Compaq KB-0133 PS/2 Windows Keyboard User Manual

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Compaq KB-0133 PS/2 Windows Keyboard. Designed for reliability and ease of use, this keyboard features a standard layout and 8 dedicated hot keys for enhanced productivity. Please read this manual thoroughly before using your keyboard.

2. Setup

2.1 Package Contents

• Compaq KB-0133 PS/2 Windows Keyboard
• This User Manual

2.2 Connecting the Keyboard

1. Power Off: Ensure your computer is completely powered off before connecting the keyboard.
2. Locate PS/2 Port: Identify the PS/2 keyboard port on the back of your computer. This port is typically purple and circular.
3. Connect Keyboard: Align the PS/2 connector from the keyboard with the PS/2 keyboard port on your computer. Gently push until it is firmly seated. Do not force the connection.
4. Power On: Power on your computer. The operating system should automatically detect and configure the keyboard. No additional drivers are typically required for standard PS/2 keyboards.

Figure 2.2.1: Top-down view of the Compaq KB-0133 PS/2 Keyboard, illustrating the key layout and PS/2 cable.

3. Operating Instructions

3.1 Basic Keyboard Functions

The Compaq KB-0133 keyboard functions as a standard 104-key Windows keyboard. All alphanumeric keys, function keys (F1-F12), navigation keys (arrows, Home, End, Page Up, Page Down), and the numeric keypad operate as expected within your operating system and applications.

3.2 Hot Keys

This keyboard features 8 dedicated hot keys, typically located above the function keys or on the side. These keys are designed to provide quick access to common functions such as volume control, media playback, or launching specific applications. The exact functionality of these hot keys may depend on your operating system and any installed Compaq utility software. Refer to your computer's documentation for specific hot key configurations.

Figure 3.2.1: Angled view of the Compaq KB-0133 PS/2 Keyboard, showing the hot keys.

4. Maintenance

4.1 Cleaning

• Dust Removal: Use a can of compressed air to remove dust and debris from between the keys.
• Surface Cleaning: Dampen a soft, lint-free cloth with a mild cleaning solution (e.g., water with a small amount of dish soap) and gently wipe the keycaps and keyboard surface. Avoid excessive moisture.
• Disinfecting: For disinfection, use an alcohol-based wipe (70% isopropyl alcohol) and gently wipe surfaces.
• Avoid: Do not spray liquid cleaners directly onto the keyboard. Ensure the keyboard is disconnected from the computer before cleaning.

4.2 Storage

Store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures. Protect it from excessive dust and moisture when not in use for extended periods.

5. Troubleshooting

5.1 Keyboard Not Responding

• Check Connection: Ensure the PS/2 connector is securely plugged into the correct port on your computer.
• Restart Computer: A simple restart can often resolve connectivity issues.
• Test on Another Port/Computer: If possible, try connecting the keyboard to a different PS/2 port or another computer to determine if the issue is with the keyboard or the computer's port.
• Operating System Compatibility: Note that this keyboard is designed for older Windows operating systems. Some users have reported compatibility issues with newer operating systems like Windows 7.

5.2 Specific Keys Not Working

• Clean Keys: Dust or debris under the keycap can prevent it from functioning. Refer to the cleaning instructions in Section 4.1.
• Software Interference: Ensure no software or drivers are interfering with keyboard input.

6. Specifications

7. Warranty and Support

As this product is an older model, specific warranty information may no longer be available from the original manufacturer. For any support or warranty inquiries, please refer to the terms and conditions provided by your point of purchase or contact the seller directly.