Bush Furniture WC57460

Download PDF
Contents

Bush Business Furniture Series A 60W Desk User Manual

Model: WC57460

Introduction

Thank you for choosing the Bush Business Furniture Series A 60W Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read these instructions thoroughly before beginning assembly and retain them for future reference.

The Series A 60W Desk is designed for commercial quality and durability, featuring a thermally fused laminate surface and a comfortable C-leg design. It includes a comprehensive wire management system to help keep your workspace organized.

Bush Business Furniture Series A 60W Desk in an office setting with two monitors.

Figure 1: The Bush Business Furniture Series A 60W Desk in a modern office environment, demonstrating its spacious work surface and clean design.

Safety Information

  • Ensure the desk is properly anchored to the wall for maximum stability, if applicable.
  • This desk meets ANSI/BIFMA quality test standards for performance and safety.
  • Always follow assembly instructions carefully to prevent injury or damage.
  • Do not overload the desk. The maximum weight recommendation is 200 pounds.
  • Keep small parts away from children during assembly.
  • Use caution when moving the assembled desk due to its weight (91 pounds).

Package Contents

Before beginning assembly, verify that all components are present and undamaged. Refer to the detailed parts list included in your physical instruction manual for specific item counts and identification.

  • Desk Top Panel (Natural Cherry)
  • Side Panels / Legs (Slate)
  • Privacy Panel (Slate)
  • Wire Management Grommets
  • Adjustable Levelers/Feet
  • Assembly Hardware (screws, dowels, cam locks, etc.)
Diagram showing desk components: top panel, privacy panel, legs, wire management grommets, and commercial quality construction.

Figure 2: Exploded view diagram illustrating the main components of the Bush Business Furniture Series A 60W Desk, highlighting the thermally fused laminate finish, built-in wire management grommets, finished privacy panel, and commercial quality construction.

Setup and Assembly

Assembly of the Bush Business Furniture Series A 60W Desk requires two people and typically takes approximately 30-60 minutes. A detailed instruction manual is included with your purchase. Please refer to this manual for step-by-step visual guides and specific hardware identification.

  1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
  2. Identify Hardware: Match all hardware to the parts list provided in your manual.
  3. Assemble Base Structure: Follow the instructions to connect the side panels and privacy panel.
  4. Attach Desk Top: Securely fasten the desk top to the assembled base.
  5. Install Grommets and Levelers: Insert the wire management grommets into the pre-drilled holes and attach the adjustable levelers to the bottom of the desk legs.
  6. Final Placement: Position the desk in its desired location. Adjust the levelers to ensure stability on uneven floors.

For assembly assistance, please call consumer service at 800-950-4782.

Bush Business Furniture Series A 60W Desk in Natural Cherry and Slate, front view.

Figure 3: The assembled Bush Business Furniture Series A 60W Desk, showcasing its Natural Cherry top and Slate gray base.

Operating Instructions

The Bush Business Furniture Series A 60W Desk is designed for daily use in home or commercial office environments. Its features are intended to enhance productivity and organization.

Wire Management System

The desk is equipped with built-in wire management grommets on the desktop and a channel on the modesty panel. Use these features to route and organize power cords and data cables, keeping your workspace tidy and free from clutter.

Close-up of a wire management grommet on the desk surface with a cable passing through.

Figure 4: Detail of the wire management grommet, demonstrating how cables can be neatly routed through the desktop.

C-Leg Design

The open C-leg design provides ample legroom, allowing for comfortable seating and movement beneath the desk. This design also facilitates easy placement of office chairs and mobile storage units.

Adjustable Levelers

The desk feet are equipped with adjustable levelers. Rotate these levelers to compensate for uneven floor surfaces, ensuring the desk remains stable and level at all times.

Close-up of an adjustable desk foot leveler.

Figure 5: Detail of the adjustable foot leveler, which can be rotated to stabilize the desk on uneven floors.

Maintenance

Proper care and maintenance will extend the life and appearance of your Bush Business Furniture Series A 60W Desk.

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the thermally fused laminate finish.
  • Spills: Clean up spills immediately to prevent staining or damage to the laminate.
  • Protection: Use coasters under beverages and desk pads under writing instruments or sharp objects to protect the surface from scratches and heat.
  • Hardware Check: Periodically check all assembly hardware to ensure it remains tight. Retighten as necessary.

Troubleshooting

ProblemPossible CauseSolution
Desk is wobbly or unstable.Uneven floor surface; loose assembly hardware.Adjust the levelers on the bottom of the desk legs. Check and tighten all assembly screws and cam locks.
Missing or damaged parts upon delivery.Shipping damage; packaging error.Contact Bush Furniture customer service immediately at 800-950-4782 with your purchase details. Do not attempt to assemble with missing or damaged parts.
Difficulty during assembly.Misinterpretation of instructions; incorrect part orientation.Review the included instruction manual carefully. Ensure parts are oriented correctly. If issues persist, contact customer service.

Specifications

FeatureDetail
Model NumberWC57460
BrandBush Furniture
Product Dimensions (D x W x H)26.87"D x 59.62"W x 29.87"H
Item Weight91 Pounds
ColorNatural Cherry (top), Slate (base)
Top Material TypeEngineered Wood with Thermally Fused Laminate
Base MaterialEngineered Wood
Desk DesignComputer Desk / Office Desk
Leg StyleC-Leg
Maximum Weight Recommendation200 Pounds
Required AssemblyYes (Recommended 2 people)
CertificationsMeets ANSI/BIFMA quality test standards
Manufacturer Warranty10-year Limited

Warranty and Support

Manufacturer's Warranty: The Bush Business Furniture Series A 60W Desk is backed by a 10-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

For detailed warranty information, claims, or assembly assistance, please contact Bush Furniture customer service:

  • Phone: 800-950-4782
  • Online: Visit the official Bush Furniture website for support resources and contact forms.

Please have your model number (WC57460) and proof of purchase available when contacting support.

© 2023 Bush Furniture. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.