FELCO C7 Swiss Made Cable Cutters Instruction Manual

1. Introduction

Thank you for choosing the FELCO C7 Swiss Made Cable Cutters. This manual provides essential information for the safe and effective use, maintenance, and care of your tool. The FELCO C7 is designed for precise and clean cuts on various cables, featuring a unique triangular cutting system and durable hardened steel blades.

Image 1: The FELCO C7 Cable Cutters in a closed position, highlighting the red handles and precision-engineered blades.

2. Important Safety Information

Please read and understand all safety instructions before using the FELCO C7 Cable Cutters. Failure to follow these instructions may result in injury or damage to the tool.

• Personal Safety: Always wear appropriate personal protective equipment, such as safety glasses, when operating the tool.
• Intended Use: This tool is designed for cutting cables and wires. Do not use it for purposes other than its intended use.
• Live Wires: DO NOT USE THIS TOOL TO CUT LIVE ELECTRIC CABLES OR WIRING. This can cause severe injury or death.
• Children: Keep out of reach of children. This is a sharp tool and poses a hazard.
• Storage: When not in use, keep the cutter closed and stored in a safe place to prevent accidental injury.
• Improper Use: Inappropriate use may result in physical injuries or damage to property.

3. Product Components

The FELCO C7 Cable Cutters consist of several key components designed for optimal performance and durability.

Image 2: An exploded diagram illustrating the main components of the FELCO C7 Cable Cutters, including the bolt, nut, buffer, and handles.

• Blades: High-quality hardened steel blades with a triangular cutting system.
• Handles (C7/35): Pressed steel handles with non-slip grips for comfortable and secure handling.
• Center Bolt (C7/4) & Nut (C7/5): Connects the two halves of the cutter, allowing for smooth pivot action.
• Thumb Catch: Designed for one-handed operation to lock and unlock the blades.
• Buffer (C7/10): A protective component that absorbs impact when the handles close.

4. Setup and Initial Inspection

Before first use, perform a quick inspection to ensure the tool is in optimal condition.

1. Unpacking: Carefully remove the cable cutters from their packaging.
2. Visual Check: Inspect the blades for any signs of damage, dullness, or misalignment. Ensure the handles are secure and the non-slip grips are intact.
3. Functionality Test: Open and close the cutters several times to ensure smooth operation of the pivot mechanism and the thumb catch.
4. Cleanliness: Wipe down the tool with a clean, dry cloth to remove any manufacturing residues.

5. Operating Instructions

The FELCO C7 is designed for efficient and clean cutting of various cables up to 7mm in diameter.

Image 3: A user demonstrating the proper grip for the FELCO C7 Cable Cutters, highlighting the ergonomic design.

1. Unlocking the Tool: Push the thumb catch forward with your thumb to release the blades. The cutters will spring open.
2. Positioning the Cable: Place the cable to be cut between the blades. Ensure the cable is positioned as close to the pivot point as possible for maximum leverage and a clean cut.
3. Cutting Action: Apply steady, firm pressure to the handles. The triangular cutting system will progressively cut through the cable, preventing fraying and squashing.
4. Suitable Applications: Ideal for bike brake lines, fencing wire, and various electrical cables (ensure they are de-energized).
5. Locking the Tool: After use, close the handles completely and engage the thumb catch to secure the blades in the closed position for safe storage.

Note: For optimal performance and tool longevity, avoid attempting to cut materials beyond the tool's capacity or materials not intended for these cutters, such as hardened steel rods or live electrical wires.

6. Maintenance and Care

Regular maintenance ensures the longevity and optimal performance of your FELCO C7 Cable Cutters.

Image 4: The FELCO C7 Cable Cutters shown in a closed and locked state, suitable for safe storage.

• Cleaning: After each use, clean the blades and pivot area with a dry cloth to remove any debris, dirt, or sap. For stubborn residue, use a mild solvent and then wipe dry.
• Lubrication: Periodically apply a few drops of light machine oil to the pivot bolt and blade surfaces to ensure smooth operation and prevent rust.
• Blade Sharpening: While FELCO blades are designed for durability, over time, they may require sharpening. Use a fine-grit sharpening stone at the original blade angle. If unsure, consult a professional.
• Storage: Store the cutters in a dry place, with the blades locked in the closed position, to protect them from moisture and accidental damage.
• Replacement Parts: Genuine FELCO replacement parts (e.g., blades, springs, bolts) are available to maintain your tool. Refer to the FELCO website for details.

7. Troubleshooting

If you encounter issues with your FELCO C7 Cable Cutters, refer to the following common problems and solutions:

8. Product Specifications

Detailed specifications for the FELCO C7 Swiss Made Cable Cutters.

Image 5: A visual representation of the FELCO C7 Cable Cutters with its key dimensions indicated.

• Model: FELCO C7
• Brand: FELCO
• Country of Origin: Switzerland
• Cutting Capacity: Up to 7mm diameter cables
• Blade Material: High-quality Hardened Pressed Steel
• Handle Material: Alloy Steel with Non-Slip Grips
• Color: Red/Black
• Product Dimensions: 7.48"L x 2.48"W
• Item Weight: 9.6 ounces
• Blade Edge: Straight
• UPC: 783929200019, 736791001666

9. Warranty and Support

For information regarding warranty coverage, product registration, or technical support, please refer to the official FELCO website or contact their customer service directly.

FELCO Official Website: www.felco.com