Fishman Neo-D Single Coil Soundhole Acoustic Pickup User Manual

Introduction

The Fishman Neo-D Single Coil Soundhole Acoustic Pickup is a value-priced solution designed to provide exceptional string balance and sparkling acoustic clarity for your acoustic guitar. Utilizing a neodymium magnet structure, this low-profile, high-impedance pickup requires no battery, offering a simple and effective way to amplify your instrument. Its design allows for easy installation without requiring any permanent alterations to your guitar.

Key Features

• Passive Single-coil Magnetic Soundhole Pickup - Dark Brown finish.
• Offers excellent string-to-string balance and acoustic clarity.
• Low profile, high-impedance design eliminates the need for a battery.
• Easy installation with no alteration required, providing a plug-and-play experience right out of the box.

What's Included

• Pickup body (Fishman Neo-D Single Coil Soundhole Acoustic Pickup)

Setup and Installation

Physical Installation

The Fishman Neo-D pickup is designed for quick and easy installation into the soundhole of most acoustic guitars. No drilling or permanent modifications are necessary.

1. Carefully position the pickup within the soundhole of your acoustic guitar. Ensure the pickup is centered and does not obstruct the strings.
2. The pickup features two small screws and foam padding on its ends. These are used to gently secure the pickup in place by pressing against the inner edge of the soundhole.
3. Adjust the screws to expand the foam padding until the pickup is held firmly but not excessively tightly within the soundhole. The foam padding protects your guitar's finish.
4. Route the attached cable out of the soundhole. It is common practice to route it along the side of the guitar body and secure it with a strap or clip to prevent it from interfering with playing.

Figure 1: Top view of the Fishman Neo-D Single Coil Pickup, showing its sleek design and mounting screws.

Figure 2: Bottom view of the Fishman Neo-D Single Coil Pickup, highlighting the 'Single Coil' label and the foam padding for secure installation.

Connecting to an Amplifier or PA System

The Neo-D pickup features a standard 1/4-inch instrument jack. Connect this jack to your amplifier, mixer, or audio interface using a standard instrument cable.

• Ensure your amplifier or mixer is turned off or its volume is set to minimum before connecting the pickup.
• Plug one end of a 1/4-inch instrument cable into the jack of the Neo-D pickup.
• Plug the other end of the instrument cable into the input of your amplifier, mixer, or audio interface.
• Once connected, slowly increase the volume on your amplifier or mixer to your desired listening level.

Operation

The Fishman Neo-D Single Coil pickup is a passive device, meaning it does not require external power (like batteries) to operate. It converts the vibrations of your guitar strings into an electrical signal that can be amplified. Simply plug it in and play.

• Volume Control: Volume is controlled externally via your amplifier, mixer, or audio interface.
• Tone Control: Tone shaping is also done externally. Experiment with the EQ settings on your amplifier or mixer to achieve your desired sound.

Care and Maintenance

To ensure the longevity and optimal performance of your Fishman Neo-D pickup, follow these simple care guidelines:

• Cleaning: Wipe the pickup body with a soft, dry cloth to remove dust and fingerprints. Avoid using abrasive cleaners or solvents.
• Storage: When not in use, store the pickup in a clean, dry environment, away from extreme temperatures or humidity.
• Handling: Handle the pickup carefully to avoid dropping it or subjecting it to strong impacts, which could damage the internal components.
• Cable Care: Avoid sharp bends or kinks in the cable. Store the cable loosely coiled to prevent damage.

Troubleshooting

Technical Specifications

Warranty and Support

Fishman products are manufactured to high-quality standards. For information regarding warranty coverage, product registration, or technical support, please visit the official Fishman website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, you may also refer to the Fishman Store on Amazon.