Orbit SuperDial 6-Station Timer Instruction Manual

Product Overview

The Orbit SuperDial 6-Station Timer (Model 57976) is designed for efficient control of irrigation systems. This timer supports up to 9 zones or valves and features a user-friendly interface with large buttons and a bright, backlit LCD screen for easy readability and navigation. It offers flexible programming options, including two independent programs, and a convenient rain delay function.

Image: Front view of the Orbit SuperDial 6-Station Timer, showing the LCD display, control dial, and various buttons for programming and manual operation.

Setup and Installation

The Orbit SuperDial 6-Station Timer offers versatile installation options for both indoor and outdoor environments. Its heavy-duty, UV-resistant cabinet protects the timer from sun, rain, and other weather conditions, ensuring durability. A keyed lock is included to prevent tampering.

Electrical Connections:

• Indoor Installation: For indoor use, the timer comes with a 3-pronged plug, allowing direct connection to standard electrical outlets.
• Outdoor/Hardwired Installation: The built-in transformer allows the timer to be hardwired directly into a 100 VAC breaker box using a 1/2-inch inlet. This option is suitable for permanent outdoor installations.

Mounting:

Select a suitable location for mounting, ensuring it is easily accessible for programming and maintenance. Use appropriate fasteners to secure the timer to a wall or sturdy surface.

Wiring to Valves:

Connect your irrigation system's zone valves to the corresponding terminals on the timer. Ensure the common wire from all valves is connected to the common terminal on the timer. This timer supports up to 9 zones.

Operating Instructions

The SuperDial timer is designed for intuitive operation. The large display and touch-screen technology simplify programming and adjustments.

Setting the Current Time and Date:

1. Rotate the main dial to the "TIME/DATE" position.
2. Use the + and - buttons to adjust the hour, then press the NEXT button to move to minutes, and then to the date.
3. Press ENTER to confirm settings.

Programming Watering Schedules:

The timer features two independent programs (A and B) that can be set to run your sprinkler system multiple times a day, with run times from 1 to 99 minutes per zone.

1. Rotate the main dial to "PROGRAM A" or "PROGRAM B".
2. Set Start Times: Use the + and - buttons to set the desired start times for watering cycles. Multiple start times can be set for each program.
3. Set Zone Run Times: Rotate the dial to "ZONE DURATION". Select each zone using the NEXT button and set the watering duration (1-99 minutes) using the + and - buttons.
4. Set Watering Days: Rotate the dial to "DAY OF WEEK". Select the days you wish for the program to run.
5. Once programming is complete, rotate the dial to "AUTO" for automatic operation.

Rain Delay Function:

If rain is expected or has occurred, you can temporarily suspend the watering schedule using the rain delay feature.

• Press the RAIN DELAY button.
• Select the desired delay period: 24, 48, or 72 hours.
• The timer will automatically resume its schedule after the selected delay period.

Manual Operation:

To manually water a zone or all zones, press the MANUAL button and follow the on-screen prompts to select zones and durations.

Maintenance

The Orbit SuperDial 6-Station Timer is designed for minimal maintenance. To ensure optimal performance and longevity:

• Keep the timer's exterior clean by wiping it with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Ensure the cabinet door is securely closed to protect internal components from moisture and debris.
• Periodically check electrical connections for any signs of wear or corrosion, especially if installed outdoors.
• During winter months in freezing climates, it is recommended to disconnect the timer and store it indoors to prevent damage from freezing water in the lines or valves.

Troubleshooting

If you encounter issues with your Orbit SuperDial 6-Station Timer, consider the following common solutions:

• Timer Display is Blank:
  • Check the power connection. Ensure the plug is fully inserted into the outlet or that the hardwired connection is secure and receiving power.
  • Verify that the circuit breaker for the timer's power source is not tripped.
• Zones Not Watering:
  • Ensure the main water supply to your irrigation system is turned on.
  • Check that the timer is set to "AUTO" mode.
  • Verify that the watering schedule is correctly programmed with appropriate start times, run times, and watering days.
  • Check the wiring connections to the individual zone valves and the common wire. Loose or corroded connections can prevent valves from opening.
  • Ensure the rain delay function is not active.
• Watering at Unexpected Times:
  • Review your programmed start times for both Program A and Program B.
  • Check the current time and date settings on the timer to ensure they are accurate.
• Error Messages on Display:
  • Refer to the specific error code in the full product manual (if available) or contact Orbit customer support for assistance.

If these steps do not resolve the issue, please contact Orbit customer support.

Specifications

Warranty and Support

For detailed warranty information regarding your Orbit SuperDial 6-Station Timer, please refer to the documentation included with your purchase or visit the official Orbit website. Orbit provides customer support for product inquiries, technical assistance, and warranty claims.

Contact Information: Please visit the Orbit Store on Amazon or the official Orbit website for the most current support contact details, including phone numbers and online resources.