GEARWRENCH Drum Brake Adjusting Tool 287D User Manual
Model: 287D | Brand: GEARWRENCH
1. Product Overview
The GEARWRENCH Drum Brake Adjusting Tool 287D is designed for precise adjustment of drum brakes. This tool facilitates the proper spacing of brake shoes within the drum, which is crucial for effective braking performance and longevity of brake components. Its robust construction ensures durability and reliable operation in automotive maintenance tasks.
Image 1.1: The GEARWRENCH Drum Brake Adjusting Tool 287D, a sturdy metal tool with a bent shaft and flat ends for engaging brake adjusters.
2. Safety Information
- Always wear appropriate personal protective equipment, including safety glasses and gloves, when working on vehicle braking systems.
- Ensure the vehicle is securely supported on jack stands and the parking brake is engaged before beginning any work.
- Refer to the vehicle manufacturer's service manual for specific drum brake adjustment procedures and specifications.
- Keep hands and fingers clear of moving parts and pinch points during adjustment.
3. Setup
The GEARWRENCH Drum Brake Adjusting Tool 287D requires no assembly. Before use, inspect the tool for any signs of damage or wear. Ensure the working ends are clean and free of debris to prevent damage to brake components.
Image 3.1: A close-up view of the GEARWRENCH Drum Brake Adjusting Tool 287D, highlighting its sturdy construction and the angled tip designed for brake adjusters.
4. Operating Instructions
This tool is specifically designed to engage and turn the star wheel adjuster found in many drum brake systems. The angled design allows for access through the backing plate or inspection holes.
- Prepare the Vehicle: Lift the vehicle and secure it on jack stands. Remove the wheel and tire assembly. Depending on the vehicle, you may need to remove the brake drum to access the adjuster, or access it through an adjustment hole in the backing plate.
- Locate the Adjuster: Identify the star wheel adjuster mechanism. This is typically located at the bottom of the brake shoe assembly.
- Engage the Tool: Insert the angled end of the GEARWRENCH 287D tool into the adjustment hole or directly onto the star wheel. The flat tip is designed to securely grip the teeth of the star wheel.
- Adjust the Brake: Rotate the tool to turn the star wheel. Turning the star wheel in one direction will expand the brake shoes, while turning it in the opposite direction will retract them. Adjust until a slight drag is felt when rotating the drum by hand, then back off slightly until the drum rotates freely with minimal drag.
- Verify Adjustment: Reinstall the brake drum (if removed) and wheel. Test the brake pedal feel and ensure proper braking function before driving the vehicle.
Image 4.1: A hand using the GEARWRENCH Drum Brake Adjusting Tool 287D to adjust a drum brake mechanism through an access hole on a vehicle's backing plate.
5. Maintenance and Care
- After each use, clean the tool with a dry cloth to remove any grease, dirt, or brake dust.
- Store the tool in a dry environment to prevent rust and corrosion.
- Avoid using the tool as a pry bar or for purposes other than its intended design, as this can cause damage.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | 287D |
| Brand | GEARWRENCH |
| Item Weight | 3.19 ounces |
| Product Dimensions | 5.51 x 1.57 x 5.51 inches |
| Power Source | Hand Powered |
| Country Of Origin | Taiwan, Province Of China |
7. Warranty Information
GEARWRENCH tools are manufactured to high standards and are designed for durability. For specific warranty details regarding the 287D Drum Brake Adjusting Tool, please refer to the official GEARWRENCH warranty policy available on their website or contact customer support.
8. Customer Support
For further assistance, technical support, or inquiries regarding the GEARWRENCH Drum Brake Adjusting Tool 287D, please visit the official GEARWRENCH website or contact their customer service department. You can find more information and products at the GEARWRENCH Store on Amazon.
