1. Introduction
This manual provides detailed instructions for the safe and effective use of your Medline MDS86100RF Toilet Safety Rail. This product is designed to offer stability and support for individuals requiring assistance when sitting down or standing up from a toilet. Please read all instructions carefully before assembly and use.
Image 1.1: Medline Toilet Safety Rail installed on a standard toilet.
Safety Information
- Maximum Weight Capacity: Do not exceed the maximum weight capacity of 250 lbs (113 kg).
- Ensure all components are securely fastened before each use.
- Do not use if any parts are damaged or missing. Contact Medline customer support for replacement parts.
- This product is intended for use as a toilet assist device only. Do not use for purposes other than its intended use.
- Consult a healthcare professional if you have questions regarding the suitability of this product for your specific needs.
2. Components
Verify that all the following components are present before beginning assembly:
- Toilet Safety Rail Frame (Aluminum)
- Padded Armrests (pre-attached)
- Adjustable Mounting Bracket
- Mounting Knobs (2)
- Height Adjustment Pins (pre-installed)
- Slip-Resistant Rubber Tips (pre-installed on legs)
Image 2.1: Detail of the comfortable foam armrests.
3. Setup and Installation
The Medline Toilet Safety Rail is designed for easy installation onto most standard toilets. No special tools are required.
- Prepare the Toilet: Lift the toilet seat and lid. Locate the two bolts that secure the toilet seat to the toilet bowl.
- Position the Bracket: Place the adjustable mounting bracket of the safety rail over the toilet seat bolts. Ensure the bracket is centered and flush against the toilet bowl.
- Secure the Rail: Re-attach the toilet seat and lid, aligning the holes with the bracket and toilet bowl. Use the provided mounting knobs to tighten the bracket securely to the toilet seat bolts. Hand-tighten only; do not overtighten.
- Adjust Width: The width between the arms can be adjusted. Loosen the knobs on the horizontal bar of the frame, slide the arms to the desired width (between 15-18 inches), and re-tighten the knobs.
- Verify Stability: Gently test the rail by applying downward pressure to ensure it is stable and does not wobble. If unstable, re-check all connections and tighten the mounting knobs.
Image 3.1: The adjustable mounting bracket secures the rail to the toilet seat bolts.
Image 3.2: The bracket is designed to fit under most standard toilet seats.
4. Operating Instructions and Adjustments
Using the Safety Rail
The safety rail provides a secure grip for assistance. When sitting down, slowly lower yourself while holding onto the armrests. When standing up, push down on the armrests to assist in rising.
Height Adjustment
The height of the armrests can be adjusted to suit individual user needs, ranging from 27.5 inches to 31.5 inches from the floor.
- Locate the spring-loaded adjustment pins on each leg of the safety rail.
- Press the pin inward and slide the leg up or down to the desired height. Ensure the pin fully engages in one of the adjustment holes.
- Repeat for the other leg, ensuring both sides are adjusted to the same height for stability.
Image 4.1: The spring-loaded pin allows for easy height adjustment.
Image 4.2: Ensure the pin is fully engaged in the desired height setting.
5. Maintenance
Cleaning
The Medline Toilet Safety Rail features a durable aluminum frame with a scratch-resistant powder coating, making it easy to clean.
- Wipe down the frame and armrests regularly with a damp cloth and mild soap.
- Avoid using abrasive cleaners or solvents, as these may damage the finish.
- Ensure the rail is dry before next use.
Inspection
Periodically inspect the safety rail for any signs of wear, damage, or loose components.
- Check the mounting bracket and knobs for tightness.
- Inspect the rubber tips on the legs for wear; replace if damaged to maintain slip resistance.
- Ensure height adjustment pins engage properly.
6. Troubleshooting
- Issue: The safety rail feels wobbly or unstable.
- Solution:
- Ensure the mounting knobs securing the bracket to the toilet seat bolts are fully tightened.
- Verify that both legs are adjusted to the same height and the adjustment pins are fully engaged.
- Check that the width adjustment knobs on the horizontal bar are securely tightened.
- Issue: The rail does not fit my toilet.
- Solution:
- The rail is designed to fit most standard toilets. Ensure the adjustable mounting bracket is correctly positioned over the toilet seat bolts.
- Confirm that the width between the arms is adjusted appropriately for your toilet and user comfort.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | MDS86100RF |
| Brand | Medline |
| Material | Aluminum |
| Color | Silver/Gray |
| Minimum Height | 27.5 Inches |
| Maximum Height | 31.5 Inches |
| Width Between Arms | 15-18 Inches (Adjustable) |
| Handle Width | 19-22 Inches (Adjustable) |
| Maximum Weight Capacity | 250 Pounds |
| Product Dimensions (L x W x H) | 27.5-31.5"L x 19-22"W x 27.5-31.5"H |
| Item Weight | 4.39 pounds |
| UPC | 080196755403 |
Image 7.1: Overview of product dimensions and weight capacity.
8. Warranty Information
Medline products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Medline website. Keep your purchase receipt as proof of purchase.
9. Customer Support
If you have any questions, require assistance, or need to order replacement parts, please contact Medline customer support:
- Website: Visit the official Medline website for support resources.
- Phone: Refer to the contact information provided on the product packaging or Medline's website.
