1. Introduction
This manual provides instructions for the proper installation, operation, and maintenance of your Coleman #295 Lantern Generator, Model 295-5891. This generator is designed as a replacement part for compatible Coleman lanterns, ensuring efficient fuel vaporization for consistent light output. Please read this manual thoroughly before attempting any installation or maintenance.
2. Safety Information
- Always ensure the lantern is completely cool and depressurized before attempting to replace the generator.
- Work in a well-ventilated area.
- Keep fuel and ignition sources away from the work area.
- Wear appropriate safety gear, such as gloves, to protect hands from sharp edges or fuel residue.
- Use only genuine Coleman replacement parts to ensure compatibility and safe operation.
- Dispose of old parts responsibly according to local regulations.
3. Parts Overview
The Coleman #295 Lantern Generator (Model 295-5891) is a critical component responsible for vaporizing liquid fuel into a gaseous state, which is then mixed with air and ignited to produce light. It typically consists of a tube, a cleaning needle, and a tip.
Image 1: Coleman #295 Lantern Generator. This image displays the replacement generator, a slender metallic component designed for Coleman #295 lanterns. It is the primary part responsible for fuel vaporization.
4. Installation Instructions
Follow these steps to replace the generator on your Coleman #295 lantern:
- Prepare the Lantern: Ensure the lantern is completely cool, turned off, and depressurized. Remove the ventilator, globe, and mantles to access the generator.
- Remove Old Generator: Locate the generator, which is typically a thin tube extending from the valve assembly. Using an appropriate wrench, carefully unscrew the old generator from the valve. Be mindful of any small parts, such as the cleaning needle, that may come out with it.
- Inspect and Clean: Briefly inspect the valve assembly opening for any debris. Clean if necessary.
- Install New Generator: Carefully insert the new Coleman #295 Lantern Generator into the valve assembly. Ensure the cleaning needle (if separate) is properly aligned. Hand-tighten the generator, then use a wrench to gently tighten it until snug. Do not overtighten, as this can damage the threads.
- Reassemble Lantern: Reattach the mantles, globe, and ventilator. Ensure all components are securely in place.
- Test for Leaks: Before lighting, pump the lantern to pressurize it and check for any fuel leaks around the new generator connection. If leaks are detected, depressurize, tighten the generator slightly, and re-test.
5. Operating Principles
The generator's function is integral to the lantern's operation. Once installed, when the lantern is pressurized and the fuel valve is opened, liquid fuel flows into the generator. The heat from the burning mantles (after initial preheating) heats the generator, causing the liquid fuel inside to vaporize. This fuel vapor then exits through a small orifice at the tip of the generator, mixes with air, and travels to the mantles where it ignites, producing light. The cleaning needle, operated by the lantern's control knob, helps clear any carbon buildup from the generator tip to maintain optimal fuel flow.
6. Maintenance
Proper maintenance of the generator ensures reliable lantern performance:
- Regular Cleaning: The generator's cleaning needle should be operated periodically by turning the lantern's control knob fully clockwise and then counter-clockwise a few times. This helps dislodge carbon deposits from the tip.
- Fuel Quality: Always use clean, fresh Coleman Liquid Fuel or unleaded gasoline (if your lantern is designed for dual fuel). Contaminated or old fuel can lead to generator clogging.
- Inspection: If your lantern exhibits dimming, pulsing, or difficulty lighting, inspect the generator for signs of clogging or damage. A generator that is heavily carbonized or bent will require replacement.
- Storage: When storing the lantern for extended periods, it is recommended to run it dry of fuel or use a fuel stabilizer to prevent gumming in the generator and fuel system.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lantern is dim or flickers | Clogged generator tip or tube | Operate cleaning needle. If problem persists, replace generator. |
| Lantern pulses or surges | Partially clogged generator or insufficient fuel vaporization | Ensure adequate preheating. Operate cleaning needle. Replace generator if necessary. |
| Fuel leaks around generator connection | Loose generator or damaged threads/seal | Depressurize lantern and gently tighten generator. If leak persists, inspect threads and consider replacing the generator or valve assembly if damaged. |
| Lantern won't light | Completely clogged generator, no fuel, or no pressure | Check fuel level and pump pressure. Operate cleaning needle. If still no light, replace generator. |
8. Specifications
- Brand: Coleman
- Model Number: 295-5891
- Item Type Name: #295 Lantern Generator
- Material: Composite
- UPC: 076501202502
- Compatible Lanterns: Designed for Coleman #295 series lanterns.
9. Warranty and Support
Warranty information for the Coleman #295 Lantern Generator is typically provided on the product packaging or can be found on the official Coleman website. For specific warranty details or technical support, please refer to the manufacturer's official resources or contact Coleman customer service directly.
Coleman Customer Service: For assistance, please visit the official Coleman website or refer to the contact information provided with your original lantern purchase.
