Tamiya Acrylic XF26 Deep Green 23ml Bottle Instruction Manual

Introduction

Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or airbrushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly, and can be blended easily. This manual provides instructions for the proper use and care of your Tamiya Acrylic XF26 Deep Green paint.

Safety Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always use in a well-ventilated area and follow all safety precautions. Keep out of reach of small children. Recommended for ages 8 and up.

Setup

Before use, ensure the paint is thoroughly mixed. Gently shake the bottle or stir the paint with a clean stirrer until a consistent color and texture are achieved. Prepare your painting surface by ensuring it is clean, dry, and free of dust or oils.

Image: A 23ml bottle of Tamiya Acrylic XF26 Deep Green paint. The bottle has a white cap and a label indicating the color and brand. This image shows the product in its original packaging.

Operating Instructions

Brush Painting

Apply the paint directly to your model using a suitable brush. For best results, apply thin, even coats. Allow each coat to dry completely before applying the next. The paint dries quickly, allowing for efficient layering.

Airbrushing

When airbrushing, it is essential to thin the paint to achieve the correct consistency for your equipment. Use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077. Start with a thinning ratio of approximately 1 part paint to 1-2 parts thinner, and adjust as needed for optimal flow and coverage with your airbrush setup. Always ensure proper ventilation when airbrushing.

Maintenance

Cleaning Tools

Clean brushes and airbrush equipment immediately after use with water or Tamiya X-20A Acrylic Thinner. Do not allow paint to dry on tools, as this can make cleaning difficult and damage equipment.

Storage

Store the paint bottle in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is tightly sealed after each use to prevent the paint from drying out and to maintain its quality.

Troubleshooting

Paint Too Thick / Clogging Airbrush

If the paint appears too thick or clogs the airbrush, increase the thinning ratio slightly. Ensure the paint is thoroughly mixed before thinning and that your airbrush nozzle is clean.

Poor Coverage

For better coverage, apply multiple thin coats rather than one thick coat. Ensure the surface is clean and properly prepared. Adjust thinning ratio if paint is too thin.

Specifications

Warranty and Support

For specific warranty information or product support, please refer to the official Tamiya website or contact their customer service directly. Keep your purchase receipt for any warranty claims. Tamiya products are known for their quality and reliability.