Carrera GO!!! 61601 Extension Set 2 Instruction Manual

Introduction

The Carrera GO!!! 61601 Extension Set 2 is designed to expand and enhance your existing Carrera GO!!! 1:43 scale slot car race tracks. This set provides additional track pieces to create more complex and exciting layouts, offering increased play value and creative track building opportunities. It is compatible with all Carrera GO!!! sets, Carrera racing system battery-operated sets, and Digital 143 sets.

Safety Information

Caution - Electric Toy: This product is not recommended for children under 6 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock. Always supervise children during play.

Package Contents

The Carrera GO!!! 61601 Extension Set 2 includes the following components:

• 4 x Straights (13.46 inches each)
• 2 x Straights (4.48 inches each)
• 2 x Fly Over Incline Supports
• 1 x Narrow Section
• 2 x Lane Change Sections

Image: Overview of all track pieces included in the Carrera GO!!! 61601 Extension Set 2.

Image: A 13.46-inch straight track piece, showing the two racing lanes and connectors.

Image: A 4.48-inch straight track piece, showing the two racing lanes and connectors.

Image: A lane change track section, allowing cars to switch between the two racing lanes.

Image: A narrow track section, where the two lanes converge into a single, tighter path.

Setup and Assembly

This extension set is designed to integrate seamlessly with your existing Carrera GO!!! track system. Follow these general guidelines for assembly:

1. Plan Your Layout: Before connecting pieces, lay out your desired track configuration on a flat, stable surface. Consider how the new straight sections, narrow section, and lane changes will alter the flow of your race.
2. Connect Track Pieces: Align the connectors on the ends of the track pieces and gently push them together until they click securely. Ensure a tight connection for consistent electrical contact.
3. Install Supports: Use the provided fly over incline supports for any elevated sections of your track design. These supports ensure stability and proper track alignment for inclines and bridges.
4. Test Connections: After assembly, run a slot car slowly around the entire track to check for any loose connections or areas where cars might deslot. Adjust connections as needed.

Image: An example of an assembled track layout incorporating various extension pieces.

Operation

Once the extension pieces are integrated into your track and all connections are secure, operate your slot cars as usual. The new track sections will introduce new challenges and opportunities for strategic racing:

• Lane Changes: Utilize the lane change sections to overtake opponents or block their path.
• Narrow Section: Navigate the narrow section carefully, as it requires precise throttle control to avoid collisions or deslotting.
• Elevated Sections: Adjust speed when entering and exiting elevated sections to maintain control.

Maintenance

To ensure the longevity and optimal performance of your Carrera GO!!! track extension set, follow these maintenance tips:

• Cleaning: Regularly wipe down track surfaces with a clean, dry cloth to remove dust and debris. This helps maintain good electrical contact for the slot cars.
• Storage: When not in use, disassemble the track pieces carefully and store them in their original packaging or a suitable container to prevent damage. Avoid bending or forcing connections.
• Connection Integrity: Periodically inspect track connectors for any signs of wear or damage. Ensure they are clean and free of obstructions.

Troubleshooting

If you encounter issues with your track extension, consider the following:

• Cars Not Moving or Intermittent Power:
  • Check all track connections to ensure they are tight and secure.
  • Inspect the metal rails for dirt or corrosion; clean if necessary.
  • Ensure the power supply is correctly connected to the track and functioning.
• Cars Deslotting Frequently:
  • Reduce speed, especially on curves, narrow sections, and lane changes.
  • Check for uneven track surfaces or poorly connected pieces.
  • Ensure slot car guides are properly aligned and not worn.

Specifications

Warranty Information

This Carrera product comes with a 30-day warranty against manufacturer defects. Please retain your proof of purchase for warranty claims. For further details or to initiate a claim, refer to the official Carrera website or contact customer support.

Customer Support

For any questions, technical assistance, or replacement parts regarding your Carrera GO!!! 61601 Extension Set 2, please visit the official Carrera website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.