1. Introduction
The Clore Automotive SOLAR 1002 is a 1.5 Amp, 12V automatic onboard battery charger designed for convenient and efficient battery maintenance. This unit is engineered to be permanently mounted to your battery, providing a simple plug-and-play solution for charging and maintaining your vehicle's battery.
Key features include:
- Permanently mountable design for direct battery connection.
- Automatic operation, eliminating the need for manual button presses.
- Simple plug-in functionality using an extension cable for fast, automatic charging and maintaining.
- Includes a battery attachment kit for easy installation.
2. Important Safety Instructions
WARNING:
- Read all warning information and the instruction manual thoroughly before operating this device.
- This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always wear eye protection when working with batteries.
- Ensure proper ventilation when charging batteries.
- Do not expose the charger to rain or excessive moisture.
- Disconnect power before making or breaking connections to the battery.
3. Package Contents
Verify that all items are present in the package:
- Clore Automotive SOLAR 1002 1.5 Amp 12V Automatic Onboard Battery Charger
- Battery attachment kit (ring terminals)
4. Product Overview
Figure 4.1: Overview of the SOLAR 1002 charger, showing the main unit, AC power cord, and battery ring terminal connectors.
Figure 4.2: Close-up of the SOLAR 1002 unit, highlighting the "Status Center" LEDs and model number.
The SOLAR 1002 features a compact design with integrated cables for both AC power input and DC battery connection. The unit includes a "Status Center" with indicator lights to provide real-time feedback on the charging process and battery status.
- AC Power Cord: Connects to a standard 120V AC outlet.
- DC Output Cables: Terminate with ring connectors for permanent attachment to battery terminals.
- Status Center LEDs: Indicate charging status, battery condition, and potential warnings.
5. Setup
- Prepare the Battery: Ensure the battery terminals are clean and free of corrosion.
- Connect to Battery: Using the included battery attachment kit (ring terminals), securely connect the positive (+) ring terminal to the positive battery post and the negative (-) ring terminal to the negative battery post. Ensure connections are tight.
- Mount the Charger: The SOLAR 1002 is designed for permanent onboard mounting. Choose a secure, dry location near the battery, away from excessive heat or moving parts. Use appropriate fasteners (not included) to mount the unit.
- Power Connection: The charger's AC power cord is short to facilitate permanent installation. For charging, simply plug an extension cord into the charger's AC plug. Ensure the extension cord is rated for outdoor use if exposed to elements and is of appropriate gauge for the distance.
Figure 5.1: Example of the SOLAR 1002 charger installed and connected to a vehicle battery.
6. Operating Instructions
The SOLAR 1002 operates automatically once connected to the battery and plugged into an AC power source. There are no buttons to press or settings to adjust.
- Connect to AC Power: Plug the charger's AC power cord into a standard 120V AC wall outlet or a suitable extension cord.
- Monitor Status: Observe the "Status Center" LEDs on the charger unit:
- Battery Icon (Green): Indicates the battery is fully charged and being maintained.
- Charging Icon (Orange/Yellow): Indicates the battery is currently charging.
- Warning/Error Icon (Red Triangle): Indicates a fault or issue. Refer to the Troubleshooting section.
- Automatic Maintenance: The charger will automatically switch to maintenance mode once the battery is fully charged, ensuring optimal battery health without overcharging.
7. Maintenance
The SOLAR 1002 is designed for minimal maintenance. Follow these guidelines to ensure longevity:
- Keep the charger unit clean and free of dirt, dust, and moisture. Wipe with a dry cloth as needed.
- Periodically inspect the cables and connections for any signs of damage, fraying, or corrosion.
- Ensure the charger is mounted securely and not exposed to excessive vibration or impact.
- Store the charger in a dry environment when not in use for extended periods, although it is designed for permanent installation.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not turning on / No LEDs illuminated. | No AC power; faulty connection; charger malfunction. | Check AC outlet and extension cord. Ensure all connections are secure. If problem persists, contact support. |
| Red Warning/Error LED is illuminated. | Reverse polarity connection; short circuit; battery fault. | Disconnect from AC power. Verify positive and negative connections are correct. Inspect cables for damage. If battery is severely discharged or faulty, it may not accept a charge. |
| Charger struggles in cold conditions. | Extreme cold affecting charger or battery performance. | Ensure the charger unit itself is not exposed to extreme cold for prolonged periods before plugging in. If possible, allow the charger to warm up slightly before use in very cold environments. Battery performance is also reduced in cold. |
| Battery not fully charging or taking too long. | Battery capacity too large for charger; deeply discharged battery; battery sulfation. | This 1.5 Amp charger is designed for maintenance and slow charging. For larger or deeply discharged batteries, a higher amperage charger may be needed. Allow sufficient time for charging. Consider professional battery testing. |
9. Specifications
- Model: 1002
- Input Voltage: 120V AC
- Output Voltage: 12 Volts (DC)
- Output Current: 1.5 Amp
- Product Dimensions: 6.7 x 5.5 x 2.2 inches (17.0 x 14.0 x 5.6 cm)
- Item Weight: 12.4 ounces (351.5 grams)
- Safety Certification: UL Listed
- Manufacturer: Clore Automotive
10. Warranty and Support
Clore Automotive products are manufactured to high standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Clore Automotive website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Clore Automotive customer service. You can find contact information on their official website or through your product's purchase platform.
Clore Automotive Official Website: www.cloreautomotive.com
