Introduction
This manual provides instructions for the safe and effective use of your Hubbell All-Weather 30-Inch 6 Grounded Outdoor Outlet Strip, Model FB3003. Please read all instructions carefully before installation and operation to ensure proper function and safety.
Safety Information
- Electrical Hazard: Always ensure the power strip is disconnected from the main power source before performing any installation, maintenance, or cleaning.
- Outdoor Use: This product is designed for outdoor use and features a weatherproof cover. Ensure the cover is properly closed when not in use or during adverse weather conditions to maintain its NEMA 3R rating.
- Overload Protection: The unit includes a 15 Amp resettable circuit breaker. Do not exceed the maximum load of 1800 watts. If the circuit breaker trips, reduce the connected load before resetting.
- Grounding: This power strip is grounded. Do not use with ungrounded outlets or adapters that defeat the grounding feature.
- Damage Inspection: Regularly inspect the power strip, cord, and plugs for any signs of damage. Do not use if damaged.
Setup
The Hubbell FB3003 is designed for versatile outdoor placement.
Image: The Hubbell FB3003 power strip mounted on a stake in a garden, demonstrating outdoor installation for powering landscape lighting.
- Unpacking: Carefully remove the power strip from its packaging. Retain packaging for future storage or transport.
- Mounting: Securely mount the power strip in a desired outdoor location. Ensure it is placed on a stable surface or mounted to a wall/stake using appropriate hardware (not included) to prevent accidental dislodgement.
- Power Connection: Plug the 30-inch heavy-duty cord into a grounded outdoor electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for added safety.
Operating
The FB3003 features six grounded outlets and a 3-position switch for convenient control.
Image: The Hubbell FB3003 power strip with several devices plugged into its outlets, demonstrating its use for powering outdoor decorations.
- Connecting Devices: Plug your outdoor electrical devices into the six available grounded outlets. Ensure the total wattage of all connected devices does not exceed 1800 watts (15 Amps).
- 3-Position Switch: The integrated switch controls the power to the outlets. Familiarize yourself with its positions:
- ON: Provides continuous power to all connected outlets.
- OFF: Cuts power to all connected outlets.
- TIMER: Activates the built-in timer function (if applicable to your specific model, refer to product packaging for timer details).
- Weatherproof Cover: When not in use, or during rain, snow, or other wet conditions, ensure the weatherproof cover is securely closed over the outlets and plugs to protect against moisture and debris.
Maintenance
Regular maintenance ensures the longevity and safe operation of your power strip.
Image: The Hubbell FB3003 power strip with its weatherproof cover securely closed, shown with a light layer of snow, highlighting its NEMA 3R rating.
- Cleaning: Disconnect the power strip from the main power source. Use a damp cloth to wipe down the exterior. Do not use abrasive cleaners or immerse the unit in water.
- Inspection: Periodically inspect the power strip, cord, and plugs for any signs of wear, cuts, fraying, or other damage. Check the weatherproof cover for cracks or deterioration.
- Storage: If storing the unit for an extended period, clean it thoroughly and store it in a dry, protected area.
Troubleshooting
- No Power to Outlets:
- Check if the power strip's 3-position switch is in the 'ON' position.
- Verify that the main power outlet is functioning.
- Check the resettable circuit breaker on the power strip. If it has tripped (button is popped out), disconnect some devices, then press the button to reset.
- Circuit Breaker Trips Repeatedly:
- The total wattage of connected devices exceeds the 1800-watt (15 Amp) limit. Reduce the number or power consumption of devices plugged into the strip.
- A connected device may be faulty and drawing excessive current. Disconnect devices one by one to identify the problematic unit.
Specifications
| Model Number | FB3003 |
| Brand | Hubbell |
| Total Power Outlets | 6 |
| Maximum Current | 15 Amps |
| Maximum Wattage | 1800 Watts |
| Cord Length | 30 inches |
| Weather Rating | NEMA 3R (for wet locations) |
| Plug Type | Type B |
Warranty
This Hubbell product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty information provided with your product packaging or contact Hubbell customer support.
Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Hubbell customer support. Keep your purchase receipt and model number (FB3003) readily available when contacting support.
