Introduction
The Toro Flood Bubbler Riser Full Circle with Adjustable Flow 53692 is designed for efficient, slow, and deep watering of trees, shrubs, and vegetable gardens. This bubbler provides a full circle watering pattern and allows for adjustable flow rates to suit specific plant needs, ensuring water is delivered precisely where it is required.
Safety Information
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Product Overview
The Toro Flood Bubbler 53692 features a full circle pattern, ideal for targeted watering. Its adjustable flow mechanism allows for precise control over water delivery, from completely off to 2 gallons per minute (GPM), covering a radius of 0 to 2 feet. This design ensures water penetrates deeply into the soil, promoting healthy root development.
Image: Product label for Toro Flood Bubbler Model 53692, highlighting its 360-degree full circle pattern and adjustable flow rate of 0-2 GPM for slow watering of trees and shrubs.
Setup and Installation
Follow these steps to properly install your Toro Flood Bubbler:
- Prepare the Riser: Ensure you have a 1/2-inch NPT (National Pipe Taper) riser installed in the desired watering location. This bubbler is designed for non-traffic areas.
- Attach the Bubbler: Carefully thread the Toro Flood Bubbler onto the 1/2-inch NPT riser. Hand-tighten only to prevent damage to the threads. Do not overtighten.
- Positioning: Ensure the bubbler is positioned upright and stable to achieve the intended watering pattern.
Operating Instructions
Adjusting the water flow of your bubbler is simple:
- Turn on Water Supply: Activate the water supply to the irrigation zone where the bubbler is installed.
- Adjust Flow Rate: The bubbler features an adjustable cap. Rotate the cap clockwise to reduce flow or turn off, and counter-clockwise to increase flow up to 2 GPM.
- Observe Watering Pattern: Monitor the watering pattern to ensure it covers the desired area (0-2 foot radius) and provides slow, deep watering without runoff. Adjust as needed for optimal performance.
Image: A Toro Flood Bubbler 53692 in operation, emitting water in a full circle pattern over a mulched garden bed, demonstrating its slow, deep watering capability.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your bubbler:
- Regular Inspection: Periodically check the bubbler for any obstructions, cracks, or leaks.
- Cleaning: If the flow becomes restricted, gently remove the cap and clean any debris from the internal components. Use a soft brush or rinse with water.
- Winterization: In freezing climates, ensure all irrigation lines, including bubblers, are properly drained or blown out to prevent freeze damage. Consult your irrigation system's manual for specific winterization procedures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or very low flow | Clogged bubbler; Water supply off; Adjustment cap closed | Clean bubbler; Check water supply valve; Rotate adjustment cap counter-clockwise to open |
| Water sprays unevenly | Debris in nozzle; Damaged bubbler head | Clean nozzle thoroughly; Replace bubbler if physical damage is present |
| Leak at riser connection | Loose connection; Damaged threads; Missing or worn thread sealant | Tighten connection (hand-tight); Apply PTFE tape or pipe sealant to threads; Replace bubbler or riser if threads are severely damaged |
Specifications
- Model Number: 53692
- Brand: Toro
- Watering Pattern: Full Circle (360°)
- Adjustable Flow Rate: 0 to 2 GPM (Gallons Per Minute)
- Adjustable Radius: 0 to 2 feet
- Inlet Connection: 1/2-inch NPT (National Pipe Taper)
- Material: Plastic
- Color: Black
- Item Dimensions (L x W x H): 1.5 x 2.5 x 1.5 inches
- Maximum Pressure: 25 psi
Warranty Information
This Toro product comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the documentation included with your purchase or visit the official Toro website. Retain your proof of purchase for warranty claims.
Customer Support
For further assistance, technical support, or to purchase replacement parts, please contact Toro customer service or visit the official Toro website. Always provide your product model number (53692) when seeking support to ensure accurate and timely assistance.