Fellowes Powershred PS-70 Shredder

Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Fellowes Powershred PS-70 Shredder. Please read this manual thoroughly before using the shredder and retain it for future reference.

Figure 1: Fellowes Powershred PS-70 Shredder. This image displays the shredder from a top-down perspective, highlighting the paper entry slot, control panel, and the overall design of the unit.

Safety Instructions

Always follow basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury.

• Keep hands, hair, and loose clothing away from the paper entry slot.
• Keep children and pets away from the shredder.
• Unplug the shredder when not in use or before moving or cleaning.
• Do not operate with a damaged power cord or plug.
• Do not shred metal objects, large paper clips, or hard plastic (other than credit cards).
• Do not spray aerosols or lubricants into the shredder.

Setup

1. Unpacking: Carefully remove the shredder from its packaging. Retain packaging for future transport or storage.
2. Placement: Place the shredder on a flat, stable surface near a power outlet. Ensure adequate space around the unit for ventilation.
3. Wastebasket Installation: The PS-70 features a 7-gallon pull-out wastebasket. Ensure the wastebasket is correctly inserted and fully closed. The shredder will not operate if the wastebasket is ajar due to a safety interlock switch.
4. Power Connection: Plug the power cord into a standard electrical outlet.

Figure 2: Fellowes Powershred PS-70 Shredder with wastebasket. This image shows a side view of the shredder, illustrating the integrated wastebasket design.

Operating Instructions

The Fellowes Powershred PS-70 is designed for efficient shredding of documents, credit cards, and CDs.

• Powering On: Locate the power switch on the shredder head. Set it to the "Auto" position. The shredder is now ready for operation.
• Shredding Paper:
  • Insert up to 14 sheets of paper into the 9-inch paper entry slot. The shredder will automatically start when paper is detected and stop when shredding is complete.
  • The sheet capacity gauge helps prevent paper jams by indicating when the maximum sheet capacity is approached.
  • The PS-70 shreds paper into 7/32-inch strips.
• Shredding Credit Cards/CDs:
  • For credit cards, insert one card at a time into the designated safety slot.
  • For CDs, insert one CD at a time into the designated safety slot.
• Continuous Operation: The shredder is designed for intermittent use. Continuous operation beyond approximately 10-12 minutes will trigger a 20-minute cool-down period to prevent overheating. The shredder will automatically shut off and alert the operator.
• Reverse Function: In case of a minor jam or to clear the cutting mechanism, switch the power to the "Reverse" position.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your shredder.

• Emptying the Wastebasket: When the wastebasket is full, the shredder will stop operating. Pull out the wastebasket, empty its contents, and reinsert it securely.
• Oiling the Shredder: To maintain cutting performance and reduce noise, regularly oil the shredder blades. Apply shredder oil (sold separately) across the paper entry slot, then run a few sheets of paper through the shredder. Perform this after every 30 minutes of accumulated shredding or at least once a month.
• Cleaning: Unplug the shredder before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.

Troubleshooting

Specifications

Warranty and Support

Specific warranty details and customer support contact information are typically provided with your product packaging or can be found on the official Fellowes website. Please refer to these resources for the most accurate and up-to-date information regarding your Fellowes Powershred PS-70 Shredder.

For further assistance, visit the Fellowes official website or contact their customer service department.