1. Introduction
Thank you for purchasing the American DJ Par-36 Pin Spot. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new lighting fixture. The PL-1000 is a compact and robust pinspot designed to produce a narrow, focused beam of light, ideal for highlighting mirror balls, small displays, or specific architectural features.
Figure 1: American DJ Par-36 Pin Spot. This image shows the black, cylindrical pinspot from a slight angle, highlighting its front lens and the adjustable mounting bracket attached to its base.
2. Safety Information
WARNING: To prevent the risk of electric shock or fire, do not expose this unit to rain or moisture. Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.
- Always disconnect from main power before performing any service or maintenance.
- Ensure the unit is installed in an area with adequate ventilation.
- Do not operate the unit if the power cord is frayed, crimped, or damaged.
- Avoid direct eye exposure to the light source when the unit is operating.
- Allow sufficient cooling time before handling the lamp or internal components after operation. The lamp can reach high temperatures.
- This unit is designed for indoor use only.
3. Setup and Installation
3.1 Unpacking
Carefully unpack your new American DJ Par-36 Pin Spot and check the contents to ensure all parts are present and undamaged. The package should include the PL-1000 pinspot unit and a pre-installed 4515 6V 30W Par 36 lamp.
3.2 Mounting
The PL-1000 features a rugged metal housing with an integrated mounting bracket. This bracket allows for secure attachment to trussing, ceiling mounts, or other stable surfaces using appropriate clamps or screws (not included). Ensure the mounting surface can support the weight of the fixture (approximately 3.2 lbs / 1.5 kg).
- Position the pinspot in the desired location, ensuring it is stable and secure.
- Use the mounting bracket to attach the unit. The bracket has a hole for a mounting screw or clamp.
- Adjust the angle of the pinspot by loosening the side knob on the mounting bracket, positioning the light, and then tightening the knob to secure it.
3.3 Power Connection
The unit comes with a 4-foot (1.2m) power cord. Connect the power cord to a standard electrical outlet (120V AC, 60Hz). Ensure the power source matches the unit's requirements.
4. Operation
Operating the American DJ Par-36 Pin Spot is straightforward:
- Once the unit is securely mounted and connected to power, it will illuminate when power is supplied to the outlet.
- To turn the unit on or off, use an external switch or disconnect the power.
- Using Color Gels: The pinspot features a screw-on front cap, allowing easy access to the lamp and the insertion of color gels (sold separately).
- Ensure the unit is unplugged and cool to the touch.
- Carefully unscrew the front cap.
- Place the desired color gel in front of the lamp.
- Screw the front cap back on securely.
5. Maintenance
5.1 Lamp Replacement
The American DJ Par-36 Pin Spot uses a 4515 6V 30W Par 36 lamp. The average life of this lamp is approximately 1000 hours. When the lamp needs replacement, use a genuine American DJ LL-4515 replacement lamp.
- Disconnect Power: Always unplug the unit from the power source before attempting any maintenance.
- Allow Cooling: Let the unit cool down completely (at least 15-20 minutes) after operation before touching the lamp.
- Remove Front Cap: Unscrew the front cap of the pinspot.
- Remove Old Lamp: Carefully pull out the old Par 36 lamp from its socket. Avoid touching the glass of the new lamp with bare hands, as oils can reduce lamp life. Use a clean cloth or gloves.
- Install New Lamp: Insert the new LL-4515 lamp into the socket, ensuring it is seated firmly.
- Replace Front Cap: Screw the front cap back on securely.
- Test: Reconnect power and test the unit.
5.2 Cleaning
Regular cleaning helps maintain optimal performance and extends the life of the unit.
- Use a soft, lint-free cloth to wipe down the exterior of the unit.
- For the lens, use a soft cloth dampened with a mild glass cleaner. Do not spray cleaner directly onto the lens.
- Ensure all vents are clear of dust and debris to prevent overheating.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not light up. | No power, faulty lamp, loose connection. | Check power outlet. Ensure power cord is securely plugged in. Replace lamp if burnt out. |
| Light is dim or flickering. | Lamp nearing end of life, incorrect voltage, poor connection. | Replace lamp. Verify power supply voltage. Check all connections. |
| Unit overheats. | Poor ventilation, blocked vents. | Ensure adequate airflow around the unit. Clean any dust or debris from vents. |
If you experience issues not listed here, or if the problem persists after attempting the suggested solutions, please contact American DJ customer support or a qualified service technician.
7. Specifications
- Model: PL-1000
- Lamp: 4515 6V 30W Par 36
- Power Consumption: 30 Watts
- Power Source: Corded Electric
- Voltage: 120V AC, 60Hz (Standard US)
- Dimensions (LxWxH): 6.75" x 5.25" x 5.25" (172mm x 134mm x 134mm)
- Weight: 3.2 lbs (1.5 kg)
- Housing: Rugged Metal
- Features: Screw-on front cap for lamp access and color gels.
- Average Lamp Life: 1000 Hours
- UPC: 640282043724
8. Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official American DJ website. Keep your purchase receipt as proof of purchase for any warranty claims.
For technical assistance or replacement parts, please contact American DJ customer service directly. You can often find contact information on their official website or through your authorized dealer.
