Step2 Tag-Along Trailer Plus Instruction Manual

Introduction

The Step2 Tag-Along Trailer Plus is designed as a versatile accessory to enhance your Step2 Wagon for Two Plus. It provides additional storage capacity for items such as diaper bags, snacks, toys, and other essentials, making outings more convenient. This manual provides essential information for the safe assembly, operation, and maintenance of your trailer.

Image: The Step2 Tag-Along Trailer Plus, shown in Willow Green, ready for attachment to a compatible wagon.

Safety Information

• Adult Supervision Required: Always ensure an adult supervises children when the trailer is in use.
• Weight Limit: The maximum weight capacity for the trailer is 40 pounds (18 kg). Do not exceed this limit.
• Not for Passenger Use: This trailer is designed for carrying cargo only. It is not intended for transporting children or pets.
• Pre-Use Inspection: Before each use, inspect the trailer and its connection to the wagon for any loose parts, damage, or wear. Ensure all fasteners are secure.
• Terrain: Use the trailer on flat, stable surfaces. Avoid steep inclines, rough terrain, or areas with obstacles that could cause the trailer to tip or detach.
• Cornering: Be aware that the trailer may affect the turning radius and maneuverability of the wagon. Exercise caution when turning, especially in tight spaces.

Package Contents

Please verify that all components are present before beginning assembly. Refer to the packaging for a complete list of parts. If any parts are missing or damaged, contact Step2 customer service immediately.

• Trailer body
• Wheels (4)
• Axles (2)
• Hitch assembly
• Fasteners and hardware (e.g., axle bushings, screws, lock nuts)

Assembly Instructions

Assembly of the Step2 Tag-Along Trailer Plus is designed to be straightforward and typically requires no tools for attachment or detachment to the main wagon.

1. Attach Wheels: Securely attach the four wheels to the trailer body using the provided axles and axle bushings. Ensure wheels spin freely.
2. Install Hitch: Connect the hitch assembly to the front of the trailer body using the designated screw and lock nut. Ensure the hitch is firmly attached and allows for proper articulation.
3. Final Check: Verify all connections are secure before first use.

Note: Some users have reported missing hardware upon delivery. If you encounter this, please contact Step2 customer service for replacement parts. Alternatively, standard hardware can often be sourced from a local hardware store if immediate use is required.

Operating Instructions

Attaching the Trailer to a Step2 Wagon for Two Plus

1. Position the trailer directly behind the Step2 Wagon for Two Plus.
2. Align the trailer's hitch with the designated attachment point on the rear of the wagon.
3. Push the hitch firmly into the wagon's receiver until it clicks or is securely seated. Ensure the connection is snug to prevent accidental detachment during use.

Detaching the Trailer

1. Ensure the wagon and trailer are on a flat, stable surface.
2. Grasp the hitch firmly and pull it away from the wagon's receiver. Some force may be required to disengage the connection.

Loading the Trailer

• Distribute weight evenly within the trailer to maintain stability.
• Secure loose items to prevent them from falling out during movement.
• Do not exceed the 40-pound weight limit.

Maintenance

• Cleaning: The trailer can be easily cleaned with mild soap and water. Rinse thoroughly and allow to air dry. Avoid abrasive cleaners.
• Storage: Store the trailer in a dry, protected area when not in use to prevent weather damage and prolong its lifespan.
• Wheel Inspection: Periodically check the wheels and axles for debris, wear, or damage. Ensure they rotate smoothly.

Troubleshooting

• Trailer Detaches Frequently: Ensure the hitch is fully engaged with the wagon's receiver. Inspect the hitch and receiver for wear or damage. If the connection remains loose, contact customer service.
• Difficulty Attaching/Detaching: Ensure the hitch and receiver are clean and free of obstructions. Applying slight pressure or wiggling the hitch may help. If persistent, check for misalignment or damage.
• Missing Parts During Assembly: Refer to the 'Package Contents' section. Contact Step2 customer service for replacement parts.
• Poor Maneuverability: The trailer will naturally affect the wagon's turning radius. Reduce speed and take wider turns. Ensure the trailer is not overloaded.

Specifications

Warranty and Support

The Step2 Tag-Along Trailer Plus comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, missing parts, or technical support, please contact Step2 customer service directly. Refer to the product packaging or the official Step2 website for current contact information.