Helen Of Troy Hot Spa Ultimate Foot Bath - Model 61360 User Manual

Introduction

Thank you for choosing the Helen Of Troy Hot Spa Ultimate Foot Bath, Model 61360. This foot bath is designed to provide a relaxing and soothing experience for your feet. It features the ability to heat cold water to your desired temperature and offers adjustable settings for personalized comfort. Please read this manual thoroughly before initial use to ensure safe and proper operation.

Important Safety Instructions

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

• DANGER: To reduce the risk of electrocution, always unplug this appliance from the electrical outlet immediately after using and before cleaning. Do not reach for an appliance that has fallen into water. Unplug it immediately.
• WARNING: To reduce the risk of burns, fire, electrocution, or injury to persons:
• An appliance should never be left unattended when plugged in.
• Close supervision is necessary when this appliance is used by, on, or near children or invalids.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
• Keep the cord away from heated surfaces.
• Never use while sleeping or drowsy.
• Never drop or insert any object into any opening.
• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
• Do not use outdoors.
• Do not immerse in water or other liquids.
• Do not use on sensitive skin or in the presence of poor circulation.
• Consult your doctor before using if you are pregnant, have diabetes, phlebitis, or any other medical condition.

Package Contents

Please check the package for the following items:

• Helen Of Troy Hot Spa Ultimate Foot Bath (Model 61360)
• Instruction Manual
• Pedicure attachments (if included with your model)

Setup

1. Place the foot bath on a flat, stable, and waterproof surface. Ensure the surface can withstand potential splashes.
2. Fill the foot bath with warm or cold water up to the indicated maximum fill line. Do not overfill.
3. Plug the power cord into a standard electrical outlet. Ensure your hands are dry before plugging in the unit.
4. Position yourself comfortably to place your feet into the foot bath.

Image: The Helen Of Troy Hot Spa Ultimate Foot Bath, Model 61360, shown filled with water and ready for operation. The unit is white and aqua, featuring a textured footrest and control panel.

Operating Instructions

The Helen Of Troy Hot Spa Ultimate Foot Bath is designed for ease of use. The controls are typically operated by a single button or a set of buttons accessible by your toes.

1. Power On/Off: Press the main power button to turn the unit on. This button often activates the heating, vibration, and jet functions simultaneously.
2. Heating Function: The foot bath is designed to heat the water to a comfortable temperature and maintain it. If you start with cold water, the unit will gradually warm it. If you start with warm water, it will help maintain that temperature.
3. Vibration Massage: The vibration feature provides a gentle massage to soothe tired feet. This function is typically activated with the main power button.
4. Water Jets: The integrated water jets provide a bubbling sensation. Be aware that water jets can cause splashing, especially if the water level is high or if feet are moved vigorously.
5. Adjusting Settings: Some models allow for adjustment of settings (e.g., turning off vibration or jets independently) using toe-touch controls. Refer to the specific markings on your unit for these options.
6. Duration of Use: For optimal results and safety, limit each session to 20-30 minutes.
7. Power Off: After use, press the power button to turn off the unit, then unplug it from the electrical outlet.

Maintenance and Cleaning

Regular cleaning ensures the longevity and hygienic operation of your foot bath.

1. Unplug Before Cleaning: Always ensure the unit is unplugged from the power outlet before cleaning.
2. Empty Water: Carefully pour out the water from the foot bath. Some units may have a drain plug; if not, tilt the unit to empty. Avoid spilling water onto the control panel or power cord.
3. Clean Surfaces: Wipe down the interior and exterior surfaces with a soft, damp cloth. A mild soap can be used if necessary. Rinse thoroughly with a clean, damp cloth to remove any soap residue.
4. Avoid Abrasives: Do not use abrasive cleaners, brushes, or harsh chemicals, as these can damage the unit's finish.
5. Dry Thoroughly: Allow the foot bath to air dry completely before storing.
6. Storage: Store the unit in a cool, dry place, away from direct sunlight and out of reach of children. Do not wrap the power cord tightly around the unit.

Troubleshooting

Specifications

• Model Number: 61360 (also referred to as U-BB-2680)
• ASIN: B0006PS45C
• UPC: 078729613603
• Dimensions: Approximately 37.08 x 16.76 x 30.73 cm (14.6 x 6.6 x 12.1 inches)
• Weight: Approximately 3.05 kg (6.72 lbs)
• Manufacturer: HOT SPA (Brand: Hot Tools)
• Power: Standard household electrical outlet (refer to unit label for specific voltage/wattage)

Warranty and Support

This product is covered by a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, replacement parts, or warranty claims, please contact the manufacturer's customer service department. Keep your purchase receipt as proof of purchase.