Introduction
This manual provides comprehensive instructions for the installation, usage, and maintenance of your National Hardware N330-761 V160 Coat/Hat Hooks. Please read these instructions carefully before installation and retain this manual for future reference.
Product Overview
The National Hardware N330-761 V160 is a durable double coat/hat hook designed for wall or door mounting. It features an oil rubbed bronze finish and a decorative ball tip design. Constructed from zinc die-cast, it offers strength and reliability for various applications.
- Material: Zinc die-cast for enhanced durability.
- Finish: Oil Rubbed Bronze for a classic aesthetic.
- Design: Double hook with decorative ball tips.
- Projection: 3 inches from the wall when installed.
- Weight Capacity: Safe working load of 35 pounds.
- Versatility: Suitable for use in bedrooms, bathrooms, closets, and other areas.
Image 1: Front view of the National Hardware N330-761 V160 Oil Rubbed Bronze Coat/Hat Hook. This image displays the double hook design and the oil rubbed bronze finish.
Safety Information
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Always ensure the hook is securely mounted to a stable surface capable of supporting the intended weight. Do not exceed the maximum weight capacity of 35 pounds.
Package Contents
Each package contains:
- 2 x National Hardware N330-761 V160 Coat/Hat Hooks in Oil Rubbed Bronze
- Fasteners for installation
Setup and Installation
Follow these steps for proper installation of your coat/hat hooks:
- Select Location: Choose a suitable location on a wall or door. Ensure the surface is structurally sound and can support the hook and its intended load.
- Mark Mounting Points: Hold the hook against the desired surface and use a pencil to mark the locations for the mounting screws through the pre-drilled holes on the hook's base.
- Prepare Surface: Depending on your wall material (e.g., drywall, wood stud), you may need to pre-drill pilot holes. For drywall, use appropriate wall anchors (not always included, but recommended for heavier loads). For wood studs, pre-drilling a smaller pilot hole can prevent wood splitting.
- Attach Hook: Align the hook with the marked or pre-drilled holes. Insert the provided fasteners (screws) through the hook's holes and secure them firmly into the wall or door using a screwdriver. Do not overtighten.
- Test Stability: Gently pull on the installed hook to ensure it is securely fastened and does not wobble.
The hook will project approximately 3 inches from the wall once installed.
Usage
These hooks are designed to hold coats, hats, towels, bags, or other garments and accessories. Utilize both the upper and lower hooks as needed. Ensure the total weight placed on the hook does not exceed the safe working load of 35 pounds.
Maintenance
To maintain the appearance and functionality of your National Hardware hooks:
- Cleaning: Wipe with a soft, damp cloth. Avoid abrasive cleaners, solvents, or polishes that may damage the oil rubbed bronze finish.
- Inspection: Periodically check the mounting screws to ensure they remain tight. Retighten if necessary to prevent loosening over time.
Specifications
| Feature | Detail |
|---|---|
| Brand | National Hardware |
| Model Number | N330-761 |
| Color | Oil Rubbed Bronze |
| Material | Zinc Die-Cast |
| Finish Type | Oil Rubbed |
| Mounting Type | Wall Mount |
| Number of Hooks | 2 (Double Hook) |
| Projection from Wall | 3 inches |
| Maximum Weight Capacity | 35 Pounds |
| Item Dimensions (L x W x H) | 22.1 x 11.5 x 6.3 inches (Packaging dimensions, actual hook is smaller) |
| Item Weight | 0.01 Ounces (Likely product weight, not shipping) |
| UPC | 038613330764 |
Warranty and Support
Warranty: This product is covered by a LifeSpan Limited Lifetime Warranty from National Hardware. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official National Hardware website.
Customer Support: For assistance with installation, troubleshooting, or warranty claims, please contact National Hardware customer service. You can find contact information and additional resources on the National Hardware Store page on Amazon or their official website.