Texas Instruments TI-84 Plus

Download PDF
Contents

Texas Instruments TI-84 Plus Graphics Calculator User Manual

Model: TI-84 Plus

Brand: Texas Instruments

Introduction

The Texas Instruments TI-84 Plus is an all-purpose graphing calculator designed for students and professionals in mathematics and science. It features a high-contrast display, a fast processor, and ample memory for complex calculations and data analysis. This manual provides essential information to help you set up, operate, and maintain your TI-84 Plus calculator.

Texas Instruments TI-84 Plus graphing calculator displaying a geometry graph.
The TI-84 Plus calculator, showcasing its display with a geometric graph, indicating its capability for interactive geometry exploration.

Setup

Battery Installation

Your TI-84 Plus calculator requires four AAA alkaline batteries for primary power and one silver oxide battery for memory backup. To install or replace batteries:

  1. Locate the battery compartment cover on the back of the calculator.
  2. Slide the cover off to reveal the battery slots.
  3. Insert four AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. The silver oxide backup battery (typically a CR2032 or SR44SW) is located in a smaller, separate compartment. Use a small screwdriver to open this compartment and replace the battery if necessary. This battery preserves your memory settings and data.
  5. Replace the battery compartment cover, ensuring it clicks securely into place.
Back of the TI-84 Plus calculator with the battery cover removed, showing the AAA battery slots and the backup battery compartment.
The rear view of the TI-84 Plus, illustrating the main battery compartment for four AAA batteries and the smaller, circular slot for the memory backup battery.

Initial Power-On

After installing the batteries, press the ON button located at the bottom left of the keypad to power on your calculator. The screen should display the home screen or the last active application.

Operating the Calculator

Basic Operations

The TI-84 Plus supports standard arithmetic operations, scientific functions, and advanced mathematical computations. Use the numeric keypad for input and the function keys for specific operations. The ENTER key executes commands.

Graphing Functions

The calculator allows you to define, save, graph, and analyze up to ten graphing functions simultaneously. Use the Y= key to enter functions, WINDOW to set graph parameters, and GRAPH to display the graph. The split-screen option enables simultaneous viewing of a graph and its corresponding equation or table of values.

Preloaded Applications

The TI-84 Plus comes with several preloaded applications to enhance its functionality. These include:

  • Cabri Jr.: Interactive geometry software for exploring geometric concepts.
  • CBL/CBR: For connecting to data collection devices.
  • Conic Graphing: Simplifies graphing of conic sections.
  • Inequality Graphing: Allows graphing and shading of inequalities.
  • Probability Simulations: Tools for simulating probability experiments.
  • Science Tools: Useful for scientific calculations and conversions.
  • StudyCards: For creating and using flashcards.
  • TimeSpan: For time-value-of-money calculations.
  • Topics in Algebra 1 Chapters 1-4 & 5: Supplemental content for algebra studies.
  • Transformation Graphing: Explores transformations of functions.

Access these applications by pressing the APPS key and selecting the desired program from the menu.

Maintenance

Cleaning

To ensure optimal performance and longevity, keep your calculator clean. Use a soft, dry cloth to wipe the screen and keypad. For stubborn dirt or dust between buttons, a soft brush or compressed air can be used. Avoid using harsh chemicals or abrasive materials, as these can damage the calculator's surface or screen.

Battery Replacement

Replace the four AAA batteries when the display dims or the calculator fails to power on. The silver oxide backup battery typically lasts for many years and rarely needs replacement, as it primarily maintains memory when the main batteries are removed or depleted.

Troubleshooting

If your TI-84 Plus calculator experiences issues, consider the following common solutions:

  • Calculator not turning on: Check if the AAA batteries are correctly installed and have sufficient charge. Replace them if necessary.
  • Screen is blank or dim: Adjust the display contrast by pressing 2nd then UP (for darker) or DOWN (for lighter). If this doesn't work, replace the AAA batteries.
  • Calculator freezes or behaves erratically: Try resetting the calculator. This can often be done by pressing the RESET button on the back (requires a paperclip or similar pointed object) or by removing and reinserting the batteries. Note that a full reset may clear all memory.
  • Graphing issues: Ensure your function equations are correctly entered and that the window settings (WINDOW key) are appropriate for the function you are trying to graph.

For more detailed troubleshooting, refer to the official user guide available as a PDF: TI-84 Plus User Guide (PDF).

Specifications

Key Specifications of the TI-84 Plus
FeatureDetail
Display320 x 240 pixels (2.8" diagonal), 8 lines x 16 characters
Memory24 KB RAM, 480 KB Flash ROM
Power Source4 AAA batteries (primary), 1 Lithium Metal battery (backup)
Dimensions (L x W x H)7.8 x 6.06 x 1.34 inches
Item Weight15.2 ounces
ConnectivityUSB port, I/O port
Preloaded Apps12 apps including Cabri Jr., Probability Simulations, Science Tools
Hand holding the TI-84 Plus calculator, showing its approximate size.
The TI-84 Plus calculator held in a hand, illustrating its compact and portable design for ease of use.

The TI-84 Plus is designed for durability and long-lasting performance in educational and professional environments. It is permitted for use on various standardized tests, including SAT, ACT, AP, and IB exams.

Warranty and Support

The Texas Instruments TI-84 Plus Graphics Calculator comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or additional resources, please visit the official Texas Instruments education website or contact their customer service. Extensive support materials, including detailed guidebooks, tutorials, and software updates, are available online.

Additional product information and resources can be found at: education.ti.com/84-info.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.