1. Introduction and Overview
The Winegard DS-2000 is a versatile 22-inch pipe mount designed for securing off-air TV antennas. Its robust construction and E-coat finish ensure maximum weather protection, making it suitable for various outdoor conditions. This mount can be adapted for multiple installation scenarios, including existing poles, roofs, attics, or sidewalls.
Key features include:
- Quick and economical mounting solution for compact off-air antennas.
- 22-inch pipe with E-coat finish for superior weather resistance.
- Includes two 2-inch U-bolts for adaptable pole installations.
- Can be used without U-bolts for roof, attic, or sidewall installations.
- Features a 1.5-inch diameter pipe for antenna attachment.
- Proudly Made in USA.
2. What's in the Box
Please verify that all components are present before beginning installation:
- 22 Inch J-Pipe
- Mounting Bracket
- Two 2 Inch U-Bolts
- Hardware (nuts, washers)
3. Setup and Installation
The DS-2000 mount offers flexible installation options. Always ensure the mounting surface is sturdy enough to support the mount and the antenna, especially in windy conditions.
3.1. Component Overview
Image: The main assembly of the Winegard DS-2000 mount, showing the curved 22-inch pipe attached to the flat mounting bracket.
3.2. Using U-Bolts for Pole/Tower Installation
For mounting to an existing pole or tower (1-inch to 2-inch diameter), use the included U-bolts. These allow for quick and secure attachment.
- Position the mounting bracket against the pole at the desired height.
- Place the U-bolts around the pole and through the designated holes in the mounting bracket.
- Secure the U-bolts with the provided nuts and washers. Tighten firmly to prevent movement.
Image: Two U-bolts with accompanying nuts and washers, used for securing the mount to a pole.
3.3. Roof, Attic, or Sidewall Installation
When installing on a flat surface such as a roof, attic beam, or sidewall, the U-bolts are not required. The mounting bracket has multiple pre-drilled holes for direct attachment using appropriate lag screws or bolts (not included, as fastener type depends on surface material).
- Select a suitable location that provides a clear line of sight for your antenna and is structurally sound.
- Mark the drilling points using the mounting bracket as a template.
- Drill pilot holes if necessary, according to the fastener manufacturer's recommendations.
- Attach the mounting bracket securely to the surface using appropriate weather-resistant fasteners.
3.4. Attaching the Antenna
The 22-inch pipe of the DS-2000 mount is designed to accommodate antennas with a 1.5-inch diameter mast. Insert your antenna's mast into the mount's pipe and secure it according to your antenna's instructions, typically using set screws or clamps.
Image: An example of an off-air TV antenna securely mounted onto the Winegard DS-2000 pipe.
4. Operating
Once installed, the Winegard DS-2000 mount provides a stable and secure platform for your antenna. No further operation is required from the mount itself. Ensure that your antenna is correctly aimed for optimal signal reception as per its own instruction manual.
5. Maintenance
The DS-2000 mount features an E-coat finish designed for maximum weather protection and durability. To ensure longevity:
- Periodically inspect the mount and all fasteners (U-bolts, screws) for tightness and stability, especially after severe weather conditions.
- Check for any signs of wear, corrosion, or damage to the E-coat finish.
- Clean the mount with a damp cloth if dirt or debris accumulates. Avoid abrasive cleaners that could damage the finish.
6. Troubleshooting
If you experience issues related to the mount's stability or antenna performance, consider the following:
- Antenna Instability: Verify that the mounting bracket is securely fastened to its surface (pole, roof, wall) and that the antenna's mast is tightly secured within the mount's pipe. Ensure all U-bolts or screws are adequately tightened.
- Poor Signal Reception: While the mount itself does not affect signal, an unstable mount can lead to antenna misalignment. Confirm the antenna is still correctly aimed and that no new obstructions have appeared.
- Corrosion/Damage: If the E-coat finish is compromised, minor rust spots may appear. Clean and apply a rust-inhibiting paint if necessary to prevent further degradation.
7. Specifications
- Brand: Winegard
- Model: DS-2000
- Color: Gray
- Pipe Diameter: 1.5 inches
- Pipe Length: 22 inches
- Mounting Type: Universal (Pole, Roof, Attic, Sidewall)
- Included Hardware: Two 2-inch U-bolts, Mounting Bracket, 22-inch J-Pipe
- Item Weight: Approximately 3.8 Pounds
- Manufacturer: Winegard Company
8. Warranty and Support
For warranty information and technical support regarding your Winegard DS-2000 mount, please contact the manufacturer directly. The Winegard Company can provide detailed assistance for product-specific inquiries.
Manufacturer: Winegard Company