Oral-B EB417-3

Oral-B Dual Clean EB417-3 Electric Toothbrush Replacement Brush Heads User Manual

Brand: Oral-B | Model: EB417-3

Introduction

The Oral-B Dual Clean replacement toothbrush head is engineered to provide a superior clean through its dual-action design. This innovative technology incorporates oscillating bristles that effectively surround each tooth, facilitating a comprehensive, tooth-by-tooth cleaning experience. This design aims to deliver a more thorough cleaning compared to a regular manual toothbrush.

Key Features

  • Includes 3 Genuine Oral-B Dual Clean Electric Toothbrush Replacement Brush Heads.
  • Dual Action provides superior cleaning compared to a regular manual toothbrush.
  • Features two distinct, moving sections that work together for effective tooth cleaning.
  • Oral-B is recognized as the #1 Dentist Used Toothbrush Brand, Worldwide.
  • Compatible with most Oral-B rechargeable handles, excluding Oral-B Sonic and Oral-B iO toothbrushes.
Oral-B Dual Clean brush head demonstrating dual cleaning action on teeth

Image: The Oral-B Dual Clean brush head in action, illustrating its two distinct cleaning zones working simultaneously for enhanced plaque removal.

Close-up view of Oral-B Dual Clean brush head showing two cleaning zones

Image: A detailed view of the Oral-B Dual Clean brush head, highlighting its two specialized cleaning zones designed for superior plaque removal.

Setup and Installation

  1. Ensure your Oral-B electric toothbrush handle is turned off.
  2. Align the replacement brush head with the shaft of the toothbrush handle.
  3. Push the brush head down firmly until it clicks into place. A small gap between the brush head and the handle is normal.
  4. Before first use, rinse the brush head thoroughly under running water.

Video: An official Oral-B video demonstrating the features and proper attachment of the Dual Clean Replacement Toothbrush Head to a compatible Oral-B handle.

Operating Instructions

  1. Wet the brush head and apply a small amount of toothpaste.
  2. Place the brush head against your teeth at a slight angle, covering both the tooth surface and the gumline.
  3. Turn on your Oral-B electric toothbrush.
  4. Guide the brush head slowly from tooth to tooth, allowing the oscillating and pulsating movements to clean each tooth individually. Do not scrub aggressively.
  5. Brush each quadrant of your mouth (upper right, upper left, lower right, lower left) for approximately 30 seconds, for a total brushing time of 2 minutes. Many Oral-B handles have a built-in timer to assist with this.
  6. After brushing, turn off the toothbrush and rinse your mouth and the brush head thoroughly.

Maintenance and Care

  • After each use, rinse the brush head thoroughly under running water with the toothbrush handle turned on for a few seconds to remove any remaining toothpaste or debris.
  • Turn off the toothbrush handle and remove the brush head. Rinse both parts separately.
  • Allow the brush head to air dry before storing.
  • Replace the brush head every 3 months, or sooner if the bristles become worn or frayed. Worn bristles reduce cleaning effectiveness.
  • Do not use this product on children under the age of 3.
Oral-B Dual Clean brush head with a graphic indicating replacement every 3 months

Image: Visual reminder to change your Oral-B Dual Clean brush head every 3 months for optimal cleaning performance.

Compatibility

The Oral-B Dual Clean replacement brush heads are designed to fit a wide range of Oral-B rechargeable electric toothbrush handles. Please refer to the list below for compatibility details:

Compatible Devices:

  • All Oral-B rechargeable handles (excluding specific models listed below).

Does NOT Fit:

  • Oral-B Sonic toothbrushes
  • Oral-B iO toothbrushes
  • 3D White Battery models
  • Complete Battery models
  • Gum Care Battery models
Oral-B Dual Clean brush head shown with various compatible Oral-B electric toothbrush handles

Image: The Oral-B Dual Clean brush head displayed alongside several Oral-B electric toothbrush handles, illustrating its broad compatibility.

Troubleshooting

If you encounter any issues with your Oral-B Dual Clean replacement brush heads, consider the following common troubleshooting steps:

  • Brush Head Not Fitting: Ensure you have an Oral-B rechargeable handle that is not an iO or Sonic model. Apply firm, even pressure when attaching the head until it clicks.
  • Reduced Cleaning Performance: Check if the brush head is worn. Replace it every 3 months or sooner if bristles are splayed or discolored. Ensure the brush head is securely attached to the handle.
  • Unusual Noise or Vibration: Verify the brush head is correctly seated on the handle. If the issue persists, the handle or brush head may be damaged.
  • Bristle Discoloration: The blue indicator bristles fade halfway to signal when to replace your brush head. If they fade sooner, it may indicate aggressive brushing.

For further assistance, please refer to the support section or contact Oral-B customer service.

Specifications

Model NumberEB417-3
Product Dimensions2.36 x 8.66 x 0.71 inches
Item Weight0.81 ounces (23 g)
Brand NameOral-B
Age Range DescriptionAdult
Size3 count (Pack of 1)
Number of Pieces3
Unit Count3 Count
Material TypePlastic
Bristle MaterialNylon
Item Firmness DescriptionSoft
ColorWhite
Item FormROUND

Warranty and Support

For information regarding product warranty, returns, or technical support, please visit the official Oral-B website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.