1. Introduction
Thank you for choosing the Peavey PVi 2 Dynamic Vocal Microphone. This microphone is designed for clear vocal reproduction in various settings, from live performances to recording. Its robust construction and user-friendly features make it an excellent choice for musicians, presenters, and audio enthusiasts. This manual provides essential information for setting up, operating, and maintaining your PVi 2 microphone.
2. Product Overview
The Peavey PVi 2 is a dynamic vocal microphone featuring a cardioid unidirectional polar pattern, designed to capture sound primarily from the front while rejecting off-axis noise. It includes a convenient on/off switch for easy control during use and comes with a 20-foot XLR cable for immediate connectivity.
Figure 1: Peavey PVi 2 Dynamic Vocal Microphone, showing the microphone, XLR cable, and microphone clip.
3. Setup
Follow these steps to set up your Peavey PVi 2 microphone:
- Unpack the Microphone: Carefully remove the microphone, XLR cable, and microphone clip from their packaging.
- Attach the Microphone Clip: Secure the microphone clip to a microphone stand (not included).
- Connect the XLR Cable:
- Locate the XLR input at the bottom of the microphone.
- Connect the female end of the provided 20-foot XLR cable to the microphone's XLR input. Ensure it clicks securely into place.
- Connect the male end of the XLR cable to an available XLR input on your mixer, audio interface, or amplifier.
- Position the Microphone: Place the microphone in the clip on the stand, ensuring it is stable and positioned correctly for your use.
4. Operating Instructions
Using your PVi 2 microphone is straightforward:
- Power On/Off: The microphone features an on/off switch located on its body. Slide the switch to the "ON" position to activate the microphone. Slide it to the "OFF" position to mute or power down the microphone when not in use.
- Microphone Technique:
- For optimal sound quality, speak or sing directly into the top of the microphone, maintaining a consistent distance of 2-6 inches (5-15 cm).
- Avoid covering the microphone grille with your hand, as this can affect sound quality and polar pattern.
- Due to its cardioid pattern, the microphone is less sensitive to sounds coming from the sides and rear, helping to reduce feedback and unwanted background noise.
- Adjusting Levels: Adjust the input gain on your mixer or audio interface to achieve a clear, strong signal without distortion.
5. Maintenance
Proper care will extend the life and performance of your microphone:
- Cleaning: Use a soft, dry cloth to wipe down the microphone body. For the grille, a soft brush can be used to gently remove dust or debris. Avoid using liquid cleaners directly on the microphone.
- Storage: Store the microphone in a dry, cool place, away from extreme temperatures and humidity. Use the original packaging or a protective pouch to prevent dust and physical damage.
- Cable Care: Avoid sharply bending or twisting the XLR cable. Coil it loosely when storing to prevent damage to the internal wiring.
6. Troubleshooting
If you encounter issues with your PVi 2 microphone, try these common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output | Microphone switch is OFF. Cable not connected properly. Mixer/interface input gain too low. | Slide the on/off switch to "ON". Ensure XLR cable is securely connected at both ends. Increase input gain on your audio device. |
| Poor sound quality / Distortion | Input gain too high. Microphone too far or too close. Damaged cable. | Reduce input gain on your audio device. Adjust distance to 2-6 inches from the sound source. Try a different XLR cable. |
| Feedback (howling sound) | Microphone too close to speakers. Speakers facing the microphone. Gain too high. | Move microphone further from speakers. Reposition speakers away from the microphone's front. Reduce input gain or master volume. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Peavey |
| Model Name | 00496360 |
| Polar Pattern | Unidirectional (Cardioid) |
| Connectivity Technology | Wired |
| Connector Type | XLR |
| Special Feature | On/off switch in handle |
| Material | Alloy Steel |
| Color | Black |
| Item Weight | 13.8 ounces (0.86 Pounds) |
| Product Dimensions (L x W x H) | 10.5 x 3.8 x 8.5 inches |
| Audio Sensitivity | 40 Decibels |
| Signal-to-Noise Ratio | 78 dB |
| Included Components | Microphone, 20' XLR Cable |
8. Warranty & Support
The Peavey PVi 2 Dynamic Vocal Microphone is covered by a manufacturer's warranty. For specific warranty details, registration, or technical support, please refer to the warranty card included with your product or visit the official Peavey website. Keep your proof of purchase for warranty claims.
For further assistance, you may contact Peavey customer service directly.
