About Your Blender
The Proctor Silex 8-Speed Blender, Model 58130, is designed for various blending tasks. It features a 375-watt motor and a 48-ounce plastic jar. The jar is designed to store over the blender base, optimizing storage space.
Key Features
- 8-speed blender with 375-watt motor and pulse option for crushing ice.
- Stainless-steel blades for efficient blending.
- Simple-to-use rotary-dial control.
- Large 48-ounce plastic jar with strain/pour/close lid and 2-ounce filler-cap.
- Safety jar collar.
- Easy-to-clean base.
- Convenient cord wrap.
This image displays the assembled Proctor Silex 8-Speed Blender. It features a clear 48-ounce plastic blending jar with measurement markings, a white motor base, and a gray rotary dial for speed selection. The lid includes a removable filler cap.
Important Safeguards
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
- Read all instructions.
- To protect against risk of electrical shock, do not immerse cord, plug, or blender base in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
- Avoid contact with moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Keep hands and utensils out of container while blending to prevent the possibility of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
- Blades are sharp. Handle carefully.
- Always operate blender with lid in place.
- Do not blend hot liquids.
Setup
Understanding Your Blender Components
- Motor Base: Contains the motor and control dial.
- Blender Jar: 48-ounce plastic container for ingredients.
- Blade Assembly: Stainless steel blades located at the bottom of the jar.
- Lid: Covers the blender jar during operation.
- Filler Cap: Small removable cap in the lid for adding ingredients while blending.
Assembly Instructions
- Place the motor base on a clean, dry, and stable surface.
- Ensure the blade assembly is securely attached to the bottom of the blender jar.
- Place the blender jar onto the motor base, aligning the jar's base with the motor base. The jar should sit firmly.
- Place the lid securely on the blender jar. Ensure the filler cap is inserted into the lid opening.
Operating Instructions
Before First Use
Before using your blender for the first time, wash the blender jar, lid, and filler cap in warm, soapy water. Rinse thoroughly and dry. Wipe the motor base with a damp cloth.
Blending
- Ensure the blender is unplugged before adding ingredients.
- Add ingredients to the blender jar. Do not fill past the 48-ounce (6-cup) mark. For best results, add liquids first, then soft foods, then hard foods, and finally ice.
- Securely place the lid on the jar and insert the filler cap.
- Plug the blender into a standard electrical outlet.
- Turn the rotary dial to the desired speed setting (1-8) or to the 'P' (Pulse) setting for short bursts of power.
- Once blending is complete, turn the dial to 'OFF' and unplug the blender.
- Remove the lid and carefully pour out the blended contents.
Speed Settings
- Speeds 1-8: Provide continuous blending for various consistencies, from gentle mixing to powerful pureeing.
- Pulse (P): Offers short bursts of power at the highest speed, ideal for chopping, crushing ice, or controlling consistency. Release the dial to return to 'OFF'.
Maintenance
Cleaning the Blender Jar and Lid
- Unplug the blender before cleaning.
- Remove the blender jar from the motor base.
- Remove the lid and filler cap.
- Wash the jar, lid, and filler cap in warm, soapy water. Rinse thoroughly.
- For stubborn residue, fill the jar halfway with warm water and a drop of dish soap. Place the lid on, secure the jar on the base, and run on a low speed for a few seconds. Empty, rinse, and dry.
- The blade assembly can be carefully removed for more thorough cleaning if necessary. Handle blades with extreme caution as they are sharp.
Cleaning the Motor Base
Wipe the motor base with a damp cloth. Do not immerse the motor base in water or any other liquid. Dry thoroughly after cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on. | Not plugged in; power outlet not working; jar not properly seated. | Ensure blender is securely plugged in. Check power outlet with another appliance. Verify blender jar is correctly seated on the motor base. |
| Ingredients are not blending smoothly. | Too little liquid; too many ingredients; ingredients are too large. | Add more liquid. Reduce the amount of ingredients. Cut ingredients into smaller pieces. Use the Pulse function for better control. |
| Blender leaks from the bottom of the jar. | Blade assembly not tightened; gasket missing or improperly placed. | Ensure the blade assembly is securely tightened to the jar. Check that the gasket is correctly positioned between the blade assembly and the jar. |
| Motor smells or overheats. | Overloaded; continuous operation for too long. | Reduce the amount of ingredients. Allow the blender to cool down for at least 10-15 minutes before resuming use. Do not operate continuously for more than 2 minutes. |
Technical Specifications
- Brand: Proctor Silex
- Model Number: 58130
- Motor Power: 375 Watts
- Capacity: 48 Fluid Ounces (1.4 Liters)
- Number of Speeds: 8 + Pulse
- Control Type: Rotary Dial
- Blade Material: Stainless Steel
- Container Material: Plastic
- Product Dimensions: 11"D x 7"W (approximate)
- Item Weight: 4.12 pounds
Warranty and Support
Warranty Information
This Proctor Silex blender comes with a limited warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration of coverage.
Customer Support
For further assistance, troubleshooting not covered in this manual, or to inquire about warranty service, please contact Proctor Silex customer support. Contact details can typically be found on the product packaging or the official Proctor Silex website.