Salter 433 SVDR

Download PDF
Contents

Salter 433 SVDR Mechanical Bathroom Scale Instruction Manual

This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your Salter 433 SVDR Mechanical Bathroom Scale.

Product Overview

The Salter 433 SVDR Mechanical Bathroom Scale is designed for reliable body weight measurement. It features a large platform with a non-slip mat for stability and an easy-to-read rotating dial. This mechanical scale requires no batteries, offering a straightforward and low-maintenance weighing solution.

Key Features:

  • Capacity: Measures up to 120 KG (approximately 264 lbs or 19 Stone).
  • Display: Large, easy-to-read analog dial with clear numbers.
  • Platform: Features a non-slip rubberized surface for enhanced stability and safety.
  • Power: Operates without batteries, ensuring consistent readiness for use.
Salter 433 SVDR Mechanical Bathroom Scale, top view

Image: Top view of the Salter 433 SVDR Mechanical Bathroom Scale, showing the large dial and textured platform.

Setup

Follow these steps to prepare your scale for first use:

  1. Unpacking: Carefully remove the scale from its packaging.
  2. Placement: Place the scale on a firm, flat, and level surface. Avoid carpets or uneven flooring, as this can affect measurement accuracy.
  3. Zero Adjustment: Before each use, ensure the pointer on the dial is aligned precisely with the zero mark. If it is not, locate the small adjustment knob (typically found near the dial or on the side/bottom of the scale) and rotate it until the pointer rests exactly on zero.
Salter 433 SVDR Mechanical Bathroom Scale in a bathroom setting

Image: The Salter mechanical scale placed on a tiled bathroom floor, illustrating proper placement.

Operating Instructions

For accurate and consistent weight readings, adhere to the following procedure:

  1. Verify Zero: Always check that the scale's pointer is set to zero before stepping on. Adjust if necessary using the zero adjustment knob.
  2. Step On: Step onto the center of the scale platform with both feet evenly spaced. Stand still and maintain a balanced posture.
  3. Read Weight: Wait for the dial to stabilize completely. Read your weight from the dial. The scale displays measurements in both kilograms (KG) and stones/pounds (st/lbs).
  4. Consistent Measurement: For tracking purposes, it is recommended to weigh yourself at the same time of day, ideally in the morning before breakfast and after using the restroom.
Person standing on Salter 433 SVDR Mechanical Bathroom Scale

Image: A person's feet on the Salter mechanical scale, demonstrating proper standing position for weighing.

Maintenance

Proper care will ensure the longevity and accuracy of your scale:

  • Cleaning: Wipe the scale's surface with a damp cloth. Do not use abrasive cleaners, harsh chemicals, or immerse the scale in water.
  • Storage: Store the scale in a dry environment. Avoid exposure to extreme temperatures or high humidity.
  • Handling: Handle the scale gently. Frequent or rough movement may cause the internal mechanism to shift, potentially affecting accuracy and requiring re-calibration.
  • Intended Use: This scale is designed for personal household use only. It is not intended for commercial or medical purposes.
Salter 433 SVDR Mechanical Bathroom Scale stored in a cabinet

Image: The Salter mechanical scale stored vertically on a shelf in a bathroom cabinet, demonstrating compact storage.

Troubleshooting

ProblemPossible CauseSolution
Inaccurate reading or pointer not at zero.Scale is on an uneven surface, or the pointer has shifted due to movement or transport.Ensure the scale is placed on a firm, flat, and level surface. Use the zero adjustment knob to reset the pointer to zero before each use.
Fluctuating readings.User movement during weighing, or scale not on a stable surface.Stand still and centered on the scale. Confirm the scale is on a stable, hard floor, not carpet or soft surfaces.

Specifications

  • Model Number: 433 SVDR
  • Brand: Salter
  • Type: Mechanical Bathroom Scale
  • Maximum Capacity: 120 KG / 264 lbs (approx. 19 Stone)
  • Display Type: Analog Dial
  • Power Source: No batteries required
  • Product Dimensions: 9.96 x 1.81 x 9.84 inches
  • Item Weight: 2.87 Pounds
  • Color: Silver

Warranty and Support

This Salter Mechanical Bathroom Scale is covered by a 15-year guarantee, as indicated on the product packaging. For warranty claims, product support, or any inquiries regarding your scale, please contact Salter customer service directly. Refer to the official Salter website or the product packaging for specific contact details and detailed warranty terms.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.