and firmly attach it to the end of your vacuum cleaner's main hose or wand. Ensure a snug, friction-fit connection.
2. Attach the Flexible Tube: Connect one end of the flexible tube to the smaller opening of the main adapter. This connection should also be secure.
3. Select and Attach Tools: Choose the appropriate extension pipe (curved or straight) or directly attach a brush or crevice tool to the open end of the flexible tube. You can combine extension pipes for longer reach.

Image: An example of the micro vacuum kit assembled, demonstrating the connection of the flexible tube to an extension and a crevice tool.

The pipe connector includes an adjustable suction fitting. This component has small holes that are an intentional design feature to prevent excessive suction, which could damage delicate items or cause your vacuum cleaner to overheat. This valve cannot be fully closed.

Operating Instructions

This kit is ideal for cleaning sensitive and hard-to-reach areas. Always ensure your vacuum cleaner is in good working order before use.

• General Use: Use the assembled micro vacuum kit to clean dust and debris from electronic devices (e.g., keyboards, computer vents, TV screens), car dashboards, intricate models, and small workshop tools.
• Airflow Control: The adapter features an airflow control valve. This valve is designed with small openings to prevent excessive suction, which is crucial when cleaning delicate items like circuit boards or jewelry. It also helps prevent your vacuum cleaner from overheating. Adjust the valve as needed to achieve the desired suction level.
• Using Attachments:
  • Brushes (Wide Oval & Narrow Round): Use these for gentle dusting of surfaces, vents, and intricate parts.
  • Crevice Tool: Perfect for reaching into tight spaces, between keys on a keyboard, or along seams in car interiors.
  • Extension Pipes: Utilize the straight and curved pipes to extend your reach into deeper or angled areas.
• Delicate Surfaces: When cleaning very delicate surfaces, consider using the brush attachments to minimize direct contact with the vacuum's suction.

Image: A detailed view of the individual attachments, including the wide oval brush, narrow round brush, thin crevice tool, curved extension pipe, and straight extension pipe, with their approximate dimensions.

Maintenance

Proper maintenance will ensure the longevity and effectiveness of your micro vacuum attachment kit:

• Cleaning Attachments: After use, detach all components. Wipe down plastic parts with a damp cloth to remove dust and debris. For brushes, gently remove any trapped particles.
• Drying: Ensure all components are completely dry before reassembling or storing.
• Storage: Store the kit in a clean, dry place away from direct sunlight and extreme temperatures. Keeping the components together in a designated bag or container will prevent loss and damage.

Troubleshooting

If you encounter issues not listed here, please refer to the support section or contact Schneider Electric customer service.

Specifications

Warranty and Support

For any questions regarding the Schneider Industries Micro Vacuum Attachment 7 Piece Kit, including product functionality, compatibility, or troubleshooting beyond the scope of this manual, please contact Schneider Electric customer support.

Please refer to your purchase documentation or the official Schneider Electric website for specific warranty information and contact details.