Introduction
The ACCUSPLIT Pro Survivor A601X is a durable and reliable stopwatch designed for basic timing needs. It features an ergonomic 'X' case, a large display for easy viewing, and robust million-cycle buttons. This manual provides essential information for setting up, operating, and maintaining your A601X stopwatch.
Image: The ACCUSPLIT Pro Survivor A601X stopwatch, showcasing its large display and durable design.
Setup
Battery Installation
The A601X stopwatch is powered by a CR2032 lithium battery, which typically provides up to 5 years of life. If the display is dim or blank, the battery may need replacement. To replace the battery, carefully open the back casing. Ensure the water-resistant seal is properly seated when reassembling to maintain the device's water resistance.
Initial Time and Date Setting
The A601X operates on a two-button system for setting the time and date. While specific steps may vary slightly, generally:
- Press the MODE button to cycle through different display modes until you reach the time/date setting mode.
- Use the START/STOP button to adjust the flashing digits (hours, minutes, month, day).
- Use the SPLIT/RELEASE/RESET button to move to the next setting field.
- Confirm your settings by pressing the MODE button again to exit the setting mode.
Refer to the detailed instructions provided with your stopwatch or on the official ACCUSPLIT website for precise steps, as the sequence can be specific to the operating system version.
Operating Instructions
The A601X stopwatch is designed for straightforward operation with its two-button system.
Basic Timing (Start, Stop, Reset)
- To START timing, press the START/STOP button (typically the right button).
- To STOP timing, press the START/STOP button again.
- To RESET the stopwatch to zero, press the SPLIT/RELEASE/RESET button (typically the left button) while the stopwatch is stopped.
Cumulative Split Timing
The A601X captures cumulative splits, meaning it measures the elapsed time from the start to each subsequent split point.
- Press the START/STOP button to begin timing.
- Press the SPLIT/RELEASE/RESET button to record a cumulative split time. The display will momentarily show the split time while the internal timer continues to run.
- Press the SPLIT/RELEASE/RESET button again to release the display and show the running total time.
- Press the START/STOP button to stop the timer.
- Press the SPLIT/RELEASE/RESET button to reset.
1, 2 Fast Finish
This function allows for recording the finish times of two participants in quick succession.
- Press the START/STOP button to begin timing.
- When the first participant finishes, press the SPLIT/RELEASE/RESET button to record their time. The display will show the first finish time.
- When the second participant finishes, press the START/STOP button to record their time and stop the timer. The display will show the second finish time.
- Press the SPLIT/RELEASE/RESET button to view the first finish time again.
- Press the SPLIT/RELEASE/RESET button again to reset the stopwatch.
Event/Time Out
The Event/Time Out function allows you to pause the timing for an event and then resume it.
- Press the START/STOP button to begin timing.
- To pause the timing (Time Out), press the START/STOP button. The display will hold the current time.
- To resume timing, press the START/STOP button again. The timer will continue from where it left off.
- To end the event, press the START/STOP button to stop the timer.
- Press the SPLIT/RELEASE/RESET button to reset.
Time of Day and Date Display
In addition to stopwatch functions, the A601X can display the current time of day and date.
- Press the MODE button to cycle through the available display modes until the time of day and date are shown.
- The display supports both 12-hour and 24-hour formats.
Maintenance
Cleaning
To clean your stopwatch, wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the casing or display.
Water Resistance
The A601X is water resistant up to 30 meters (100 feet). This means it can withstand splashes, rain, and brief immersion in water. It is not recommended for swimming or diving. Ensure the battery compartment is securely closed to maintain water resistance.
Shock Resistance
The stopwatch is designed to be shock resistant, providing durability against accidental drops and impacts during normal use.
Battery Replacement
When replacing the CR2032 battery, exercise caution to avoid damaging the internal components or compromising the water-resistant seal. If you are unsure, it is recommended to have the battery replaced by a qualified technician or refer to specific instructions on the ACCUSPLIT website.
Troubleshooting
Display is Blank or Dim
- Check Battery: The most common cause is a depleted battery. Replace the CR2032 battery as described in the Maintenance section.
- Battery Contact: Ensure the battery is correctly seated and making proper contact with the terminals.
Difficulty Setting Time/Date
- Refer to Instructions: The time and date setting procedure can be specific. Consult the detailed instructions that came with your stopwatch or visit the official ACCUSPLIT website for a digital copy.
- Button Sequence: Ensure you are following the correct sequence of button presses (MODE, START/STOP, SPLIT/RELEASE/RESET) as outlined in the Setup section.
Buttons Not Responding
- Check for Debris: Ensure no dirt or debris is lodged around the buttons.
- Reset: If the stopwatch is unresponsive, try removing and reinserting the battery to perform a hard reset.
Specifications
| Feature | Detail |
|---|---|
| Model Number | A601XLN |
| Brand | ACCUSPLIT |
| Color | Lemon |
| Material | Plastic |
| Product Dimensions (D x W x H) | 0.75" x 2.5" x 3" |
| Item Weight | 2.4 ounces |
| Timing Interval | 1/100 Second |
| Timing Range | Up to 24 Hours |
| Battery Type | CR2032 Lithium (3V) |
| Water Resistance | Up to 30 meters (100 feet) |
| Shock Resistance | Yes |
| Display | Magnum XL Digital Display |
| Buttons | Million Cycle No Fail Buttons |
Warranty
The ACCUSPLIT Pro Survivor A601X comes with a 5-Year DUAL No Proof of & Proof of Purchase Limited Warranty. This warranty covers manufacturing defects and ensures the product's performance under normal use. Please retain your proof of purchase for warranty claims.
Support
For further assistance, detailed instructions, FAQs, or to contact customer service, please visit the official ACCUSPLIT website. You may find additional resources and support specific to your A601X model there.
