Scosche FD16B
Scosche FD16B Stereo Wiring Harness Instruction Manual
Model: FD16B
Compatible with Select Non-Amplified 1998-2011 Ford, Lincoln, Mazda, Mercury and Nissan Vehicles
Product Overview
The Scosche FD16B Stereo Wiring Harness is designed to facilitate the installation of an aftermarket car stereo in select non-amplified Ford, Lincoln, Mazda, Mercury, and Nissan vehicles manufactured between 1998 and 2011. This harness provides a direct connection to your vehicle's factory wiring, eliminating the need to cut or splice original wires, ensuring a clean and professional installation. It is constructed with OEM quality wire and connectors for durability and reliable performance.
Image: Scosche FD16B Stereo Wiring Harness, showing the white vehicle connector and the multi-colored wires for connecting to an aftermarket stereo.
Vehicle Compatibility
This harness is compatible with a wide range of non-amplified vehicles. Please refer to the fit guide below to confirm compatibility with your specific make, model, and year. Note that some vehicles may have limited compatibility based on trim level, and this harness is not compatible with factory amplified systems.
Image: Fit Guide for Scosche FD16B, listing compatible Ford, Lincoln, Mazda, Mercury, and Nissan models and years from 1998-2011.
Setup and Installation
Installation of the Scosche FD16B harness is designed to be straightforward. It connects directly to your vehicle's factory radio harness and provides color-coded wires that match the industry standard for aftermarket stereos.
Wiring Connections
Connect the wires from the Scosche FD16B harness to the corresponding wires on your new aftermarket stereo's wiring harness. The wires are color-coded according to EIA industry standards for easy identification. Each wire is individually labeled.
Image: Diagram illustrating how the Scosche car stereo connector quickly connects factory wiring to a new stereo, highlighting factory quality and standard color-coded wires.
EIA Wire Color Code Chart
Refer to the following chart for standard wire color assignments. Always cross-reference with your aftermarket stereo's owner's manual for specific wiring details before making any connections.
Image: Electronics Industry Association (EIA) Wire Color Code Chart, detailing common wire colors and their functions (e.g., Yellow for 12V Battery Constant, Red for 12V Battery Switched, Black for Chassis Ground, etc.).
Connecting the Harness
- Identify the corresponding wires on both the Scosche FD16B harness and your aftermarket stereo's harness using the EIA color code chart and your stereo's manual.
- Carefully strip a small portion of insulation from the ends of matching wires.
- Securely connect the wires using appropriate methods such as crimp connectors, soldering, or heat shrink butt connectors. Ensure all connections are firm and insulated to prevent short circuits.
- Once all connections are made between the aftermarket stereo harness and the FD16B harness, plug the FD16B harness into your vehicle's factory radio connector.
- Test the stereo's functionality (power, audio, balance, fade, etc.) before fully reassembling the dashboard.
Operation
Once installed, the Scosche FD16B harness enables the proper electrical connection between your aftermarket stereo and your vehicle's electrical system. The operation of your stereo will then be governed by the features and controls of the aftermarket unit itself. Ensure all connections are secure for consistent performance.
Maintenance
The Scosche FD16B wiring harness requires minimal maintenance. Ensure that all connections remain secure and free from moisture or excessive vibration. Periodically check the connections if you experience any intermittent issues with your stereo. Keep the harness away from sharp objects or extreme temperatures that could damage the wiring insulation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stereo does not power on. | Incorrect power wire connection (Yellow/Red), blown fuse, poor ground connection (Black). | Verify constant (Yellow) and switched (Red) 12V connections. Check stereo and vehicle fuses. Ensure Black wire is securely grounded. |
| No sound from speakers. | Incorrect speaker wire connections, speaker polarity reversed, amplifier not turning on (if applicable). | Double-check all speaker wire connections (e.g., White, Gray, Green, Purple). Ensure correct polarity (+/-). If using an external amp, verify remote turn-on wire (Blue/White). |
| Intermittent power or sound. | Loose wire connections, damaged wiring. | Inspect all connections for tightness and proper insulation. Check for any visible damage to the harness wires. |
| Radio loses memory presets. | Constant 12V wire (Yellow) not connected or losing power. | Ensure the Yellow wire from the harness is correctly connected to a constant 12V source. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Scosche |
| Model Number | FD16B |
| Material | Copper, Polyvinyl Chloride (PVC) |
| Item Dimensions (L x W x H) | 0.75 x 4.25 x 7.5 inches |
| Item Weight | 0.8 ounces (22.68 g) |
| Cable Type | Speaker |
| Connector Type | Multi-pin Vehicle Connector |
| Color | White (connector) |
| UPC | 033991984608 |
Warranty and Support
The Scosche FD16B Stereo Wiring Harness is backed by Scosche's Limited Lifetime Warranty, ensuring quality and reliability. Additionally, Scosche provides Lifetime Tech Support to assist you with any installation or product-related inquiries. For support, please visit the official Scosche website or contact their customer service.
Related documentsFD16B
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.