Classic Accessories Over Drive RV Wheel Covers Instruction Manual

Introduction

The Classic Accessories Over Drive RV Wheel Covers are designed to provide sturdy protection for your RV's tires and wheels. They guard against sun damage, dirt, and rust, ensuring the longevity of your tires when your RV is parked. This manual provides essential information on the proper setup, operation, maintenance, and specifications of your wheel covers.

Setup and Installation

Proper installation ensures maximum protection and a secure fit for your RV wheel covers. The covers feature a fast and easy slip-on design.

Measuring for Fit:

Ensure you have the correct size covers for your RV wheels. This model is designed for wheels 21"-24" in diameter with an 8.25" tire width. To confirm fit, measure your tire's diameter and width.

Image: Classic Accessories RV Wheel Covers securely installed on the wheels of a recreational vehicle, demonstrating their protective coverage.

Installation Steps:

1. Ensure the tire and wheel are clean and free of debris.
2. Align the wheel cover with the tire. The elasticized edge should go around the entire tire.
3. Carefully slip the cover over the top of the tire, working your way down both sides until the entire tire face and sidewalls are covered.
4. Adjust the cover to ensure a snug fit, minimizing any loose areas that could catch wind.

Operation

The Classic Accessories Over Drive RV Wheel Covers are designed for stationary use to protect your tires from environmental elements. They are not intended for use while the vehicle is in motion.

• Application: Apply the covers when your RV is parked for extended periods, such as during storage or at a campsite.
• Removal: To remove, simply pull the elasticized edge away from the tire and slide the cover off. Fold neatly for storage to prevent creasing and prolong product life.

Care and Maintenance

To maintain the effectiveness and appearance of your wheel covers, follow these simple care instructions:

• Cleaning: The covers are made from water-resistant, wipe-clean vinyl. Use a damp cloth and mild soap to clean dirt or stains. Rinse thoroughly and allow to air dry completely before storing.
• Storage: Store the covers in a cool, dry place when not in use. Avoid folding them tightly for long periods to prevent permanent creases.
• Inspection: Periodically inspect the covers for any signs of wear, tears, or damage. Early detection can help prevent further deterioration.

Image: A close-up view demonstrating the water-resistant property of the wheel cover material, with water droplets beading on the surface.

Troubleshooting

• Covers do not fit snugly: Ensure you have selected the correct size based on your tire's diameter and width. Refer to the "Setup and Installation" section for proper measurement.
• Covers blow off in wind: A snug fit is crucial. Re-adjust the elasticized edge to ensure it is fully wrapped around the tire. If the issue persists, verify the size is appropriate for your tire dimensions.
• Material shows signs of wear/cracking prematurely: While designed for durability, extreme prolonged exposure to harsh UV rays can affect material lifespan. Ensure covers are properly installed and consider additional shade if parked in direct, intense sunlight for very long periods.

Product Specifications

What's in the Box

Each package of Classic Accessories Over Drive RV Wheel Covers includes:

• Two (2) Classic Accessories 21"-24", 8.25" Wide RV Wheel Covers (Snow White)

Warranty and Support

Warranty Information:

The Classic Accessories Over Drive RV Wheel Covers come with a two-year limited warranty. For detailed warranty terms and conditions, please refer to the official Classic Accessories website or contact their customer service.

Customer Support:

For any questions, assistance, or warranty claims, please visit the official Classic Accessories store or contact their customer service team. You can find more information and contact details at the Classic Accessories Store on Amazon.