Introduction
The MTM SW100-11 Shot Shell/Choke Tube Case is designed for the secure and organized storage and transport of shotgun shells and choke tubes. Constructed from rugged polypropylene, this case offers durability and convenience for hunters and shooting enthusiasts. It features a comfortable handle for easy carrying and a dedicated compartment for choke tubes.
Product Overview
This image displays the MTM SW100-11 Shot Shell/Choke Tube Case in its open position. The main compartment is visible, filled with multiple shotgun shells, demonstrating its capacity. The upper lid features a separate, smaller compartment designed to hold choke tubes and other small accessories, such as wrenches. The case is made of durable green polypropylene, indicating its robust construction suitable for outdoor use.
The case is specifically designed to hold up to 100 rounds of 2-3/4" or 3" 12, 16, or 20 gauge shot shells. Alternatively, it can accommodate 50 rounds of 3-1/2" 12 or 10 gauge shells. The detachable choke tube case can hold up to nine tubes, along with most factory wrenches and choke lube.
Setup
- Unpacking: Carefully remove the MTM SW100-11 case from its packaging. Inspect the case for any signs of damage during transit.
- Opening the Case: Unlatch the front clasps and lift the lid. The lid will reveal the main shell storage area and the integrated choke tube compartment.
- Detaching Choke Tube Case (Optional): The choke tube compartment is detachable. To remove it, gently lift it from its seated position within the main lid. This allows for separate transport or easier access to choke tubes.
Operating Instructions
Loading Shot Shells:
- Ensure the case is clean and free of debris.
- Place shotgun shells upright into the designated compartments within the main storage area. Arrange them neatly to maximize capacity and prevent shifting during transport.
- The case is designed to hold 100 rounds of 2-3/4" or 3" 12, 16, or 20 gauge shells, or 50 rounds of 3-1/2" 12 or 10 gauge shells. Do not overfill.
Storing Choke Tubes and Accessories:
- Open the detachable choke tube case.
- Insert choke tubes into the individual slots. This compartment can hold up to nine choke tubes.
- Utilize the remaining space for small accessories such as choke wrenches or choke lube.
- Close the choke tube case securely before placing it back into the main lid's recess or storing it separately.
Closing and Transporting:
- Ensure all contents are properly seated and the choke tube case (if detached) is either secured back in the lid or stored safely.
- Lower the main lid and firmly press down until the front clasps engage and lock into place.
- Use the integrated handle for comfortable and secure transport.
Maintenance
- Cleaning: Wipe the case exterior and interior with a damp cloth as needed. For stubborn dirt, a mild soap solution can be used. Ensure the case is completely dry before storing ammunition or accessories.
- Storage: Store the case in a cool, dry place away from direct sunlight and extreme temperatures to prolong its lifespan.
- Inspection: Periodically inspect the latches, hinges, and handle for any signs of wear or damage. Replace the case if significant damage is observed to ensure secure storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lid does not close securely. | Contents are overfilled or misaligned. Debris in latch mechanism. | Ensure shells and choke tubes are properly seated and not exceeding capacity. Check latches for obstructions and clear if necessary. |
| Choke tube case is difficult to remove/insert. | Misalignment or debris. | Ensure the choke tube case is aligned correctly with its recess. Check for and remove any debris. |
| Case appears warped or damaged. | Exposure to extreme heat or physical impact. | Avoid storing the case in direct sunlight or near heat sources. If significantly damaged, replace the case to ensure proper protection of contents. |
Specifications
| Model Name: | SW100-11 |
| Brand: | MTM |
| Material: | Rugged Polypropylene |
| Color: | Green |
| Capacity: | 100 rounds of 2-3/4" or 3" 12/16/20 gauge; or 50 rounds of 3-1/2" 12/10 gauge. Detachable choke tube case holds up to 9 tubes. |
| Item Dimensions (LxWxH): | 10.1 x 6.5 x 5.7 inches |
| Item Weight: | 1.15 Pounds |
| Manufactured In: | USA |
Warranty and Support
This MTM product is covered by a Manufacturer Warranty. For specific details regarding warranty coverage, claims, or technical support, please refer to the official MTM website or contact MTM customer service directly.
MTM Official Website: www.mtmcase-gard.com
For further assistance, please contact MTM customer support through the channels provided on their website.
