Revlon RV261 Ionic Professional Hairsetter User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective use of your Revlon RV261 20-Roller Ionic Professional Hairsetter. Please read all instructions carefully before use and retain this manual for future reference.

The Revlon RV261 features ionic technology for fast styling and conditioning, 20 ribbed rollers in three sizes, and cool-touch roller ends for comfortable handling. It is designed to help you achieve beautiful, lasting curls.

Important Safety Information

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

• Always unplug the appliance immediately after using.
• Do not use while bathing or in a shower.
• Do not place or store appliance where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• Do not reach for an appliance that has fallen into water. Unplug immediately.
• Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water.
• Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
• Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
• Never use while sleeping.
• Never drop or insert any object into any opening.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• Do not use an extension cord with this appliance.
• Do not touch hot surfaces. Use handles or knobs.
• Allow rollers to cool before handling or storing.

Package Contents

• 1 x Revlon RV261 Hairsetter Base Unit
• 20 x Ribbed Rollers (in 3 sizes)
• 20 x Firm-hold Metal Roller Clips
• 1 x Clear Protective Cover

Image: The Revlon RV261 Hairsetter base unit with its clear protective cover and rollers in place.

Product Overview

The Revlon RV261 Hairsetter is designed for efficient and effective hair styling. Key components include:

• Heated Base: Contains heating elements for the rollers.
• Ionic Technology: Helps reduce frizz and enhance shine.
• On/Off Switch with Indicator Light: For easy operation and status indication.
• Ribbed Rollers: Available in three sizes for varied curl patterns.
• Cool-Touch Ends: Allow for safe handling of hot rollers.
• Metal Clips: Secure rollers in place without leaving crimp marks.
• Clip Storage: Integrated storage for convenience.

Image: A collection of the ribbed hair rollers in different sizes, along with the U-shaped metal clips.

Setup

1. Place the hairsetter on a firm, flat, heat-resistant surface.
2. Ensure the "ON/OFF" switch is in the "OFF" position.
3. Insert the rollers onto the heating posts. Ensure they are seated properly.
4. Plug the power cord into a standard electrical outlet.

Operating Instructions

Heating the Rollers

1. With rollers in place, turn the "ON/OFF" switch to the "ON" position. The indicator light will illuminate.
2. Allow the rollers to heat for approximately 10 minutes, or until they are hot to the touch (using the cool-touch ends).

Applying the Rollers

Follow these steps for optimal curling results:

1. Prep hair by washing and towel-drying.
2. Section hair and wrap each section around a roller, starting from the roots.
3. Use the 'Easy-wrap' feature to secure the roller.
4. For ionic rollers, use the 'Fast heat-up' feature to set the rollers.
5. Allow rollers to sit in hair for 15-30 minutes, or until hair is fully dry and styled.
6. Remove rollers carefully to avoid tangling or disrupting the style.

After Use

1. Turn the "ON/OFF" switch to the "OFF" position and unplug the unit from the electrical outlet.
2. Allow the rollers and the unit to cool completely before storing.

Maintenance

Cleaning

• Ensure the hairsetter is unplugged and completely cool before cleaning.
• Wipe the base unit with a damp cloth. Do not immerse the unit in water.
• Rollers can be wiped clean with a damp cloth. Ensure they are dry before placing them back on the heating posts.
• Do not use abrasive cleaners or solvents.

Storage

• Store the hairsetter in a cool, dry place.
• Do not wrap the cord around the appliance. Allow the cord to hang freely or use the integrated cord wrap.
• Keep the clear protective cover on the unit to protect the rollers from dust.

Troubleshooting

Specifications

• Model: RV261
• Brand: REVLON
• Technology: Ionic
• Roller Count: 20
• Roller Sizes: 3 (various sizes)
• Dimensions: 7 x 12 x 5 inches (Product Dimensions)
• Weight: 3 Pounds
• Material: Metal (clips), Plastic (rollers, base)
• Power: Standard electrical outlet (implied by corded appliance)

Warranty and Support

For warranty information or product support, please refer to the warranty card included with your purchase or visit the official REVLON website. Keep your purchase receipt as proof of purchase for any warranty claims.

You can also visit the REVLON Store on Amazon for more information and product details.