Product Overview
The Wolo BA-52 Back-Up Alarm is designed to produce a loud beeping sound when your vehicle is put into reverse, enhancing safety by alerting pedestrians and other drivers to your vehicle's movement. Its compact size allows for easier installation in various 12-volt vehicles.
Figure 1: Wolo BA-52 Back-Up Alarm in its packaging, highlighting its beeping sound feature and compact design.
Key Features:
- Produces a loud beeping sound when vehicle is put into reverse.
- Small in size for easier installation.
- The warning sound can be a life saver.
- Easily installs to any 12-volt vehicle with one wire.
- Includes mounting bolt.
Setup and Installation
The Wolo BA-52 is designed for straightforward installation into any 12-volt vehicle. It requires only one wire for connection.
Kit Contents:
- Heavy-duty Mounting Bracket
- Mounting Hardware
- Easy-to-follow Instructions (also available as a PDF document)
For detailed installation instructions, please refer to the official Installation Manual PDF:
Download Installation Manual (PDF)
The alarm typically connects to the vehicle's reverse light circuit, activating automatically when the vehicle is shifted into reverse. Ensure a secure ground connection for optimal performance.
Operating the Back-Up Alarm
The Wolo BA-52 Back-Up Alarm operates automatically. Once properly installed, it will emit a distinct beeping sound whenever the vehicle's transmission is engaged in reverse gear. This sound serves as an audible warning to individuals in the vicinity of the vehicle, significantly increasing safety during backing maneuvers.
The primary function of this alarm is to provide a clear and consistent warning. No user interaction is required for its operation after installation.
Sound Demonstration:
Listen to a sound sample of the Wolo BA-52 Back-Up Alarm:
Video 1: A short sound clip demonstrating the beeping sound produced by the Wolo BA-52 Back-Up Alarm. This sample focuses on the sound characteristic, not its loudness in a real-world environment.
For a more comprehensive overview of the Wolo BA-52, including its features and benefits, please watch the official product video:
Video 2: Official product video for the Wolo (BA-52) Back-Up Alarm, detailing its features, ease of installation, and the safety benefits of its beeping sound.
Maintenance
The Wolo BA-52 Back-Up Alarm is designed to be a low-maintenance device. Once installed, it generally requires no routine maintenance.
- Regular Inspection: Periodically check the alarm unit and its wiring for any signs of damage, corrosion, or loose connections, especially if exposed to harsh weather conditions.
- Cleaning: If the unit becomes dirty, gently wipe it with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Water Resistance: While designed for exterior use, some users have noted that the unit's water resistance can be improved. Consider applying a suitable sealant around the wire entry point and over the speaker mesh if the alarm is installed in an area highly exposed to water and moisture to prolong its lifespan.
If the alarm stops functioning or produces an abnormal sound, inspect the wiring for proper connection and ensure the unit is free from physical damage or obstruction.
Troubleshooting
If your Wolo BA-52 Back-Up Alarm is not functioning as expected, consider the following troubleshooting steps:
- No Sound:
- Verify that the vehicle is in reverse gear.
- Check all electrical connections, ensuring they are secure and free from corrosion.
- Confirm that the alarm is receiving 12-volt power when the vehicle is in reverse. Use a multimeter to test the power wire.
- Ensure the ground connection is solid. A poor ground connection can prevent the alarm from sounding.
- Inspect the alarm unit for any visible damage or obstructions.
- Abnormal Sound (e.g., constant drone, intermittent):
- This can often indicate a faulty ground connection. Re-establish a clean and secure ground.
- Check for any loose internal components by gently shaking the unit (if safe to do so).
- Ensure the unit is not exposed to excessive moisture or water ingress, which can damage internal electronics.
- Sound Not Loud Enough:
- Confirm the alarm is mounted in an unobstructed location, facing outwards.
- Ensure the speaker mesh is clear of debris.
- While the BA-52 is designed to be loud, if a higher decibel commercial-grade alarm is required, consider other Wolo models like the BA-97.
If these steps do not resolve the issue, it may indicate a defective unit. Contact Wolo customer support for further assistance.
Specifications
| Specification | Detail |
|---|---|
| Brand | Wolo |
| Model | BA-52 (Back-Up Alarm Beep Beep Sound) |
| Manufacturer | Wolo Manufacturing Corp. |
| Voltage | 12 Volts |
| Item Weight | 5.6 ounces |
| Product Dimensions | 8.6 x 4.7 x 2.3 inches |
| Compatible Devices | 12-volt vehicles |
| Exterior Finish | Painted |
Warranty and Support
For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Wolo website. Warranty terms and conditions may vary.
Should you require technical support or have questions not covered in this manual, please contact Wolo customer service. You can find contact information on the Wolo brand store page or their official website.
