Introduction
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your Piko 62019 G Furniture Werke Franz Huber model kit. This highly detailed model is designed for G scale model railway layouts and is suitable for both indoor and outdoor use due to its weather-resistant properties. Please read all instructions carefully before beginning assembly.
Recommended Age: 14 years and up.
Product Overview
Image: The Piko 62019 G Furniture Werke Franz Huber model kit, featuring a multi-story factory building with a prominent chimney and water tower, alongside a G scale train and associated railway infrastructure. The scene depicts a bustling industrial setting, highlighting the intricate details of the model structure and its integration into a railway environment.
The Piko 62019 is a meticulously designed model kit representing a furniture factory, "Werke Franz Huber," intended for G scale model railway enthusiasts. This kit allows for the creation of a realistic industrial building that enhances any G scale layout. Its robust construction ensures durability, and its weather-resistant design makes it suitable for both indoor and outdoor display.
Package Contents
Before beginning assembly, please verify that all components are present and undamaged. Refer to the parts list diagram (not provided in this digital format, typically found in the physical kit) to identify each piece.
- All plastic molded parts for the factory building structure.
- Clear plastic sheets for windows.
- Decal sheet for signage and details.
- Assembly instructions (this manual).
- Note: Adhesives and paints are not included and must be purchased separately.
Setup and Assembly
Assembly of the Piko 62019 model kit requires careful attention to detail. It is recommended to work on a clean, well-lit surface.
Required Tools and Materials (Not Included):
- Plastic model cement (e.g., polystyrene cement)
- Hobby knife or sprue cutters
- Small files or sandpaper for deburring
- Tweezers for small parts
- Paints (optional, for detailing)
- Small brushes (optional, for painting)
Assembly Steps:
- Preparation: Carefully remove all parts from the sprues using sprue cutters or a hobby knife. Clean any excess plastic (flash) with a hobby knife or fine sandpaper.
- Wall Assembly: Begin by assembling the main wall sections. Ensure proper alignment before applying cement. Hold parts firmly together until the cement sets.
- Window and Door Installation: Insert clear plastic sheets into window frames from the inside. Attach door frames and doors as indicated in the diagrams.
- Roof and Chimney: Assemble the roof sections, ensuring a snug fit. Attach the chimney and any other roof details.
- Detailing: Apply decals as per the provided diagram for signage and architectural details. Allow decals to dry completely.
- Final Assembly: Join all major sub-assemblies (e.g., main building, annexes, water tower) to form the complete structure.
- Placement: Once fully assembled and dry, the model can be placed on your G scale layout. Ensure the base is level for stability.
Operating Considerations
The Piko 62019 is a static model building and does not have operational components. Its primary function is to enhance the realism and aesthetic appeal of your G scale model railway layout.
- Integration: Position the factory building strategically on your layout to complement railway tracks, roads, and other scenery elements.
- Lighting (Optional): The model is designed to allow for internal lighting. If you wish to illuminate the building, install miniature LED lights or grain-of-wheat bulbs (not included) during assembly, routing wires discreetly. Consult a qualified electrician if unsure about wiring.
- Figures and Vehicles: Enhance the scene by adding G scale figures and vehicles around the factory to depict daily operations and activity.
Maintenance
Proper maintenance will ensure the longevity and appearance of your Piko 62019 model.
- Cleaning: Dust the model regularly with a soft brush or a can of compressed air. For stubborn dirt, gently wipe with a damp cloth and mild soap, then dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Outdoor Use: While weather-resistant, prolonged exposure to extreme weather conditions (e.g., direct sunlight, heavy rain, snow, freezing temperatures) can affect the model over time. Consider bringing the model indoors during harsh weather or providing additional protection.
- Repairs: If parts become detached or damaged, use plastic model cement to reattach them. Small chips or scratches can be touched up with appropriate model paints.
Troubleshooting
This section addresses common issues that may arise during or after assembly.
| Problem | Possible Cause | Solution |
|---|---|---|
| Parts do not fit together properly. | Excess plastic (flash) on parts; misalignment during assembly; incorrect part selection. | Carefully trim flash with a hobby knife. Ensure parts are correctly oriented before cementing. Double-check part numbers against the assembly diagrams. |
| Cement does not hold parts. | Insufficient cement applied; incorrect type of cement used; parts not held long enough. | Apply a thin, even coat of plastic model cement. Ensure you are using cement specifically for polystyrene plastic. Hold parts firmly for the recommended drying time. |
| Model appears unstable on layout. | Uneven base surface; parts not fully seated during assembly. | Ensure the surface where the model is placed is level. Re-check all major joints for proper seating. Consider adding weight to the base if necessary (e.g., small lead weights, sand). |
| Decals do not adhere or wrinkle. | Surface not clean; improper application technique; air bubbles trapped. | Ensure the surface is clean and smooth. Follow decal application instructions carefully, using water and a soft brush to position and remove air bubbles. Consider using decal setting solution. |
Specifications
| Feature | Detail |
|---|---|
| Product Name | Piko G Furniture Werke Franz Huber |
| Model Number | 62019 |
| Scale | G Scale (Garden Railway) |
| Product Type | Model Kit (Building Structure) |
| Material | Durable Plastic |
| Weather Resistance | Yes, suitable for indoor or outdoor use |
| Recommended Age | 14 years and up (as per product description) |
| Approximate Item Weight | 10.56 pounds (4.79 kg) |
| ASIN | B00092CXOU |
| Manufacturer | Piko |
| Release Date | April 1, 2016 |
Warranty and Support
Piko products are manufactured to high quality standards. For specific warranty information or technical support regarding your Piko 62019 model kit, please refer to the official Piko website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
Manufacturer: Piko
For further assistance, please visit the official Piko website or contact their customer support channels.
