1. Product Overview
The Permatex 81158 Black Silicone Adhesive Sealant is a versatile, general-purpose RTV (Room Temperature Vulcanizing) sealant designed for both indoor and outdoor applications. It effectively bonds, repairs, seals, mends, and secures various materials, providing a durable and flexible seal.
Key Features:
- Professional Formula: Sensor-safe, general-purpose black RTV sealant.
- Multi-purpose: Seals, bonds, repairs, mends, and secures glass, metal, plastics, fabric, vinyl, weather stripping, and vinyl tops.
- Weather Resistant: Waterproof and flexible; resists water, weather, vibration, oil, and grease.
- Temperature Range: Effective from -75°F to 450°F (-59°C to 232°C).
- Electrical Protection: Can be used to protect and repair electrical wiring.
This sealant is ideal for applications such as door frames, electrical connections, seams and roofs, vinyl tops, and weather stripping. It is not recommended for engine gasket applications.
2. Safety Information
WARNING: Direct contact with uncured sealant may irritate eyes and skin. Avoid contact with skin or eyes. Use with adequate ventilation. Read carefully all cautions on the back panel before use. This product may contain chemicals known to cause cancer.
First Aid:
- Eye Contact: Flush with water for 15 minutes. Seek medical attention if irritation persists.
- Skin Contact: Wash thoroughly with soap and water.
- Inhalation: Move to fresh air. If symptoms persist, seek medical attention.
KEEP OUT OF THE REACH OF CHILDREN.
3. Setup and Preparation
- Surface Preparation: Ensure all surfaces to be bonded or sealed are clean, dry, and free from oil, stains, and old adhesive layers. Use a scraper or appropriate cleaning agent if necessary.
- Open the Tube: Unscrew the cap. The tube may have a sealed opening that needs to be punctured.
- Prepare Nozzle: Cut the nozzle to achieve the desired bead size for your application. A smaller cut will produce a finer bead, while a larger cut will produce a thicker bead.
4. Operating (Application)
- Apply Sealant: Apply a continuous and even bead of sealant directly onto one of the joint surfaces. The coating thickness should be appropriate for the gap being filled.
- Allow to Dry: Let the applied sealant stand for 8-12 minutes to allow the surface to begin drying.
- Assemble Parts: While the sealant is still tacky, assemble the parts.
- Fasten Connection: When tightening fasteners, apply uniform and appropriate force. Ensure the sealing surface is not moved during tightening to maintain an effective seal.
5. Curing and Maintenance
- Full Cure Time: Allow the adhesive layer to fully cure for 24 hours before using the vehicle or applying stress to the sealed joint.
- Cleaning Excess Sealant: Excess uncured sealant can be wiped away with a cloth. Once cured, excess sealant can be trimmed with a sharp knife.
- Nozzle Maintenance: To reuse the applicator nozzle, clean any remaining sealant from the nozzle using hot water. Silicone becomes more liquidy with hot water, making it easier to wash out.
6. Specifications
| Attribute | Value |
|---|---|
| Brand | Permatex |
| Specific Uses For Product | Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops, Protects and repairs electrical wiring |
| Material | Silicone |
| Item Form | Tube |
| Special Feature | Sensor-safe |
| Color | Black |
| Item Volume | 3 Fluid Ounces |
| Viscosity | Medium |
| Full Cure Time | 24 Hours |
| Water Resistance Level | Waterproof |
| UPC | 0686226811585 |
| Item model number | 81158 |
7. Warranty and Support
For information regarding product warranty, technical support, or further assistance, please visit the official Permatex website or contact their customer service department. You can also refer to the Permatex Brand Store for additional product information and resources.
