1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Bose Wave Radio and CD Player, Model AWRC-1P. Please read this manual thoroughly before using your system to ensure proper function and to maximize your listening experience. The Bose Wave Radio and CD Player is designed to deliver high-quality audio from both radio broadcasts and compact discs.
2. Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
3. Package Contents
Verify that your package contains the following items:
- Bose Wave Radio and CD Player (AWRC-1P)
- Remote Control
- Power Cord
4. Controls and Indicators
Image 4.1: Bose Wave Radio and CD Player AWRC-1P with its accompanying remote control. The main unit features a central control panel and a CD slot, while the remote provides convenient wireless operation.
4.1 Main Unit Controls
| Button/Control | Function |
|---|---|
| On/Off | Powers the system on or off. |
| Stop Alarm | Silences an active alarm. |
| Sleep/Snooze | Activates the sleep timer or snoozes an alarm. |
| Volume Up/Down | Adjusts the audio output level. |
| CD Play/Pause | Starts or pauses CD playback. |
| CD Stop | Stops CD playback. |
| CD Mode | Cycles through CD playback modes (e.g., repeat, shuffle). |
| FM | Selects the FM radio band. |
| AM | Selects the AM radio band. |
| AUX | Selects the auxiliary input source. |
| Alarm 1 On/Off | Activates or deactivates Alarm 1. |
| Alarm 2 On/Off | Activates or deactivates Alarm 2. |
| Alarm Setup | Enters alarm setting mode. |
| Presets (1-6) | Selects stored radio stations. |
| Track/Tune (Up/Down) | Skips CD tracks or tunes radio frequencies. |
4.2 Remote Control Functions
The remote control provides wireless access to most functions of your Wave Radio/CD system. Ensure the remote has working batteries.
| Button | Function |
|---|---|
| On/Off | Powers the system on or off. |
| Sleep | Activates the sleep timer. |
| CD | Selects the CD player source. |
| FM | Selects the FM radio band. |
| AM | Selects the AM radio band. |
| AUX | Selects the auxiliary input source. |
| Volume Up/Down | Adjusts the audio output level. |
| Mute | Mutes or unmutes the audio. |
| Track/Tune (Up/Down) | Skips CD tracks or tunes radio frequencies. |
| Presets (1-6) | Directly selects stored radio stations. |
5. Setup
5.1 Unpacking and Placement
- Carefully remove the system and all accessories from the packaging.
- Place the system on a stable, level surface. Ensure there is adequate ventilation around the unit.
- Avoid placing the system near heat sources, direct sunlight, or in areas with high humidity.
5.2 Power Connection
- Connect the power cord to the AC power input on the back of the Wave Radio/CD system.
- Plug the other end of the power cord into a working AC wall outlet.
5.3 Setting the Clock
- With the system powered on, press and hold the Alarm Setup button until the time display flashes.
- Use the Track/Tune Up/Down buttons to adjust the hour. Press Alarm Setup again to confirm the hour.
- Use the Track/Tune Up/Down buttons to adjust the minute. Press Alarm Setup again to confirm the minute.
- The clock is now set.
6. Operating Instructions
6.1 Power On/Off
Press the On/Off button on the main unit or the remote control to turn the system on or off.
6.2 Radio Operation
- Press the FM or AM button on the main unit or remote to select the desired radio band.
- Use the Track/Tune Up/Down buttons to manually tune to a station. Press and hold to scan for the next strong station.
- Setting Presets:
- Tune to the desired station.
- Press and hold one of the Preset (1-6) buttons until you hear a beep, indicating the station is saved.
- Recalling Presets: Press the desired Preset (1-6) button briefly to recall a saved station.
6.3 CD Player Operation
- Gently insert a CD into the slot located at the front of the system, label side up. The system will automatically draw the CD in.
- Press the CD Play/Pause button to begin playback.
- Use the Track/Tune Up/Down buttons to skip to the next or previous track.
- Press the CD Stop button to stop playback.
- Press the CD Mode button to cycle through playback options such as repeat track, repeat disc, or random play.
- To eject a CD, press the CD Stop button, then gently push the CD further into the slot until it ejects.
6.4 Auxiliary Input
The auxiliary input allows you to connect external audio devices (e.g., MP3 players, smartphones) to your Wave Radio/CD system.
- Connect an audio cable (not included) from the headphone jack or line-out of your external device to the AUX IN jack on the back of the Wave Radio/CD system.
- Press the AUX button on the main unit or remote control to select the auxiliary input source.
- Adjust the volume on both your external device and the Wave Radio/CD system for optimal sound.
6.5 Alarm Function
Your system features two independent alarms.
- Setting an Alarm:
- Press and hold Alarm Setup until the alarm time flashes.
- Press Alarm 1 On/Off or Alarm 2 On/Off to select which alarm to set.
- Use Track/Tune Up/Down to set the hour, then press Alarm Setup.
- Use Track/Tune Up/Down to set the minute, then press Alarm Setup.
- Use Track/Tune Up/Down to select the alarm source (FM, AM, CD, or Tone), then press Alarm Setup.
- Use Track/Tune Up/Down to set the alarm volume, then press Alarm Setup.
- Activating/Deactivating Alarms: Press Alarm 1 On/Off or Alarm 2 On/Off briefly to toggle the respective alarm on or off. An alarm icon will appear on the display when active.
- Snooze: When an alarm sounds, press Sleep/Snooze to temporarily silence it for 10 minutes.
- Stopping an Alarm: Press Stop Alarm to turn off the alarm completely until the next set time.
6.6 Sleep Timer
The sleep timer allows the system to play for a set duration before automatically turning off.
- While the system is playing, press the Sleep/Snooze button (or Sleep on the remote) repeatedly to cycle through sleep times (e.g., 10, 20, 30, 60, 90 minutes).
- The system will turn off automatically after the selected time.
7. Maintenance
7.1 Cleaning the System
- Unplug the system from the power outlet before cleaning.
- Use a soft, dry cloth to clean the exterior surfaces.
- Do not use liquid cleaners, sprays, or solvents, as they may damage the finish or internal components.
7.2 CD Care
- Handle CDs by their edges to avoid fingerprints.
- Clean CDs with a soft, lint-free cloth, wiping from the center outwards.
- Store CDs in their cases to prevent scratches and dust accumulation.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not securely connected. | Ensure the power cord is firmly plugged into the system and a working wall outlet. |
| No sound | Volume is too low or muted. Incorrect source selected. | Increase volume. Press Mute on the remote. Select the correct source (FM, AM, CD, AUX). |
| CD not playing or skipping | CD is dirty, scratched, or inserted incorrectly. | Clean the CD. Check for scratches. Re-insert the CD label side up. |
| Poor radio reception | Interference or weak signal. | Adjust the system's position. Try tuning to a stronger station. |
| Remote control not working | Batteries are dead or inserted incorrectly. Obstruction between remote and system. | Replace remote batteries. Ensure clear line of sight to the system's sensor. |
9. Specifications
- Model: AWRC-1P
- Dimensions (L x W x H): 18 x 8 x 11 inches (45.7 x 20.3 x 27.9 cm)
- Weight: 14.8 pounds (6.7 kg)
- Power Supply: AC 120V, 60Hz (specifics may vary by region)
- Radio Tuner: AM/FM with 5 AM and 5 FM presets
- CD Player: Single disc slot-loading
- Connectivity: Auxiliary input (3.5mm jack)
10. Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Bose website. If you require technical assistance or have questions not covered in this manual, please contact Bose customer support through their official channels.
Bose Official Website: www.bose.com
