Introduction
The Flavia J10NBK Fusion Drinks Station is designed to provide a wide variety of freshly brewed beverages with ease. This single-serve system utilizes Flavia Filterpacks to deliver over 30 different drinks, including coffee, cappuccino, tea, chococcinos, and well-being drinks. Its revolutionary brew-by-pack technology ensures that each drink is untainted by previous brews, offering a clean and consistent taste every time.
Key Features:
- Brews over 30 fresh, sealed individual drinks.
- Revolutionary technology prevents flavor cross-contamination between brews.
- Quick and easy operation.
- No cleaning required between different drink preparations.
- Large capacity removable water tank for less frequent refilling.
- Adjustable height dispenser accommodates various cup sizes, including travel mugs.
- Includes an activated-charcoal water filter for purified water.
Setup Guide
1. Unpacking
Carefully remove the Flavia J10NBK Fusion Drinks Station from its packaging. Ensure all components are present and undamaged. Place the unit on a stable, level surface near a power outlet.
2. Water Tank Installation and Filling
Locate the removable water tank at the back of the unit. Lift it out, fill it with fresh, cold water, and ensure the activated-charcoal water filter is properly seated within the tank. Reinsert the filled water tank securely into the unit.
Image: The Flavia Fusion Drinks Station, highlighting the removable water tank on the side, ready for filling.
3. Power Connection
Plug the power cord into a grounded electrical outlet. The unit will power on and may begin a brief initialization process.
4. First Use / Priming
Before brewing your first drink, it is recommended to run a cycle with just water to prime the system. Place an empty cup under the dispenser, close the brewer chamber, and press the brew button. Discard the hot water. This cleans the internal components and prepares the machine for use.
Operating Instructions
How to Brew a Drink:
- Step 1: Open the Brewer Chamber Door
Gently lift the handle to open the brewer chamber door at the top of the unit.
Image: A hand demonstrating how to open the brewer chamber door on the Flavia Fusion Drinks Station.
- Step 2: Insert the Filterpack
Select your desired Flavia Filterpack. Insert the Filterpack into the designated slot within the brewer chamber. Ensure it is seated correctly.
Image: A hand inserting a Flavia Filterpack into the open brewer chamber of the machine.
- Step 3: Close the Door and Press the Button
Close the brewer chamber door firmly. Place your cup under the dispenser. Press the brew button to start the brewing process. The machine will automatically dispense your drink.
Image: A hand pressing the brew button on the Flavia Fusion Drinks Station to initiate brewing.
Adjusting Cup Height
The Flavia J10NBK features an adjustable height dispenser. To accommodate different cup sizes, including tall travel mugs, simply slide the drip tray and dispenser up or down to match your cup's height. This minimizes splashing and ensures optimal brewing.
Image: The Flavia Fusion Drinks Station in black, showcasing its design and the area where a cup is placed, implying adjustable height for various cup sizes.
Maintenance
Daily Cleaning
- After each use, wipe down the exterior of the machine with a damp cloth.
- Empty and rinse the drip tray regularly to prevent overflow and maintain hygiene.
- The brew-by-pack technology minimizes internal cleaning needs between drinks, as each Filterpack contains its own filter.
Water Filter Maintenance
The activated-charcoal water filter helps purify the water for better-tasting drinks. While the manual does not specify a replacement schedule, it is generally recommended to replace activated charcoal filters every 2-3 months, or as indicated by the filter manufacturer, to ensure optimal water quality.
Descaling
Over time, mineral deposits can build up inside the machine, affecting performance. It is recommended to descale your Flavia J10NBK Fusion Drinks Station periodically, typically every 3-6 months depending on water hardness. Refer to the manufacturer's descaling instructions or use a descaling solution suitable for coffee machines.
Troubleshooting
If you encounter issues with your Flavia J10NBK Fusion Drinks Station, please consult the following common problems and solutions:
- Machine Not Turning On: Ensure the power cord is securely plugged into both the machine and a working electrical outlet. Check if the outlet has power.
- No Water Dispensing: Verify that the water tank is properly seated and filled with water. The machine will not brew if the water level is too low.
- Drink Dispensing Only Half a Cup: This can indicate a potential issue with water flow or internal components. Ensure the water tank is full and the filter is not clogged. If the problem persists, contact customer support.
- Drink Not Hot Enough: Allow the machine sufficient time to heat up after turning it on. Ensure the brewer chamber door is fully closed during brewing.
- Leaking: Check that the water tank is correctly installed and not cracked. Ensure the drip tray is properly positioned. If leaking continues, discontinue use and contact support.
Product Specifications
| Product Dimensions | 14.2 x 10.8 x 15.8 inches |
| Item Weight | 13 pounds |
| Manufacturer | FLAVIA |
| Model Number | J10NBK |
| Date First Available | October 21, 2005 |
Warranty and Support
Warranty Information
The Flavia J10NBK Fusion Drinks Station comes with a one-year limited warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please refer to the contact information provided with your product packaging or visit the official Flavia website. When contacting support, please have your model number (J10NBK) and purchase date readily available.
