Jim Dunlop Formula 65 Ultra Glide String Conditioner User Manual

1. Introduction

Welcome to the Jim Dunlop Formula 65 Ultra Glide String Conditioner. This product is formulated to enhance the playability and longevity of your instrument strings by providing a smooth, clean surface and protecting against common wear and corrosion.

2. Setup

1. Preparation: Ensure your instrument is stable and accessible.
2. Shake Well: Before each use, shake the bottle thoroughly to ensure the formula is properly mixed.
3. Open Applicator: Remove the cap to expose the felt dauber applicator.

Figure 1: Jim Dunlop Formula 65 Ultra Glide String Conditioner bottle.

3. Operating Instructions

1. Apply to Strings: Gently press the felt dauber top onto a string. Dispense enough liquid to adequately moisten the dauber.
2. Glide Along Strings: Move the applicator along the length of each string, from the bridge to the tuning pegs, ensuring even coverage.
3. Allow to Penetrate: Allow the conditioner to sit on the strings for approximately one to two minutes.
4. Wipe Excess: Using a clean, dry microfiber cloth, gently wipe away any excess liquid from the strings. Ensure all strings are dry before playing.

Figure 2: Application of the string conditioner to a guitar string.

4. Maintenance (Product Care)

• Applicator Care: After use, ensure the felt dauber is clean and free of debris. If necessary, gently wipe the dauber with a clean cloth.
• Storage: Securely replace the cap after each use to prevent leakage and maintain product integrity. Store in a cool, dry place away from direct sunlight.

5. Troubleshooting

• String Breakage: Applying excessive pressure or liquid, or not wiping off excess, may contribute to premature string wear or breakage. Always apply gently and remove excess.
• Uneven Application: If strings feel sticky or uneven, ensure the dauber is adequately moistened and that excess liquid is thoroughly wiped off after application.
• Product Leakage: Ensure the cap is tightly secured after each use to prevent leakage.

6. Specifications

7. Warranty and Support

• Return Policy: This product is subject to a 30-day return policy for refund or replacement, as per Amazon's standard policy.
• Manufacturer Support: For further assistance or product inquiries, please contact Jim Dunlop customer support.