Introduction
The Chef'sChoice ScissorPro Electric Scissors Sharpener Model 500 is designed to quickly and easily sharpen a wide variety of household scissors. Utilizing 100% diamond abrasives and precision angle guides, this sharpener creates a durable, professional-quality edge on both conventional and knife-edge scissors. It is suitable for both right-handed and left-handed users and eliminates the need to disassemble scissors for sharpening.
The Chef'sChoice ScissorPro Electric Scissor Sharpener Model 500.
Important Safeguards
When using electrical appliances, basic safety precautions should always be followed, including the following:
- Read all instructions carefully before using the sharpener.
- To protect against electrical hazards, do not immerse the sharpener in water or other liquid.
- Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
- Avoid contact with moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact customer service for examination, repair, or electrical or mechanical adjustment.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let the cord hang over the edge of a table or counter or touch hot surfaces.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not sharpen barber shears, pinking shears, or scallop-edge shears with this device.
Setup
Before first use, ensure the sharpener is placed on a stable, flat surface.
- Unpack the ScissorPro sharpener and inspect it for any damage.
- Ensure the power switch is in the "OFF" position.
- Plug the sharpener into a standard AC outlet.
Side view of the sharpener, showing the power switch in the 'OFF' position.
Operating Instructions
The ScissorPro features two sharpening stages: Stage 1 (Coarse) for dull or damaged blades, and Stage 2 (Fine) for honing and finishing the edge.
General Sharpening Procedure:
- Clean Scissors: Ensure scissors are clean and free of debris, glue, or rust before sharpening.
- Power On: Turn the sharpener ON using the power switch.
- Identify Blade Sides: For most scissors, one blade is typically flat (the "male" blade) and the other has a bevel (the "female" blade). The ScissorPro is designed to sharpen both.
- Sharpening in Stage 1 (Coarse):
- Insert the scissor blade into the appropriate slot in Stage 1 (Coarse). The sharpener's internal guides will hold the blade at the correct angle.
- Slowly pull the scissor blade through the slot, maintaining light, consistent pressure. Perform 2-4 pulls per blade, alternating between the left and right slots of Stage 1.
- For very dull or damaged scissors, more pulls may be necessary.
- Sharpening in Stage 2 (Fine):
- After using Stage 1, move to Stage 2 (Fine). This stage hones the edge for maximum sharpness.
- Insert the scissor blade into the appropriate slot in Stage 2.
- Perform 1-2 slow, light pulls per blade, alternating between the left and right slots of Stage 2.
- Test Sharpness: Test the scissors on a piece of paper or fabric. If not sufficiently sharp, repeat Stage 2.
- Power Off: Turn the sharpener OFF when finished.
A pair of orange-handled scissors being sharpened in the ScissorPro's fine slot.
Detailed view of the 'COARSE' (Stage 1) and 'FINE' (Stage 2) sharpening slots.
Diagram showing the proper technique for pulling a scissor blade through the sharpening slot.
Tips for Best Results:
- Always pull the blade slowly and steadily through the slot. Do not push or rock the blade.
- Apply only light downward pressure. The sharpener's internal springs and magnets (Magne-Flex technology) are designed to guide the blade correctly.
- For scissors with very thick blades, you may need to apply slightly more pressure.
- The ScissorPro is safe for quality scissors and will not distemper the blades due to the rotating diamond abrasives.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your ScissorPro sharpener.
- Cleaning: Unplug the sharpener before cleaning. Wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Dust Removal: Periodically, turn the sharpener upside down and gently tap it to dislodge any metal dust that may have accumulated inside.
- Storage: Store the sharpener in a dry, safe place away from children.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sharpener does not turn on. | Not plugged in, power switch off, or power outlet issue. | Ensure the unit is securely plugged into a working outlet. Check the power switch is in the "ON" position. Test the outlet with another appliance. |
| Scissors are not getting sharp. | Incorrect sharpening technique, insufficient passes, or extremely dull/damaged blades. | Review operating instructions. Ensure slow, consistent pulls with light pressure. Perform more passes in Stage 1 for very dull blades. Ensure blades are clean. |
| Grinding noise or unusual operation. | Internal component issue or debris. | Immediately turn off and unplug the unit. Do not attempt to repair. Contact customer service for assistance. |
| Scissor blades feel rough after sharpening. | Insufficient honing in Stage 2. | Perform additional light passes through Stage 2 (Fine) to refine the edge. |
Specifications
- Model: 500
- Brand: Chef's Choice
- Material: Diamond abrasives
- Color: White
- Product Dimensions: 9.7"L x 5.8"W x 5.4"H
- Item Weight: Approximately 2.9 Pounds (2.86 pounds)
- Grit Type: Fine (for Stage 2)
- Sharpening Stages: 2-Stage (Coarse and Fine)
- Power Source: AC (standard outlet)
- Manufacturer: Chef'sChoice
- UPC: 728131125033, 781147817903, 793842123364, 745577794418, 735343548697, 087877005000
- ASIN: B0001FLUAI
Product dimensions of the ScissorPro sharpener.
Warranty and Support
The Chef'sChoice ScissorPro Electric Scissors Sharpener Model 500 is covered by a one-year limited warranty from the date of purchase. This warranty covers defects in material and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, or unauthorized service.
For warranty claims, technical support, or replacement parts, please contact Chef'sChoice customer service. Keep your proof of purchase for warranty validation.
Manufacturer: Chef'sChoice