Introduction
This manual provides instructions for the PlayStation 2 Vertical Stand, designed to securely hold your PlayStation 2 console in a vertical position. This stand helps optimize space within your entertainment system by allowing the console to stand upright.
Compatibility
This vertical stand is specifically designed for use with the PlayStation 2 SCPH-70000 Series consoles. Ensure your console model matches this series for proper fit and function.
Image: A PlayStation 2 console shown vertically oriented within the dedicated stand, demonstrating its intended use.
Setup and Installation
Follow these steps to properly install the vertical stand onto your PlayStation 2 console:
- Align the mounting screw on the stand with the corresponding threaded hole in the base of your PlayStation 2 console.
- Insert the screw into the console base.
- Use a coin to gently tighten the screw. Do not use a screwdriver, as this may overtighten or damage the screw or console.
Image: A diagram illustrating the process of attaching the vertical stand to the PlayStation 2 console. It shows the stand, the console base, and a coin being used to tighten the screw, along with a visual of the console in the stand.
Operating Instructions
Once installed, the stand allows your PlayStation 2 console to be placed vertically, saving space. Ensure the console is stable and not prone to tipping before and during use. Always place the console on a flat, stable surface.
Maintenance
Cleaning
To clean the stand, use a soft, dry cloth. Do not use solvents or other chemicals, as these may damage the finish or material of the stand.
Safety Precautions
- For safe operation, carefully read the instructions on this package and the PlayStation 2 console instruction manual before use.
- Use this stand exclusively with the SCPH-70000 series PlayStation 2 console.
- Do not place any other objects on the stand.
- Avoid exposing the stand to high temperatures, high humidity, or direct sunlight.
- Do not throw, drop, or subject the stand to strong physical shock.
- Design and specifications are subject to change without prior notice.
Product Specifications
- Model Number: 711719709404
- Product Dimensions: 8.5 x 1 x 5 inches
- Item Weight: 8 ounces
- Manufacturer: Sony Computer Entertainment
- Date First Available: October 4, 2004
Limitations of Liability
Other than as expressly set forth by Sony Computer Entertainment Inc. ("SCEI") and except to the extent prohibited by applicable laws, SCEI or its subsidiaries and affiliates shall not be liable for any damages, including special, incidental, indirect, or consequential damages, fees, or loss arising out of the use or inability to use this product.
