Introduction
This manual provides instructions for the installation and maintenance of the Dirt Devil Style 10 Vacuum Belt (Part # 3860140600). These belts are designed for specific Dirt Devil vacuum cleaner models to ensure optimal performance and efficient cleaning. Regular replacement of the vacuum belt is essential for maintaining the effectiveness of your vacuum's brush roll and suction.
Image: A single black Dirt Devil Style 10 vacuum belt, circular in shape, against a white background.
Safety Information
- Always unplug the vacuum cleaner from the electrical outlet before performing any maintenance or belt replacement.
- Allow the vacuum to cool down if it has been recently used.
- Wear appropriate personal protective equipment, such as gloves, if desired.
- Keep small children and pets away from the work area during maintenance.
Compatibility
The Dirt Devil Style 10 Vacuum Belt (Part # 3860140600) is compatible with the following Dirt Devil vacuum cleaner models:
- All Featherlite Bagless models
- Featherlite Vision models
- Vision Lite models
- Vision Turbo models
Image: Front of the Dirt Devil Style 10 vacuum belt packaging, showing compatibility with various Featherlite and Vision models.
Installation Instructions
Follow these steps to replace the vacuum belt. Refer to the diagrams for visual guidance.
Image: Back of the Dirt Devil Style 10 vacuum belt packaging, displaying four diagrams for belt replacement.
- Remove Nozzle Guard (Diagram 1):
Unplug the vacuum. Turn the vacuum over. Locate and remove the nozzle guard. This typically involves unscrewing or unlatching it. For specific instructions on removing the nozzle guard, consult your vacuum cleaner's model-specific manual.
- Replace Belt on Motor Shaft (Diagram 2):
Carefully remove the old belt from the motor shaft and discard it. Place the new Style 10 belt onto the motor shaft. Ensure it is seated correctly.
- Replace Belt on End Cap (Diagram 3):
Position the new belt around the brush roll. For models with an end cap, ensure the belt is correctly placed within the end cap mechanism.
- Seat Brush Roll (Diagram 4):
With the belt properly positioned on both the motor shaft and the brush roll, carefully reinsert the brush roll into its housing. Ensure the brush roll spins freely and the belt is taut. Reattach the nozzle guard securely. The belt should be tight to ensure proper operation of the brush roll.
Maintenance
To ensure optimal performance of your Dirt Devil vacuum cleaner, it is recommended to replace the Style 10 vacuum belt every 3 to 6 months, or sooner if signs of wear, stretching, or breakage are observed. A worn belt can lead to reduced brush roll effectiveness and decreased cleaning performance.
Troubleshooting
- Brush Roll Not Spinning: If the brush roll is not spinning, the belt may be broken, stretched, or improperly installed. Unplug the vacuum and inspect the belt. Replace if necessary, following the installation instructions.
- Reduced Suction/Cleaning Performance: A worn or slipping belt can cause the brush roll to slow down, leading to poor cleaning. Replace the belt to restore optimal performance.
- Burning Smell: A burning smell often indicates a slipping or damaged belt. Immediately unplug the vacuum and inspect the belt. Replace any damaged belts.
Specifications
| Model Name: | 3-860140-600 |
| Part Number: | 3-860140-600 |
| Belt Style: | Style 10 |
| Color: | Black |
| Material: | Plastic |
| Compatible Devices: | Dirt Devil Vacuum Cleaners (Featherlite Bagless, Featherlite Vision, Vision Lite, Vision Turbo models) |
| Manufacturer: | Dirt Devil |
| Included Components: | Dirt Devil Style 10 Vacuum Belt |
Warranty Information
This product comes with a manufacturer's warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the original product packaging or contact Dirt Devil customer support directly. Proof of purchase may be required for warranty claims.
Support
For further assistance, technical support, or to inquire about other Dirt Devil products, please visit the official Dirt Devil website or contact their customer service department. Always refer to your specific vacuum cleaner model's manual for detailed instructions on disassembly and reassembly.
Official Website: www.dirtdevil.com
Note: The UPC "0046034885480" is associated with this product.
