Kichler 6-Light Bathroom Vanity Light (Model 626NI) - Instruction Manual

Product Overview

The Kichler 6-Light Bathroom Vanity Light, Model 626NI, is a 36-inch wide bath bar featuring a Brushed Nickel finish. This fixture is designed for everyday use in bathrooms and powder rooms, specifically for installation over a mirror. It requires six G25 medium base incandescent bulbs (not included) with a maximum wattage of 60 watts per bulb. The fixture is equipped for outlet box or conduit connection and can be installed without an electrical box while meeting UL and National Electric Code requirements. It is suitable for damp locations.

Image: Kichler 6-Light Bathroom Vanity Light in Brushed Nickel finish.

Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring.

• Read all instructions carefully before beginning installation.
• Ensure the electrical supply is turned off at the main circuit breaker or fuse box before handling the fixture.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
• If you are not familiar with electrical wiring, consult a qualified electrician.
• Use only the specified bulb type and wattage (60W G25 Med F Incand). Exceeding the maximum wattage may cause overheating.
• Do not install this fixture in locations where it may be directly exposed to water spray or submersion. It is suitable for damp locations only.

Package Contents

Verify that all components are present before beginning installation:

• Vanity Light Fixture
• Instruction Manual
• Mounting Hardware
• Shade (Note: Bulbs are not included and must be purchased separately)

Specifications

Image: Detailed dimensions of the Kichler 6-Light Bathroom Vanity Light, showing width, height, and depth.

Image: Bulb specifications including E26 medium base, A19 clear, and G25 white bulb shapes, along with dimming information.

Setup and Installation

Before starting, ensure the power is turned off at the circuit breaker. This fixture is designed for wall-mount installation and can be connected to an existing electrical box or conduit. Refer to the included instruction manual for detailed diagrams and specific wiring steps.

1. Prepare the Mounting Surface: Ensure the wall surface is clean and clear. The fixture is designed to be mounted over a mirror or in a suitable bathroom location.
2. Access Mounting Hardware: The mounting hardware and instructions are typically found inside the fixture. Carefully remove the socket cups or front plate to access them.
3. Install Mounting Bracket: Secure the mounting bracket to the wall outlet box using the provided screws. Ensure it is level and firmly attached.
4. Wire the Fixture: Connect the fixture's wires to the household electrical wires according to local electrical codes. Typically, this involves connecting the black wire from the fixture to the black (hot) wire from the wall, the white wire from the fixture to the white (neutral) wire from the wall, and the ground wire to the ground wire from the wall. Use appropriate wire connectors.
5. Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws or fasteners.
6. Install Bulbs: Insert six G25 medium base incandescent bulbs (max 60W each) into the sockets. Bulbs are not included.
7. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.

Image: Rear view of the vanity light, showing the backplate and wiring access points for installation.

Image: Guide for selecting vanity light size and placement, suggesting lights approximately 3/4 the width of the mirror and installed at eye level.

Installation Videos

Operating Instructions

This vanity light operates via a standard wall switch (not included). Once installed and powered, simply toggle the wall switch to turn the light fixture on or off.

• Ensure all six bulbs are securely screwed into their sockets.
• Use a compatible wall dimmer if you wish to utilize dimming functionality with dimmable light bulbs.

Maintenance

Regular maintenance will help preserve the appearance and functionality of your Kichler vanity light.

• Cleaning: To clean the fixture, ensure the power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Bulb Replacement: Before replacing bulbs, turn off the power to the fixture at the circuit breaker. Allow bulbs to cool completely. Unscrew old bulbs and replace with new G25 medium base incandescent bulbs, not exceeding 60 watts per bulb.
• Inspection: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.

Troubleshooting

If you encounter issues with your vanity light, refer to the following common troubleshooting steps:

Warranty Information

The Kichler 6-Light Bathroom Vanity Light (Model 626NI) comes with a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the official Kichler warranty documentation or contact Kichler customer support.

Customer Support

For further assistance, technical support, or to inquire about replacement parts, please contact Kichler customer service. You can typically find contact information on the Kichler website or through your product retailer.

Kichler Website: www.kichler.com