ButtKicker BK-CMAK Couch/Chair Mounting Accessory Kit

Introduction

The ButtKicker BK-CMAK Couch/Chair Mounting Accessory Kit is designed to simplify the installation of your ButtKicker LFE low-frequency effects unit. This kit enables fast and easy setup of the ButtKicker LFE to various types of furniture, ensuring optimal performance by effectively isolating vibrations and preventing unwanted transfer to the floor.

Safety Information

Always ensure furniture is stable and secure before use. Do not install on unstable or wobbly furniture. Always follow the installation instructions carefully to avoid any accidents. Improper installation may lead to reduced performance or damage to the unit or furniture.

What's in the Box

The ButtKicker BK-CMAK kit includes all necessary components for installation:

• Mounting plate with pre-attached rubber isolators
• Five (5) additional rubber isolators
• Mounting hardware (screws, nuts, washers)
• One (1) handy wrench

This image displays all components of the ButtKicker BK-CMAK kit. It features a black, curved mounting plate with circular cutouts, five black cylindrical rubber isolators, various screws, nuts, and washers, and a small silver wrench. These parts are essential for securely attaching the ButtKicker LFE to furniture and optimizing its performance.

Setup

Follow these steps to properly install your ButtKicker BK-CMAK kit:

1. Prepare the Mounting Plate: The solid mounting plate has two halves. One half is designed for attaching the ButtKicker LFE unit (sold separately). Secure your ButtKicker LFE to this half using the provided screws and nuts.
2. Attach to Furniture Leg: The second half of the mounting plate is designed to attach to a leg on the back of your couch, chair, or other piece of furniture. Position the plate securely against the furniture leg and fasten it using the appropriate mounting hardware. The plate sits on its own pre-attached rubber isolators to prevent vibration transfer to the floor.
3. Install Additional Isolators: The kit includes five additional rubber isolators. These should be mounted on the other legs of your furniture. This step is crucial for drastically improving the performance of your ButtKicker LFE by further reducing vibration transmission to your floor and ensuring the vibrations are directed into the furniture itself.
4. Tighten Connections: Use the included wrench to ensure all screws and nuts are securely tightened. Do not overtighten, but ensure there is no wobble.
5. Test System: Once installed, test your ButtKicker LFE system to ensure proper function and optimal tactile feedback.

Operating

The ButtKicker BK-CMAK kit is a passive accessory designed to optimize the performance of your ButtKicker LFE unit. Once properly installed, it works by:

• Vibration Isolation: The rubber isolators on the mounting plate and the additional isolators for other furniture legs prevent the low-frequency vibrations generated by the ButtKicker LFE from being absorbed by the floor. This ensures that the energy is primarily transferred into the furniture, maximizing the tactile experience.
• Enhanced Tactile Feedback: By isolating the furniture from the floor, the kit allows the ButtKicker LFE to deliver more precise and impactful low-frequency effects directly to the user sitting on the furniture.

No specific operational steps are required for the kit itself beyond its initial installation.

Maintenance

To ensure the longevity and continued performance of your ButtKicker BK-CMAK kit, follow these simple maintenance guidelines:

• Cleaning: Wipe clean the mounting plate and isolators with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Regular Inspection: Periodically check all mounting hardware to ensure screws and nuts remain tight. Over time, vibrations can cause fasteners to loosen.
• Isolator Condition: Inspect the rubber isolators for any signs of wear, cracking, or degradation. While durable, extreme conditions or prolonged use might affect their integrity. Replace if necessary to maintain optimal vibration isolation.

Troubleshooting

If you experience issues with your ButtKicker LFE system after installing the BK-CMAK kit, consider the following:

• Rattling Noise: If you hear rattling, especially at higher output levels, ensure all mounting hardware is securely tightened. Check that the ButtKicker LFE unit is firmly attached to the mounting plate and that the plate is stable on the furniture leg. Ensure all five additional isolators are correctly installed on the other furniture legs. Rattling can occur if the furniture is too lightweight for the ButtKicker LFE and the kit, or if there's insufficient decoupling from the floor.
• Weak Effects: If the tactile effects feel weak, verify that all rubber isolators are properly in place and functioning. Missing or damaged isolators can allow vibrations to escape into the floor, reducing the intensity felt in the furniture. Ensure the furniture itself is not too heavy or rigid to effectively transfer vibrations.
• Compatibility: This kit is specifically designed for the ButtKicker LFE. Ensure you are using the correct ButtKicker model with this accessory.

Specifications

Warranty and Support

For specific warranty information and technical support regarding your ButtKicker BK-CMAK Couch/Chair Mounting Accessory Kit, please refer to the documentation provided with your original purchase or visit the official Buttkicker website. You may also contact Buttkicker customer service directly for assistance with product inquiries, troubleshooting, or replacement parts.