1. Introduction
This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your Lexmark P315 Snapshot Photo Inkjet Printer. Please read these instructions carefully to ensure proper use and to maximize the performance and longevity of your device.
2. Safety Information
Observe the following safety precautions to prevent injury or damage to the printer:
- Do not place the printer in an unstable location.
- Do not expose the printer to water or moisture.
- Use only the power adapter supplied with the printer.
- Keep the printer away from heat sources and direct sunlight.
- Do not attempt to service the printer yourself. Refer all servicing to qualified personnel.
3. Package Contents
Verify that all items are present in the package:
- Lexmark P315 Snapshot Photo Inkjet Printer
- Power Adapter and Cord
- Tricolor Ink Cartridge
- Documentation (User Guide, Setup Poster)
4. Printer Overview
Familiarize yourself with the main components of your Lexmark P315 printer.

Figure 4.1: Front view of the Lexmark P315 printer. This image displays the printer's compact design, the flip-up 2.5-inch preview screen on the left, the control panel with navigation buttons and power button, and the paper output tray. The Lexmark logo is prominently displayed on the front.
4.1 Control Panel
The control panel, located to the right of the preview screen, includes buttons for navigation, rotation, number of prints, and starting/stopping print jobs. The power button is also located here.
4.2 Memory Card Slots and PictBridge Port
The front of the printer features multiple memory card slots and a PictBridge-compatible USB port for direct printing.

Figure 4.2: Close-up view of the memory card slots and PictBridge port on the Lexmark P315 printer. This image highlights the various slots for different memory card types (CompactFlash, Memory Stick, SD, etc.) and the USB port for direct camera connection, enabling PC-free photo printing.
5. Setup
5.1 Unpacking
- Remove the printer from its packaging.
- Remove all protective tapes and packing materials from the printer.
5.2 Power Connection
- Connect the power adapter to the printer's power input.
- Plug the power cord into a wall outlet.
- Press the power button to turn on the printer.
5.3 Ink Cartridge Installation
Install the tricolor ink cartridge as follows:
- Open the printer's top cover to access the cartridge bay.
- Remove the new ink cartridge from its packaging and carefully remove any protective tape.
- Insert the cartridge into the designated slot until it clicks into place.
- Close the printer's top cover.

Figure 5.1: The Lexmark P315 printer with its top cover open, revealing the internal ink cartridge bay. A tricolor ink cartridge is shown partially inserted, illustrating the process of installation. The preview screen displays an instruction to 'Change Cartridge' and 'Remove tape'.
5.4 Loading Paper
- Extend the paper input tray at the rear of the printer.
- Load photo paper into the input tray, ensuring the print side is facing up.
- Adjust the paper guides to fit the width of the paper. The printer supports 4x6 inch photo paper.
6. Operating the Printer
6.1 Printing from Memory Cards
The Lexmark P315 supports various memory card types including CompactFlash Type I & II, Memory Stick, Memory Stick Pro, Memory Stick Duo (with adapter), Multi Media, Secure Digital, SmartMedia, Microdrive, and xD cards.
- Insert a compatible memory card into the appropriate slot on the front of the printer.
- The preview screen will display the images on the card.
- Use the navigation buttons to browse through images.
- Select the desired image(s) and adjust print settings (e.g., number of copies, rotation) using the control panel.
- Press the 'Start' button to begin printing.
6.2 Printing from a PictBridge Camera
The printer is compatible with PictBridge-enabled digital cameras for direct printing.
- Connect your PictBridge-compatible digital camera directly to the PictBridge USB port on the front of the printer using a USB cable.
- Follow the instructions on your camera's screen or the printer's preview screen to select and print images.
6.3 Using the Preview Screen
The 2.5-inch (63.5mm) color screen allows you to preview images before printing. Use the navigation buttons on the control panel to scroll through photos, zoom in, or rotate images as needed.
6.4 Basic Printing Steps
- Ensure the printer is powered on and has paper loaded.
- Insert a memory card or connect a PictBridge camera.
- Select the image(s) you wish to print using the preview screen and control panel.
- Confirm print settings (e.g., quantity).
- Press the 'Start' button to initiate the print job.
7. Maintenance
7.1 Replacing Ink Cartridges
When print quality degrades or the printer indicates a low ink level, replace the tricolor ink cartridge. Refer to Section 5.3 for installation steps. Use genuine Lexmark ink cartridges for optimal performance.
7.2 Cleaning the Printer
Periodically clean the exterior of the printer with a soft, damp cloth. Do not use abrasive cleaners or solvents. For internal cleaning, refer to the printer's on-screen prompts or contact support if print quality issues persist after cartridge replacement.
8. Troubleshooting
If you encounter issues with your Lexmark P315 printer, refer to the following common problems and solutions:
- Printer Not Responding: Ensure the power cord is securely connected and the printer is turned on. Check for any error messages on the preview screen.
- Poor Print Quality: Verify that the ink cartridge is properly installed and not empty. Replace the cartridge if necessary. Ensure you are using appropriate photo paper.
- Memory Card Not Detected: Ensure the memory card is fully inserted into the correct slot. Check that the card is compatible with the printer (refer to Section 6.1). Try reinserting the card or using a different card.
- Paper Jams: Carefully open the printer covers and remove any jammed paper, pulling gently in the direction of the paper path. Ensure paper is loaded correctly and not overfilled in the input tray.
- PictBridge Connection Issues: Ensure your camera is PictBridge compatible and the USB cable is securely connected to both the camera and the printer.
9. Specifications
| Feature | Value |
|---|---|
| Model Name | P315 |
| Item Model Number | 20C0000 |
| Printing Technology | Inkjet |
| Printer Output | Color |
| Maximum Print Speed (Color) | 4.00 pages per minute |
| Max Printspeed Monochrome | 32.00 pages per minute |
| Max Copy Resolution Color | 4800 dpi |
| Printer Resolution Color Vertical Max | 4800 dpi |
| Special Feature | Portable |
| Connectivity Technology | USB, Wireless (Note: Wireless functionality may require additional accessories or specific setup not detailed here) |
| Hardware Interface | CompactFlash Type I, Memory Stick, Memory Stick Duo, Memory Stick PRO, PictBridge, Secure Digital Card |
| Compatible Devices | Camera, PC |
| Max Input Sheet Capacity | 25 sheets |
| Output Sheet Capacity | 25 sheets |
| Sheet Size | 4 inches (4x6 photo paper) |
| Item Weight | 7 pounds |
| Product Dimensions | 8.31 x 10.79 x 5.59 inches |
| Memory Storage Capacity | 64 MB |
| Control Method | Touch (via control panel buttons) |
| Date First Available | September 18, 2004 |
10. Warranty and Support
The Lexmark P315 Snapshot Photo Inkjet Printer comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Lexmark support website. For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, contact Lexmark customer support.