1. Introduction
The Corona RK 62060 Fixed Tine Shrub Rake is designed for clearing leaves and debris from shrubs, flower beds, and other small garden areas. Its construction emphasizes durability and ease of use for various gardening tasks.
Key features include an 8-inch wide head with 11 fixed tines, an aluminum handle, and an anti-slip vinyl sleeve for grip.
Figure 1: Corona RK 62060 Fixed Tine Shrub Rake
2. Setup
The Corona RK 62060 Shrub Rake is delivered pre-assembled and ready for immediate use. No additional assembly steps are required.
- Initial Inspection: Before first use, inspect the rake for any signs of shipping damage. Verify that the handle is securely attached to the rake head and that all 11 tines are intact and properly aligned.
- Handle Grip: The aluminum handle features an anti-slip vinyl sleeve. Ensure this sleeve is free from tears or damage to maintain optimal grip during operation.
Figure 2: Shrub rake in a garden setting
3. Operating Instructions
This section provides guidance on effectively using your Corona RK 62060 Shrub Rake.
- Grip: Hold the rake firmly by the aluminum handle. The anti-slip vinyl sleeve is designed to provide a comfortable and secure grip during use.
- Positioning: Position the 8-inch wide rake head with its 11 fixed tines near the base of shrubs, around delicate plants, or in narrow spaces where larger rakes cannot reach.
- Raking Motion: Gently pull the rake towards you to gather leaves, grass clippings, and other light garden debris. The tines are designed to apply light pressure, facilitating debris removal while minimizing disturbance to plant feeder roots. A bi-curved bow distributes pressure evenly across the tines for consistent collection.
- Targeted Cleaning: The narrow head design allows for precise raking between closely spaced plants without causing damage.
- Debris Collection: Once debris is gathered, lift the rake and deposit the material into a collection bag or compost pile.
Figure 3: Detail of the aluminum handle with anti-slip grip
Figure 4: Raking around shrubs
Figure 5: Detail of the 11 fixed tines
4. Maintenance
Proper maintenance ensures the longevity and performance of your shrub rake.
- Cleaning: After each use, remove any soil, leaves, or plant residue from the rake head and tines. A stiff brush or water can be used for cleaning.
- Drying: Thoroughly dry all metal components of the rake after cleaning to prevent rust and corrosion.
- Storage: Store the rake in a dry, protected area, away from direct sunlight and extreme temperatures. Hanging the rake can help prevent tines from bending under pressure.
- Inspection: Periodically inspect the connection point between the handle and the rake head to ensure it remains secure. Check tines for any signs of wear or damage.
Figure 6: Rake head after use, ready for cleaning
5. Troubleshooting
This section addresses common issues that may arise during the use of your shrub rake.
- Bent Tines: If a tine becomes slightly bent, it may be carefully straightened using pliers. Apply gentle, consistent pressure to avoid breakage. If multiple tines are severely bent or broken, replacement of the rake head or the entire tool may be necessary.
- Ineffective Debris Collection: Ensure the tines are free of accumulated debris. If the rake is not effectively gathering material, verify that the tines are not excessively worn or damaged. Adjust your raking technique to ensure full contact with the ground.
- Handle Damage: While the aluminum handle is durable, inspect it for any cracks or severe bends if the rake has been subjected to unusual stress. Damage to the anti-slip vinyl sleeve may reduce grip; if severely compromised, consider replacement or repair.
6. Specifications
| Model Number | RK 62060 |
| Head Material | Aluminum (Tempered Steel Tines) |
| Rake Type | Shrub Rake (Garden Rake) |
| Head Size | 8 inches wide |
| Handle Material | Aluminum with Anti-Slip Vinyl Sleeve |
| Product Dimensions | 7.5 x 6.5 x 61 inches |
| Item Weight | 11.2 ounces |
| UPC | 038313620608 |
7. Warranty and Support
Corona products are manufactured to high standards of quality and durability. The Corona RK 62060 Fixed Tine Shrub Rake is backed by a lifetime warranty, ensuring reliable service under normal use conditions.
For detailed warranty information, to register your product, or for any product support inquiries, please visit the official Corona website or contact their customer service department directly. Keep your purchase receipt as proof of purchase for warranty claims.
Official Website: Visit the Corona Store on Amazon
