Sony AC-L200 Power Adapter Instruction Manual

Introduction

The Sony AC-L200 Power Adapter is designed to provide continuous power to compatible Sony camcorders that utilize InfoLITHIUM A/P/F series batteries. This compact and portable adapter allows for extended operation of your camcorder without relying solely on battery power, and can also be used for in-camera battery charging if supported by your camcorder model. It operates within a wide AC voltage range, making it suitable for various regions.

This manual provides essential information for the safe and effective use of your AC-L200 Power Adapter, including setup, operation, maintenance, and troubleshooting.

Package Contents

• Sony AC-L200 Power Adapter Unit
• AC Power Cord (for connecting to wall outlet)
• DC Output Cord (for connecting to camcorder)

Setup Instructions

Follow these steps to properly connect your Sony AC-L200 Power Adapter:

1. Connect the DC Output Cord: Locate the DC input jack on your Sony camcorder. Connect the small, proprietary plug of the DC output cord from the AC-L200 adapter into this jack. Ensure a firm connection.
2. Connect the AC Power Cord: Insert the AC power cord into the AC input receptacle on the AC-L200 power adapter unit. This receptacle is typically a two-prong or three-prong port on the adapter itself.
3. Connect to Power Outlet: Plug the other end of the AC power cord into a standard electrical wall outlet (100-240V, 50/60Hz).
4. Verify Connection: Once connected, your camcorder should receive power, indicated by its power indicator light or display.

Image: The Sony AC-L200 Power Adapter unit shown with its two accompanying power cords: one for connecting to the camcorder (left) and one for connecting to a wall outlet (right).

Operating Instructions

The AC-L200 Power Adapter serves two primary functions for compatible camcorders:

• Direct Power Supply: When connected as described in the Setup section, the adapter provides continuous power to your camcorder, allowing for extended recording or playback sessions without draining the camcorder's battery. This is ideal for studio use, long events, or when transferring footage.
• In-Camera Battery Charging: If your camcorder model supports in-camera charging, connecting the AC-L200 adapter will also charge the InfoLITHIUM battery inserted in the camcorder. Refer to your camcorder's specific instruction manual for details on its charging capabilities and indicators.

Important Notes:

• Always ensure the adapter is connected to a power source within the specified voltage range (100-240V AC).
• Disconnect the adapter from the wall outlet when not in use for extended periods.
• Do not attempt to disassemble or modify the adapter.

Maintenance

To ensure the longevity and proper functioning of your AC-L200 Power Adapter, follow these maintenance guidelines:

• Cleaning: Wipe the adapter and cords with a soft, dry cloth. Do not use liquid cleaners, solvents, or abrasive materials.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cords to prevent damage.
• Handling: Avoid dropping the adapter or subjecting it to strong impacts. Do not pull on the cords to disconnect them; always grasp the plug.
• Inspection: Periodically inspect the cords and adapter unit for any signs of damage, such as frayed wires, cuts, or cracks. If damage is observed, discontinue use immediately and seek professional service or replacement.

Troubleshooting

If you encounter issues with your AC-L200 Power Adapter, consider the following common solutions:

• No Power to Camcorder:
  • Ensure both the AC power cord and the DC output cord are securely connected to the adapter and the camcorder.
  • Verify that the wall outlet is functional by plugging in another device.
  • Check for any visible damage to the adapter unit or cords.
• Battery Not Charging (in-camera):
  • Confirm that your specific camcorder model supports in-camera charging with this adapter. Refer to your camcorder's manual.
  • Ensure the battery is correctly inserted into the camcorder.
  • The battery might be fully charged or too hot/cold to charge.
• Adapter Feels Warm: It is normal for the adapter to become warm during operation. If it becomes excessively hot or emits smoke/unusual odors, disconnect it immediately and cease use.

If troubleshooting steps do not resolve the issue, contact Sony customer support for further assistance.

Specifications

Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official Sony support website. Keep your proof of purchase for warranty claims.

If you require technical assistance, replacement parts, or service, please contact Sony Customer Support. Contact details can typically be found on the Sony official website for your region.

Online Support: www.sony.com/electronics/support