Introduction
This manual provides detailed instructions for the safe and efficient use of your Braun WK600 Brushed Stainless Steel Electric Kettle. Please read all instructions carefully before first use and retain for future reference. This appliance is designed for boiling water and operates on a 220-240 Volt electrical supply. It is not intended for use with 110-120 Volt systems.
Important Safety Instructions
- Read all instructions before using the appliance.
- Ensure the voltage indicated on the appliance corresponds to your local mains voltage before connecting. This kettle operates on 220-240V.
- Do not immerse the kettle, power base, cord, or plug in water or any other liquid.
- Keep the appliance out of reach of children.
- Do not operate the kettle if the cord or plug is damaged, or if the appliance malfunctions or has been damaged in any manner.
- Place the kettle on a firm, flat, heat-resistant surface.
- Do not fill above the maximum fill line or below the minimum fill line to prevent boiling dry or overflow.
- Always close the lid securely before operating.
- Exercise caution when pouring hot water.
- Unplug the kettle from the outlet when not in use and before cleaning.
Product Overview
Familiarize yourself with the components of your Braun WK600 Electric Kettle:
- Spout
- Lid
- Lid Release Button
- Handle
- Water Level Indicator (visible on both sides)
- On/Off Switch with Pilot Light
- Power Base with Cord Storage
- Washable Limestone Scale Filter (inside spout)
Setup
- Unpacking: Carefully remove the kettle and all accessories from the packaging. Dispose of packaging materials responsibly.
- Initial Cleaning: Before first use, fill the kettle with fresh water to the maximum level. Boil the water, then discard it. Repeat this process two to three times to remove any manufacturing residues.
- Positioning: Place the power base on a stable, flat, and dry surface, away from the edge of the countertop. Ensure the cord is not dangling where it can be pulled or tripped over.
Operating Instructions
- Filling the Kettle: Press the lid release button to open the lid. Fill the kettle with the desired amount of fresh water. Do not fill below the minimum mark or above the maximum mark on the water level indicator. The kettle has a 1.7 liter capacity. Close the lid firmly until it clicks.
- Placing on Power Base: Place the kettle securely onto the power base. The 360-degree cordless operation allows you to place it in any direction.
- Boiling Water: Plug the power cord into a 220-240V electrical outlet. Press the On/Off switch downwards. The pilot light will illuminate, indicating that the kettle is heating.
- Automatic Shut-off: The kettle will automatically switch off once the water has boiled. The pilot light will extinguish. You can also manually switch off the kettle by lifting the On/Off switch.
- Pouring: Carefully lift the kettle from its base and pour the hot water. Be mindful of steam escaping from the spout.
Cleaning and Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your kettle.
- Before Cleaning: Always unplug the kettle from the power outlet and allow it to cool completely before cleaning.
- Exterior Cleaning: Wipe the exterior of the kettle with a damp cloth. Do not use abrasive cleaners or scouring pads, as these can damage the brushed stainless steel finish. The product care instructions specify "Hand wash, Wipe clean".
- Interior Cleaning/Descaling: Over time, mineral deposits (limescale) may build up inside the kettle, especially in hard water areas. The kettle features a washable limestone scale filter. To clean the filter, remove it from the spout and rinse under running water. For descaling the kettle interior:
- Fill the kettle with a mixture of one part white vinegar and two parts water.
- Bring the mixture to a boil and then let it stand for at least 30 minutes, or longer for heavy scale.
- Empty the kettle and rinse thoroughly with fresh water several times.
- If necessary, repeat the process. Commercial descaling solutions can also be used following their instructions.
- Storage: When not in use, store the kettle in a dry place. The power base has cord storage to keep the cord tidy.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not heat up. | Not plugged in; On/Off switch not pressed; No power at outlet; Kettle not properly seated on base. | Ensure plug is firmly in a 220-240V outlet; Press On/Off switch; Check household fuse/circuit breaker; Re-seat kettle firmly on power base. |
| Kettle switches off before boiling. | Kettle has limescale buildup; Kettle was filled below minimum level. | Descale the kettle (refer to Cleaning and Maintenance); Ensure kettle is filled above the minimum mark. |
| Water leaks from the base or indicator. | Overfilling the kettle; Damage to the kettle body or water level indicator seal. | Do not fill above the maximum level. If leakage persists, discontinue use and contact customer service. |
| Pilot light does not illuminate. | Pilot light malfunction; Kettle not receiving power. | If kettle still heats, the pilot light may need service. Otherwise, check power supply as above. |
Specifications
- Brand: Braun
- Model Number: WK600
- Capacity: 1.7 Liters
- Power: 2200 Watts
- Voltage: 220-240 Volts
- Material: Brushed Stainless Steel
- Finish Type: Brushed
- Product Dimensions: 9.66 x 12.8 x 7.8 inches
- Item Weight: 4 Pounds
- Product Care Instructions: Hand wash, Wipe clean
- Manufacturer: Gandhi - Appliances
Warranty and Support
For warranty information, product support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Braun website. You may also contact Braun customer service directly for assistance.
Manufacturer: Gandhi - Appliances
